journal article·2024-01Open access

Improving corrosion and wear resistances of 2195 Al–Li alloy by PEO and LDHs composite coating

Yongxiao Wang, Yaokun Pan, Xiao Xu, Wendong Zhang, Rui Feng, Hui Li, Zengli Gao

Abstract

In this study, a composite coating comprising a ceramic film and layered double hydroxide (LDHs) layer was prepared on the surface of extruded 2195 Al–Li alloy. The preparation method, surface morphology, and chemical composition of the coating were described and characterized in detail. The corrosion and wear protection of the coating on the Al–Li alloy substrate were tested, and the mechanisms of corrosion and wear resistance were discussed. The results indicate that plasma electrolytic oxidation processing can form a thick ceramic film with good interface bonding on the surface of 2195 Al–Li alloy. Hydrothermal reaction in an alkaline solution produces a nanoscale layer of Mg/Al LDHs on the surface of the ceramic film. The LDHs layer fills the micro-pores and cracks in the film and effectively prevents the corrosion medium from permeating and damaging the alloy matrix. The composite coating reduces the surface corrosion efficiency by 99.98 %. Moreover, the composite-coated samples exhibit long-lasting corrosion resistance in seawater and exfoliation corrosion environments. Additionally, the composite-coated Al–Li alloy exhibits wear resistance 1-2 orders of magnitude higher than that of the bare alloy at both room and high temperatures. This study proposes a novel strategy for corrosion and wear protection of Al–Li alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: a review10.1016/j.jare.2017.12.004 ↗
2. Hot deformation behavior and microstructure evolution of the spray deposited and secondary hot extruded 2195 Al-Li alloy10.1016/j.jmrt.2022.08.055 ↗
3. Prasad · 2013
4. Corrosion and aging of organic aviation coatings: a review10.1016/j.cja.2023.04.016 ↗
5. Aircraft corrosion-Review of corrosion processes and its effects in selected cases10.2478/fas-2018-0001 ↗
6. Correlation of intergranular corrosion behaviour with microstructure in Al-Cu-Li alloy10.1016/j.corsci.2018.05.011 ↗
7. The influence of Zn addition on microstructure of an Al-1.7 Cu-4.0 Li-0.4 Mg alloy10.1016/j.jmrt.2019.12.074 ↗
8. Grain-interior corrosion and tensile performance degradation of 2XXX Al–Li alloy in an actual marine environment10.1016/j.jmrt.2023.08.144 ↗
9. On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behavior10.1016/j.corsci.2017.12.001 ↗
10. Corrosion behavior of anodized Al-Cu-Li alloy: the role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
11. Role of constituent intermetallic phases and precipitates in initiation and propagation of intergranular corrosion of an Al-Li-Cu-Mg alloy10.1016/j.corsci.2022.110294 ↗
12. Effect of the aging process and pre-deformation on the precipitated phase and mechanical properties of 2195 Al-Li alloy
13. Effects of heat treatment and pre-stretching on the mechanical properties and microstructure evolution of extruded 2050 Al-Cu-Li alloy10.1016/j.msea.2022.143236 ↗
14. Microstructure characteristics of an ultra-high strength extruded Al-4.7Cu-1Li-0.5Mg-0.1Zr-1Zn alloy during heat treatment10.1016/j.jallcom.2019.152216 ↗
15. The effects of retrogression and reaging on aluminum alloy 2099 (C458)10.1007/s11665-010-9737-7 ↗
16. The effects of retrogression and reaging on aluminum alloy 219510.1007/s11665-010-9739-5 ↗
17. Improved corrosion resistance of 2195 Al-Cu-Li alloy through T6I6 interrupted aging10.1016/j.jallcom.2023.170055 ↗
18. Effect of MAO coatings on cavitation erosion and tribological properties of 5056 and 7075 aluminum alloys
19. Energy consumption, wear and corrosion of PEO coatings on preanodized Al alloy: the influence of current and frequency10.1016/j.jmrt.2022.10.049 ↗
20. Plasma electrolytic oxidation coatings with particle additions-A review10.1016/j.surfcoat.2016.08.055 ↗
21. Simple and scalable synthesis of super-repellent multilayer nanocomposite coating on Mg alloy with mechanochemical robustness, high-temperature endurance and electric protection10.1016/j.jma.2020.11.024 ↗
22. Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy10.1016/j.corsci.2010.04.022 ↗
23. Microstructure and corrosion resistance of modified 2024 Al alloy using surface mechanical attrition treatment combined with microarc oxidation process10.1016/j.corsci.2010.09.061 ↗
24. A controllable fabrication of flat absorber dual-layer coating with electric shielding on 6061 aluminum alloy by PEO with nanoparticles additive10.1016/j.surfcoat.2023.129382 ↗
25. Effect of different electrolytes in micro-arc oxidation on corrosion and tribological performance of 7075 aluminum alloy10.1088/2053-1591/ab1da5 ↗
26. Enhanced corrosion and tribocorrosion behavior of plasma electrolytic oxidized coatings on 5052 aluminum alloy with addition of pullulan to silicate electrolyte10.1016/j.jallcom.2023.170782 ↗
27. Effects of copper additive on micro-arc oxidation coating of LZ91 magnesium-lithium alloy10.1016/j.surfcoat.2016.10.008 ↗
28. Effect of NaOH concentration on microstructure and corrosion resistance of MAO coating on cast Al-Li alloy10.1016/S1003-6326(21)65549-8 ↗
29. Effect of post-sealing treatment with different concentrations of NaH2PO4 on corrosion resistance of MAO coating on 6063 aluminum alloy10.1016/j.surfcoat.2022.128604 ↗
