journal article·2023-11Open access

Achieving high strength-ductility synergy in a dilute Mg-Gd-Zn-Zr alloy with heterogeneous structure via hot extrusion

Yajie Ma, Chuming Liu, Shunong Jiang, Yingchun Wan, Yonghao Gao, Zhiyong Chen, Zuming Liu

Abstract

The common problem of low tensile yield strength (TYS) prevails in high ductility dilute-alloying Mg-RE alloys prepared by traditional hot extrusion. The design strategy of heterostructures in the microstructure of Mg alloys can effectively improve the strength-ductility synergy in mechanical properties, which is expected to break the trade-off dilemma between strength and ductility. In this work, we successfully prepared a series of high ductility as-extruded Mg-Gd-Zn-Zr alloys with all elongations (ELs) greater than 26.0% at room temperature. By controlling the extrusion process and thus introducing heterogeneous fiberous structure, we finally obtained a superior Mg-1.5Gd-0.5Zn-0.5Zr (wt.%) alloy with strength-ductility synergy, which exhibits a TYS of 246 MPa, ultimate tensile strength (UTS) of 274 MPa and an EL of 29.0%. The microstructure examination for the alloy with the heterostructure reveals that the structure consists of alternating filamentous deformed-grain and fine-grain layers. The overall fine grains in the microstructure, a large amount of nanoprecipitates and the relatively high density of residual dislocations contribute to the high TYS of the alloy. The alloy maintaining high ductility is attributed to the activation of multiple slip systems, especially the active and mobile dislocations, the inhibition of the P-type dislocation to B-type dislocation transition, {10 1¯ 2} tensile twinning generated early during tensile testing, and full intergranular slip transfers caused by high geometric compatibility. The present work can further promote the development of dilute-alloying Mg-RE alloys with high strength-ductility synergy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Mechanistic origin and prediction of enhanced ductility in magnesium alloys10.1126/science.aap8716 ↗
2. High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy10.1080/21663831.2022.2133976 ↗
3. Plastic deformation mechanism and hardening mechanism of rolled Rare-Earth magnesium alloy thin sheet10.1016/j.matdes.2022.110678 ↗
4. Unveiling the deformation mechanism of highly deformable magnesium alloy with heterogeneous grains10.1016/j.scriptamat.2022.114963 ↗
5. Designing high ductility in magnesium alloys10.1016/j.actamat.2019.04.019 ↗
6. Sustainability through alloy design: challenges and opportunities10.1016/j.pmatsci.2020.100722 ↗
7. Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength-ductility synergy10.1016/j.jmst.2021.09.065 ↗
8. Heterogeneous fiberous structured Mg-Zn-Zr alloy with superior strength-ductility synergy10.1016/j.jmst.2022.06.021 ↗
9. Development and characteristics of a low rare-earth containing magnesium alloy with high strength-ductility synergy10.1016/j.jma.2022.01.005 ↗
10. Achieving gradient heterogeneous structure in Mg alloy for excellent strength-ductility synergy
11. Effect of ECAP process on as-cast and as-homogenized Mg-Al-Ca-Mn alloys with different Mg2Ca morphologies10.1016/j.jallcom.2019.04.202 ↗
12. Development of low-alloyed Mg-Zn-Ca-Sn-Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling10.1016/j.jallcom.2020.157317 ↗
13. Mechanical properties and deformation mechanisms of a novel fine-grained Mg-Gd-Y-Ag-Zr-Ce alloy with strength-ductility synergy10.1016/j.jmst.2020.05.028 ↗
14. Enhanced strength-ductility synergy achieved through twin boundary pinning in a bake-hardened Mg-2Zn-0.5Ca alloy10.1016/j.msea.2021.142239 ↗
15. Achieving high strength-ductility synergy in a Mg97Y1Zn1Ho1 alloy via a nano-spaced long-period stacking-ordered phase10.1016/j.jma.2022.01.002 ↗
16. Effect of extrusion parameters on microstructure, mechanical properties and damping capacities of Mg-Y-Zn-Zr alloy10.1016/j.jallcom.2022.168122 ↗
17. A rolled Mg-8Al-0.5Zn-0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries10.1016/j.jma.2021.12.008 ↗
18. Developing a Mg alloy with ultrahigh temperature ductility via grain boundary segregation and activation of non-basal slips10.1016/j.ijplas.2023.103548 ↗
19. The synergy of boundary engineering and segregation strategy towards high strength and ductility Mg-3Gd alloy10.1016/j.jallcom.2019.153051 ↗
20. Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion10.1016/j.msea.2016.04.093 ↗
21. Effects of extrusion parameters on the microstructure, corrosion resistance, and mechanical properties of biodegradable Mg-Zn-Gd-Y-Zr alloy
22. Microstructure and mechanical properties of a high ductility Mg-Zn-Mn-Ce magnesium alloy10.1016/j.jma.2013.11.005 ↗
