journal article·2024-01Open access

Enhancement of SAC105 solder for vacuum soldering with Cu substrates through incorporation of activated Ti nanoparticles

ChuanJiang Wu, Liang Zhang, Chen Chen, Xiao Lu

Abstract

This study incorporated activated Ti nanoparticles (Ti NPs) into Sn1·0Ag0·5Cu (SAC105) solder for vacuum soldering with Cu substrates. The wettability, microstructure, interfacial, and mechanical properties of SAC105-xTi (x = 0.1, 0.2, 0.3, 0.4, 0.5 wt%) composite solder were systematically investigated. The results showed that adding Ti NPs improved the wettability of SAC105 solder, in which the wetting angle of SAC105-0.3Ti solder was 19.51°. Additionally, Ti NPs helped to refine the microstructure and inhibited the growth of interfacial intermetallic compounds (IMC). The shear strength of SAC105/Cu joints increased and then decreased with increasing Ti NPs content, and the optimum shear strength was obtained for SAC105-0.3Ti/Cu joints at 27.98 MPa. The strength of the solder matrix and the IMC layer was altered by adding Ti NPs, resulting in a modification of the fracture path of the joint, bringing it closer to the IMC layer. Excessive addition of Ti NPs could lead to their agglomeration within the joints and result in damage to the mechanical properties of the joints. Furthermore, adding Ti NPs increased the microhardness of SAC105 solder.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Characterising solder materials from random vibration response of their interconnects in BGA packaging10.1007/s11664-023-10394-x ↗
2. Impact of isothermal aging on mechanical properties of 92.8%Sn-3%Ag-0.5%Cu-3.3%Bi (cyclomax) solder joints10.3390/met13030591 ↗
3. Influences of mono-Ni(P) and dual-Cu/Ni(P) plating on the interfacial microstructure evolution of solder joints10.1007/s11661-018-4983-7 ↗
4. Effects of Ag content on the interfacial reactions between liquid Sn-Ag-Cu solders and Cu substrates during soldering10.1016/j.jallcom.2016.03.177 ↗
5. Effects of Ag addition on solid-state interfacial reactions between Sn-Ag-Cu solder and Cu substrate10.1016/j.matchar.2017.01.004 ↗
6. Transient liquid phase bonding (TLPB) of Cu to Cu using Sn interconnect solder reinforced by submicron Al particles10.1016/j.jmatprotec.2022.117686 ↗
7. Novel optical composite material for efficient vanadium(III) capturing from wastewater10.1016/j.molliq.2019.03.119 ↗
8. Improving cesium removal to clean-up the contaminated water using modified conjugate material10.1016/j.jece.2020.103684 ↗
9. Interfacial reaction and properties of Sn0.3Ag0.7Cu containing nano-TiN solder joints10.1007/s10854-021-07532-8 ↗
10. Effect of thermal cycles on interface and mechanical property of low-Ag Sn1
11. Effect of γ-Fe2O3 nanoparticles size on the properties of Sn-1.0Ag–0.5Cu nano-composite solders and joints10.1016/j.jallcom.2015.11.213 ↗
12. Structural characterization and creep resistance of nano-silicon carbide reinforced Sn–1.0Ag–0.5Cu lead-free solder alloy10.1016/j.matdes.2013.10.043 ↗
13. Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish10.1016/j.jmrt.2021.09.067 ↗
14. ZrO2 nanoparticle embedded low silver lead free solder
15. Influence of SnO2 nanoparticles addition on microstructure, thermal analysis, and interfacial IMC growth of Sn1.0Ag0.7Cu solder10.1007/s11664-017-5374-3 ↗
16. Reliability enhancement of Sn-1.0Ag-0.5Cu nano-composite solders by adding multiple sizes of TiO2 nanoparticles10.1016/j.jallcom.2016.12.037 ↗
17. Activation energy for Cu-Sn intermetallic in CNT-reinforced Sn-1
18. Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints
19. Intermetallic formation induced substrate dissolution in electroless Ni(P)-solder interconnections10.1557/jmr.2008.0318 ↗
20. Effects of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder10.1016/j.msea.2012.08.031 ↗
21. Alloying modification of Sn–Ag–Cu solders by manganese and titanium10.1016/j.microrel.2008.10.001 ↗
22. Effect of Ti content on the metallization layer and copper/alumina brazed joint10.1016/j.ceramint.2017.07.016 ↗
