Revealing corrosion behavior of B4C/pure Al composite at different interfaces between B4C particles and Al matrix in NaCl electrolyte
Source abstract
Abstract
In the present work, the corrosion behavior of the B4C/pure Al composite in a Cl− containing environment is investigated. Thereby, the B4C/pure Al composites have been subjected to the different heat treatments to highlight the impact of the corrosion behavior at the different interfaces. The results of current sensing atomic force microscope (CSAFM) and scanning Kelvin probe microscopy (SKPFM) show that the dissolution of the Al matrix is relevant to the micro-galvanic corrosion between anodic Al matrix and cathodic B4C particles. The as quenched (AQ) composites with a higher volta potential difference (VPD) show inferior anticorrosion property than that of the as produced (AP) composites and the as annealed (AA) composites. By combining X-Ray diffraction (XRD) and geometric phase analysis (GPA), the higher residual stress and obvious interfacial strain between the B4C particles and the Al matrix of the AP samples is detected, which result in increasing the driving force of micro-galvanic corrosion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. A review on AA 6061 metal matrix composites produced by stir casting10.3390/ma14010175 ↗
2. Metal matrix composites reinforced by nano-particles—a review10.3390/met4010065 ↗
3. Effect of interfacial reaction on age-hardening ability of B4C/6061Al composites10.1016/j.msea.2014.10.025 ↗
4. Thermal decomposition, densification and mechanical properties of AlN–SiC(–TiB2) systems with and without B, B4C and C additives10.1016/j.jeurceramsoc.2007.11.012 ↗
5. The design, microstructure and mechanical properties of B4C/6061Al neutron absorber composites fabricated by SPS10.1016/j.matdes.2016.01.030 ↗
6. The design, microstructure and tensile properties of B4C particulate reinforced 6061Al neutron absorber composites10.1016/j.jallcom.2015.01.048 ↗
7. Effect of reaction on the tensile behavior of infiltrated boron carbide–aluminum composites10.1016/S0921-5093(02)00039-4 ↗
8. Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites10.1016/j.msea.2018.12.042 ↗
9. Improving the mechanical properties of carbon nanotubes reinforced aluminum matrix composites by heterogeneous structural design10.1016/j.coco.2021.101050 ↗
10. Phase transformation and mechanical properties of B4C/Al composites10.1016/j.jmrt.2019.12.042 ↗
11. The role of microstructure and microchemistry on intergranular corrosion of aluminium alloy AA7085-T745210.1016/j.corsci.2018.08.033 ↗
12. Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite10.1016/j.actamat.2019.11.068 ↗
13. Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites10.1016/j.msea.2016.08.062 ↗
14. Investigation of mechanical and corrosion properties of an Al-Zn-Mg-Cu alloy under various ageing conditions and interface analysis of η′ precipitate10.1016/j.matdes.2015.06.183 ↗
15. Localized corrosion in AA2099-T83 aluminum-lithium alloy: the role of intermetallic particles10.1016/j.matchemphys.2015.05.037 ↗
16. A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy10.1016/j.jmst.2018.05.006 ↗
17. Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopy10.1016/j.electacta.2006.03.027 ↗
18. Corrosion mechanism associated with Mg2Si and Si particles in Al-Mg-Si alloys10.1016/S1003-6326(11)61092-3 ↗
19. Corrosion of AA2024-T3 Part I: localised corrosion of isolated IM particles10.1016/j.corsci.2010.09.009 ↗
20. Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium–magnesium alloys10.1016/j.corsci.2012.12.022 ↗
21. Local potential measurements with the SKPFM on aluminium alloys10.1016/j.electacta.2004.01.045 ↗
22. Review of micro-scale and atomic-scale corrosion mechanisms of second phases in aluminum alloys10.1016/S1003-6326(21)65727-8 ↗
23. Simulating the galvanic coupling between S-Al2CuMg phase particles and the matrix of 2024 aerospace aluminium alloy10.1016/j.corsci.2012.07.020 ↗
24. Size-dependent role of S phase in pitting initiation of 2024Al alloy10.1016/j.corsci.2016.01.016 ↗
25. Corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites reinforced with B4C particles in 0.05M NaCl solution10.1016/j.wear.2013.06.026 ↗
26. Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution10.1016/j.corsci.2008.11.001 ↗
27. Microstructural and corrosion behavior of Al/SiC metal matrix composites10.1016/j.asej.2014.03.003 ↗
28. Al-5Cu/B4Cp composites: the combined effect of artificially aging (T6) and particle volume fractions on the corrosion behaviour10.1016/j.apt.2020.05.006 ↗
29. Corrosion onset associated with the reinforcement and secondary phases in B4C-6061Al neutron absorber material in H3BO3 solution10.1016/j.corsci.2019.03.042 ↗
30. Strengthening and toughening B4C/Al composites via optimizing the Al2O3 distribution during hot rolling10.1016/j.jallcom.2022.163773 ↗
31. Evaluation of pitting corrosion in duplex stainless steel Fe20Cr9Ni for nuclear power application10.1016/j.actamat.2020.07.046 ↗
32. Role of Al2O3 inclusions on the localized corrosion of Q460NH weathering steel in marine environment10.1016/j.corsci.2018.04.007 ↗
33. Microelectrodes for corrosion studies in microsystems10.1016/S0013-4686(01)00551-5 ↗
34. Accelerated corrosion tests of Al-B4C neutron absorber used in spent nuclear fuel pool10.1016/j.jnucmat.2021.153011 ↗
35. Corrosion inhibition of Al-B4C metal matrix composites in a NaCl solution by benzotriazole10.1016/j.matchemphys.2013.01.021 ↗
36. Electrochemical examinations on the corrosion behavior of boron carbide reinforced aluminum-matrix composites10.1149/1.3567519 ↗
37. Quantitative measurement of displacement and strain fields from HREM micrographs10.1016/S0304-3991(98)00035-7 ↗
38. R. Wang, D.T. Wang, H. Nagaumi, M.H. Zhang, X.Z. Li, Z.B. Wu, X.Z. Zhang, P.F. Zhou, B. Zhang, The novel strategy for enhancing mechanical properties and corrosion resistance via regulating multi-scale microstructure characteristics in Al-Si-Cu-Mg-Zr cast alloy, J Mater Sci Technol, published online. ..