30. A systematic study of the role of cathodic polarization and new findings on the soft sparking phenomenon from plasma electrolytic oxidation of an Al-Cu-Li alloy10.1149/1945-7111/ac82cc ↗
31. Key factors determining the development of two morphologies of plasma electrolytic coatings on an Al-Cu-Li alloy in aluminate electrolytes10.1016/j.surfcoat.2016.02.054 ↗
32. Plasma electrolytic oxidation of an Al-Cu-Li alloy in alkaline aluminate electrolytes: a competition between growth and dissolution for the initial ultra-thin films10.1016/j.electacta.2014.06.122 ↗
33. The effects of carbon-based additives on corrosion and wear properties of plasma electrolytic oxidation (PEO) coatings applied on aluminum and its alloys: a review
34. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: a review10.1016/j.jma.2020.05.001 ↗
35. Effect of carbon nanotubes additive on tribocorrosion performance of micro-arc oxidized coatings on Ti6Al4V alloy
36. Corrosion and tribocorrosion protection of AZ31B Mg alloy by a hydrothermally treated PEO/chitosan composite coating10.1016/j.porgcoat.2022.107002 ↗
37. Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy10.1016/j.jma.2021.04.004 ↗
38. Enhancing the self-healing property by adding the synergetic corrosion inhibitors of Na3PO4 and 2-mercaptobenzothiazole into the coating of Mg alloy10.1016/j.electacta.2019.134796 ↗
39. Comparison of the corrosion behavior of AM60 Mg alloy with and without self-healing coating in atmospheric environment10.1016/j.jma.2020.05.018 ↗
40. A review on the research progress of LDHs as corrosion inhibitors for reinforced concrete
41. Sealing of tartaric sulfuric (TSA) anodized AA2024 with nanostructured LDH layers10.1039/C5RA27286F ↗
42. Healing effects of LDHs nanoplatelets on MAO ceramic layer of aluminum alloy10.1016/j.jallcom.2017.04.016 ↗
43. Corrosion protection properties of different inhibitors containing PEO/LDHs composite coating on magnesium alloy AZ3110.1038/s41598-021-81029-6 ↗
44. Active corrosion protection of phosphate loaded PEO/LDHs composite coatings: SIET study10.1016/j.jma.2021.03.008 ↗
45. In-situ LDHs growth on PEO coatings on AZ31 magnesium alloy for active protection: roles of PEO composition and conversion solution
46. Effect of extrusion parameters on microstructure, texture and mechanical property anisotropy of spray deposited 2195 Al-Li alloy profile10.1016/j.msea.2021.141406 ↗
47. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization10.1016/j.jmst.2020.12.028 ↗
48. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al-Cu-Li alloy 219510.1016/j.jmrt.2019.06.052 ↗
49. Effects of creep aging upon Al-Cu-Li alloy: strength, toughness and microstructure10.1016/j.jallcom.2018.06.103 ↗
50. Characterization of localized corrosion pathways in 2195-T8 Al-Li alloys exposed to acidic solution10.1016/j.dt.2022.05.004 ↗
51. Effects of pre-stretching and aging treatments on microstructure, mechanical properties, and corrosion behavior of spray-formed Al-Li alloy 219510.1007/s11665-020-05142-9 ↗
52. Effect of alloy cations on corrosion resistance of LDH/MAO coating on magnesium alloy10.1016/j.apsusc.2018.08.242 ↗
53. Influence of reaction temperature on the controlled growth of Mg-Al LDH film10.20964/2017.07.74 ↗
54. Evidence of Si-OH species at the surface of aged silica10.1116/1.577726 ↗
55. Characterization of an activated alumina claus catalyst by XPS10.1116/1.1247775 ↗
56. Gamma-alumina (γ-Al2O3) by XPS10.1116/1.1247774 ↗
57. Characterization of AlN thin films fabricated by reactive DC sputtering: experimental measurements and Hückel calculations10.1142/S0217979209049577 ↗
58. Room temperature plasma-etching and surface passivation of far-ultraviolet Al mirrors using electron beam generated plasmas10.1364/OME.417475 ↗
59. Naumkin · 2012
60. Enhanced corrosion resistance of LiAl-layered double hydroxide (LDH) coating modified with a Schiff base salt on aluminum alloy by one step in-situ synthesis at low temperature10.1016/j.apsusc.2018.09.034 ↗
61. Alkylperfluorosilane self-assembled monolayers on aluminum: a comparison with alkylphosphonate self-assembled monolayers10.1021/jp066101m ↗
62. The production of a corrosion resistant graphene reinforced composite coating on copper by electrophoretic deposition10.1016/j.carbon.2013.04.063 ↗
63. Effect of process parameters on corrosion resistance of anodizing film on 2195 Al-Li alloy
64. Improvement of corrosion resistance of PEO coatings on Al alloy by formation of ZnAl layered double hydroxide10.1016/j.surfcoat.2022.128528 ↗
65. Mechanical properties, corrosion and microstructure distribution of a 2195-T8 Al-Li alloy TIG welded joint10.1016/j.jmapro.2023.02.007 ↗
66. Effects of aging treatment on the mechanical properties and corrosion resistance of an Al-Cu-Mg-Li alloy
67. Effect of surface abrasion on pitting corrosion of Al-Li alloy10.1016/j.corsci.2018.04.010 ↗
68. Facile etching fabrication of superhydrophobic 7055 aluminum alloy surface towards chloride environment anticorrosion10.1016/j.corsci.2021.109262 ↗
69. Simulation study on function mechanism of some precipitates in localized corrosion of Al alloys10.1016/j.corsci.2006.12.002 ↗
70. Study on the microstructure and wear behavior of Mg-containing Al-12Sn-4Si alloys10.1016/j.jmrt.2022.02.087 ↗