23. Reactive wetting and interfacial characterization of ZrO2 by SnAgCu-Ti alloy10.1016/j.ceramint.2018.12.163 ↗
24. Effect of Ti addition on the wetting and brazing of Sn0.3Ag0.7Cu filler on SiC ceramic10.1111/jace.16245 ↗
25. Reactive wetting of amorphous silica by Sn0.3Ag0.7Cu-xTi (x = 1 and 3 wt.%) alloys at 800–900 °C10.1016/j.ceramint.2019.03.218 ↗
26. Vacuum brazing of GH99 superalloy using graphene reinforced BNi-2 composite filler10.1016/j.jmst.2018.02.008 ↗
27. Brazing of SiO2 ceramic10.1007/s00170-021-06685-4 ↗
28. Improving the brazing of SiC ceramic by nano-Si3N4 reinforced BNi-2 composite filler prepared by high-shear processing10.1016/j.matlet.2022.133452 ↗
29. Materials modification of the lead-free solders incorporated with micro/nano-sized particles: a review10.1016/j.matdes.2020.109224 ↗
30. Wettability and rheological behavior of low Ag lead-free SAC/graphene and cobalt-graphene nanocomposite solder paste10.1007/s11661-022-06707-0 ↗
31. Microstructure evolution and thermal, wetting, mechanical properties of SiC nanowires reinforced SAC105 composite solder10.1016/j.intermet.2022.107816 ↗
32. Effect of Ti on the interfacial reaction between Sn and Cu10.1007/s10854-011-0426-6 ↗
33. Effects of Ti addition to Sn-Ag and Sn-Cu solders10.1016/j.jallcom.2012.01.032 ↗
34. Microstructure and orientation evolution of β-Sn and interfacial Cu6Sn5 IMC grains in SAC105 solder joints modified by Si3N4 nanowires10.1016/j.jmrt.2023.08.186 ↗
35. Brazing copper and alumina metallized with Ti-containing Sn0.3Ag0.7Cu metal powder10.1016/j.matdes.2015.08.081 ↗
36. Growth orientation of Cu-Sn IMC in Cu/Sn-3.5Ag/Cu-xZn microbumps and Zn-doped solder joints10.1016/j.matlet.2014.07.061 ↗
37. Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish10.1016/j.jmrt.2021.09.067 ↗
38. Modification of Sn-1.0Ag-0.5Cu solder using nickel and boron10.1007/s12598-014-0221-7 ↗
39. Improvements in the properties of low-Ag SAC105 solder alloys with the addition of tellurium10.1007/s10854-023-10704-3 ↗
40. To the theory of Ostwald ripening in metallic alloys10.1134/S0031918X16080044 ↗
41. Physical review. B C.m
42. A study on interfacial phase evolution during Cu/Sn/Cu soldering with a micro interconnected height10.1016/j.matchar.2017.06.033 ↗
43. Shear strength and fracture behavior of reflowed Sn3.0Ag0.5Cu/Cu solder joints under various strain rates10.1016/j.jallcom.2016.08.168 ↗
44. Interfacial reaction, shear behavior and microhardness of Cu-Sn TLP bonding joints bearing CuZnAl powder for 3D packaging10.1016/j.jmapro.2021.06.073 ↗
45. Interfacial structures and mechanical properties of Cu/Sn/Cu containing SiC nanowires under transient liquid phase bonding10.1016/j.intermet.2022.107641 ↗
46. Mechanical properties and microstructure evolution of Cu/Sn58Bi/Cu solder joint reinforced by B4C nanoparticles10.1016/j.jmrt.2023.01.077 ↗
47. Study on the dual inhibition behavior of interfacial IMCs in Cu/SAC105/Cu joint by adopting SiC nanowires and nanocrystalline Cu substrate10.1016/j.jmrt.2023.06.174 ↗
48. Effects of nano-Al2O3 additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder10.1016/j.matdes.2010.04.033 ↗
49. Influence of lanthanum additions on the microstructure and microhardness of Sn-3.5Ag solder10.1007/s11664-009-0863-7 ↗
50. Effect of addition of TiO2 nanoparticles on the microstructure, microhardness and interfacial reactions of Sn3.5AgXCu solder10.1016/j.matdes.2011.06.044 ↗
51. Effects of TiO2 nanoparticles addition on microstructure, microhardness and tensile properties of Sn-3.0Ag-0.5Cu-xTiO2 composite solder10.1016/j.matdes.2013.10.033 ↗
52. Evolution of Ag3Sn compounds and microhardness of Sn3.5Ag0.5Cu nano-composite solders during different cooling rate and aging10.1016/j.matdes.2012.03.021 ↗
53. Effects of Mn nanoparticle addition on wettability, microstructure and microhardness of low-Ag Sn-0.3Ag-0.7Cu-xMn(np) composite solders10.1108/SSMT-10-2017-0027 ↗
54. Effects of nano-structured particles on microstructure and microhardness of Sn-Ag solder alloy10.1007/s10854-009-9981-5 ↗