23. Extrusion temperature impacts on biometallic Mg-2.0Zn-0.5Zr-3.0Gd (wt%) solid-solution alloy10.1016/j.jallcom.2017.12.225 ↗
24. Strengthening effects of Zn addition on an ultrahigh ductility Mg-Gd-Zr magnesium alloy10.3390/ma11101942 ↗
25. New strategy to solve the ambient strength-ductility dilemma in precipitation-strengthened Mg-Gd alloys via Li addition10.1016/j.scriptamat.2022.114901 ↗
26. Microstructure and mechanical properties of Mg-Gd-Zr alloys with low gadolinium contents10.1007/s10853-011-5540-6 ↗
27. Tailoring good combinations among strength, ductility and damping capacity in a novel Mg-1.5Gd-1Zn damping alloy via hot extrusion10.1016/j.msea.2023.144827 ↗
28. Effect of manganese on microstructure and properties of Mg-2Gd magnesium alloy10.1016/j.msea.2019.138292 ↗
29. Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging10.1016/j.jallcom.2016.10.109 ↗
30. Microstructural characterization of intermetallic phases in a solution-treated Mg-5.0Sm-0.6Zn-0.5Zr (wt%) alloy10.1016/j.matchar.2018.08.059 ↗
31. Influence of Zn on the microstructure and mechanical properties of Mg-Gd-Zr alloy10.1016/j.msea.2022.143136 ↗
32. Mechanistic investigation on Ce addition in tuning recrystallization behavior and mechanical property of Mg alloy10.1016/j.jmst.2022.05.042 ↗
33. The role of atomic scale segregation in designing highly ductile magnesium alloys10.1016/j.actamat.2016.06.024 ↗
34. Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
35. Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy10.1016/j.actamat.2020.01.017 ↗
36. Large plasticity in magnesium mediated by pyramidal dislocations10.1126/science.aaw2843 ↗
37. Formation and slip pf pyramidal dislocations in hexagonal close-packed magnesium single crystals10.1016/j.actamat.2014.03.022 ↗
38. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
39. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
40. Grain refinement and improved tensile properties of Mg-3Al-1Zn alloy processed by low-temperature indirect extrusion10.1016/j.scriptamat.2013.12.005 ↗
41. On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys10.1016/j.actamat.2017.11.004 ↗
42. Three-dimensional atomic-scale imaging of impurity segregation to line defects10.1126/science.286.5448.2317 ↗
43. Ultrafine-grained Al-0.2Sc-0.1Zr alloy: the mechanistic contribution of nano-sized precipitates on grain refinement during the novel process of accumulative continuous extrusion10.1016/j.actamat.2015.08.043 ↗
44. Formation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloy10.1016/j.jallcom.2019.153477 ↗
45. Enhanced ductility of Mg-1Zn-0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning10.1016/j.msea.2021.141128 ↗
46. A rationale for the strong dependence of mechanical twinning on grain size10.1016/j.scriptamat.2008.05.027 ↗
47. Texture control by {10-12} twinning to improve the formability of Mg alloys: a review10.1016/j.jmst.2019.03.045 ↗
48. Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: combined in situ neutron diffraction and acoustic emission10.1016/j.actamat.2009.10.057 ↗
49. Anomalous effects of strain rate on the room-temperature ductility of a cast Mg-Gd-Y-Zr alloy10.1016/j.actamat.2018.08.013 ↗
50. Slip band-grain boundary interactions in commercial-purity titanium10.1016/j.actamat.2014.05.015 ↗
51. Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys10.1016/j.jallcom.2009.02.131 ↗
52. Solid solution strengthening behaviors in binary Mg-Y single phase alloys10.1016/j.jallcom.2008.04.049 ↗
53. Microstructure and strengthening mechanism of hot-extruded ultralight Mg-Li-Al-Sn alloys with high strength10.1016/j.jmst.2021.07.009 ↗
54. High plasticity mechanism of high strain rate rolled Mg-Ga alloy sheets10.1016/j.jmst.2021.05.064 ↗
55. Effects of Calcium on strength and microstructural evolution of extruded alloys based on Mg-3Al-1Zn-0.3Mn10.1007/s11661-019-05318-6 ↗
56. Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg-Zn-Yb-Zr extrusion alloys10.1016/j.msea.2021.142521 ↗
57. Quantitative prediction of texture effect on Hall-Petch slope for magnesium alloys10.1016/j.actamat.2019.05.016 ↗
58. Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy10.1016/j.scriptamat.2011.08.028 ↗
59. Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3%Cu10.1016/j.actamat.2018.07.006 ↗
60. Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases10.1016/j.jmst.2017.12.005 ↗
61. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
62. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite10.1016/j.compositesa.2012.03.007 ↗
63. Simultaneously improving yield strength and formability potential of Mg alloy via introducing nano precipitates and texture-weakened heterogeneous grains10.1016/j.jmrt.2023.04.171 ↗
64. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