39. High-resolution Kelvin probe microscopy in corrosion science: scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP)10.1016/j.electacta.2007.03.016 ↗
40. In situ detection of differences in the electrochemical activity of Al2Cu IMPs and investigation of their effect on FFC by scanning Kelvin probe force microscopy10.1016/j.corsci.2012.02.006 ↗
41. Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution10.1007/s10008-020-04890-x ↗
42. An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance10.1016/j.jmst.2020.06.036 ↗
43. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
44. Revealing the dimensional stability mechanisms of SiC/Al composite under long-term thermal cycling10.1016/j.ceramint.2022.01.277 ↗
45. Analytical modeling of uniaxial strain effects on the performance of double-gate graphene nanoribbon field-effect transistors10.1186/1556-276X-9-65 ↗
46. Electrochemical behavior of boron carbide and galvanic corrosion of boron carbide reinforced 6092 aluminum composites10.1149/1.2215494 ↗
47. Relation between microstructural aspects of AA2024 and its corrosion behavior investigated using AFM scanning potential technique10.1016/S0010-938X(00)00002-0 ↗
48. Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp)10.1016/j.corsci.2004.08.010 ↗
49. Mechanical properties and corrosion behavior of artificially aged Al-Mg-Si alloy10.1016/j.jmrt.2019.11.040 ↗
50. The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium10.1016/j.corsci.2018.11.035 ↗
51. Insights into the electrochemical response of a partially recrystallized Al-Mg-Si alloy and its relationship to corrosion events10.1016/j.electacta.2019.03.220 ↗
52. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
53. Grain boundary segregation of alloying Cu induced intergranular corrosion of B4C-6061Al composite10.1016/j.matchar.2021.110930 ↗
54. Influence of grain structure on quench sensitivity relative to localized corrosion of high strength aluminum alloy10.1016/j.matchemphys.2015.10.051 ↗
55. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy10.1016/j.corsci.2020.109174 ↗
56. Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels10.1016/j.corsci.2020.109150 ↗
57. In-situ nanoscopic observations of dealloying-driven local corrosion from surface initiation to in-depth propagation10.1016/j.corsci.2020.108912 ↗
58. Dealloying-driven local corrosion by intermetallic constituent particles and dispersoids in aerospace aluminium alloys10.1016/j.corsci.2020.108947 ↗
59. Effects of SiC particle size on CTEs of SiCp/Al composites by pulsed electric current sintering10.1016/j.matchemphys.2005.10.019 ↗
60. Development of Al-5Cu/B4C composites with low coefficient of thermal expansion for automotive application10.1016/j.msea.2017.01.075 ↗
61. A highly distorted ultraelastic chemically complex Elinvar alloy10.1038/s41586-021-04309-1 ↗
62. Revealing the mechanism of internal stress on dimensional stability in SiC/Al composites under long-term thermal exposure10.1016/j.vacuum.2022.111786 ↗
63. Relations between sample preparation and SKPFM Volta potential maps on an EN AW-6005 aluminium alloy10.1016/j.corsci.2004.07.029 ↗
64. Volta potential mapping of the gradient strengthened layer in 20CrMnTi by using SKPFM10.1007/s10853-020-04815-z ↗
65. Effects of dislocation on electron work function of metal surface10.1179/026708302225005918 ↗
66. Strain-induced preferential dissolution at the dislocation emergences in MnS: an atomic scale study10.1080/14786435.2015.1052030 ↗
67. Hirth · 1983
68. Interfacial characterization and its influence on the corrosion behavior of Mg-SiO2 nanocomposites10.1016/j.actamat.2022.117840 ↗
69. Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment10.1016/j.jmst.2018.09.060 ↗
70. The effect of rare earths additions on the microstructure and the corrosion behavior of Sn-0.7Cu-0.075 Al solder alloy10.3390/ma12223731 ↗