Formation and effect of intermetallic compounds in the interface of copper/aluminum composites under rolling conditions
Source abstract
Abstract
Rolling and annealing are common composite processes of Copper/Aluminum composites (Cu/Al), but the formation of intermetallic compounds (IMCs) at Cu/Al interfaces and their relationship with processing conditions still lack a nanoscale understanding. Here, we use molecular dynamics (MD) method to simulate the formation of IMCs at Cu/Al interface under different rolling and annealing process parameters with their formation mechanisms quantitatively analyzed. XRD, RDF and potential energy analysis show that rolling promotes the formation of interfacial IMCs, because copper and aluminum atoms tend to diffuse into each other at the interface and combine to form IMCs during rolling. The effects of different size ratios of copper to aluminum and annealing on IMCs are also evaluated. By studying the equivalent phonon thermal conductivity of the interfacial layer and shear strength, it is shown that IMCs enhances interfacial phonon heat transfer, but reduce the interfacial shear strength due to their brittle and hard properties. In addition, the rolling and annealing processes are able to change the dislocation density, thereby affecting the phonon scattering and shear strength of Cu/Al. These results are expected to guide improved directions for the process optimization of high-performance Cu/Al.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. A fundamental review on composite materials and some of their applications in biomedical engineering10.1016/j.jksues.2020.07.007 ↗
2. Polymer composite materials: a comprehensive review10.1016/j.compstruct.2021.113640 ↗
3. Metal-organic framework (MOF) composites as promising materials for energy storage applications10.1016/j.cis.2022.102732 ↗
4. - preparation/processing of polymer-graphene composites by different techniques, Polymer nanocomposites containing graphene
5. Recent progress in metal-based composites toward adsorptive removal of phosphate: mechanisms, behaviors, and prospects
6. Deformation behavior and crack propagation on interface of Al/Cu laminated composites in uniaxial tensile test10.1007/s12598-018-0998-x ↗
7. Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer10.1016/j.matdes.2011.12.045 ↗
8. Study on microstructure and properties of ultra-thin Cu/Al composite sheets using the cold-rolled composite method at the microscale10.3390/met13040780 ↗
9. Effect of heat treatment on bonding mechanism and mechanical properties of high strength Cu/Al/Cu clad composite10.1016/j.jallcom.2019.06.132 ↗
10. Cu-Al composite as the negative electrode for long-life Al-ion batteries10.1149/2.0131915jes ↗
11. Interfacial bonding mechanism and annealing effect on Cu-Al joint produced by solid-liquid compound casting10.1016/j.jmatprotec.2017.10.050 ↗
12. Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu–Al bilayer compounds
13. The interfacial characterization and performance of Cu/Al-conductive heads processed by explosion welding, cold pressure welding, and solid-liquid casting10.3390/met9020237 ↗
14. Analysis of quality of bimetallic rod after extrusion process10.1016/j.jmatprotec.2006.04.107 ↗
15. Multilayer Cu/Al/Cu explosive welded joints: characterizing heat treatment effect on the interface microstructure and mechanical properties10.1016/j.jmapro.2018.09.014 ↗
16. Evolution of bonding interface in solid–liquid cast-rolling bonding of Cu/Al clad strip10.1016/S1003-6326(17)60119-5 ↗
17. Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling10.1016/j.compositesb.2011.04.045 ↗
18. Mechanochemical joining in cold roll-cladding of tri-layered Cu/Al/Cu composite and the interface cracking behavior10.1016/j.matdes.2014.01.054 ↗
19. Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process10.1016/j.matdes.2010.04.022 ↗
20. Effect of heat treatment on the bending behavior of tri-layered Cu/Al/Cu composite plates10.1016/j.matdes.2012.12.070 ↗
21. A comparison between cold-welded and diffusion-bonded Al/Cu bimetallic rods produced by ECAE process10.1007/s11665-013-0591-2 ↗
22. Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires10.1016/j.msea.2011.05.077 ↗
23. Mechanical and asymmetrical thermal properties of Al/Cu composite fabricated by repeated hydrostatic extrusion process10.1007/s12540-015-4242-z ↗
24. PCTS‐Controlled synthesis of L10/L12‐typed Pt‐Mn intermetallics for electrocatalytic oxygen reduction
25. General strategy for synthesis of ordered Pt3M intermetallics with ultrasmall particle size10.1002/anie.201916260 ↗
26. Purification of the Al2Cu intermetallic compound via zone melting crystallization technique10.1016/j.jmrt.2023.07.199 ↗
27. Influence of reduction ratio on the interface microstructure and mechanical properties of roll-bonded Al/Cu sheets10.1016/j.msea.2013.06.077 ↗
28. Interface strengthening of a roll-bonded two-ply Al/Cu sheet by short annealing10.1016/j.matchar.2021.111021 ↗
29. Influence of interfacial structure development on the fracture mechanism and bond strength of aluminum/copper bimetal plate
30. Molecular dynamics simulation of structural transformations in Cu-Al system under pressure10.1088/1742-6596/1435/1/012065 ↗
31. Molecular dynamics simulations of atomic diffusion during the Al–Cu ultrasonic welding process10.3390/ma12142306 ↗
32. Preparation and properties of halloysite nanotubes/poly(ethylene methyl acrylate)-based nanocomposites by variation of mixing methods10.1080/03602559.2017.1370106 ↗
33. Surface quaternized nanosensor as a one-arrow-two-hawks approach for fluorescence turn “on–off–on” bifunctional sensing and antibacterial activity10.1039/C8NJ06308G ↗
34. A comparison on self-seeding and isothermal crystallization of polyethylene in solution using small angle neutron scattering10.1016/j.polymer.2015.02.008 ↗
35. Molecular dynamics simulations of the effects of annealing on the micro residual stress induced by vacancy defects in aluminum crystal10.1016/j.jcrysgro.2020.125754 ↗
36. On the mechanical response and intermetallic compound formation in Al/Fe interface: molecular dynamics analyses10.1080/14786435.2020.1804083 ↗
37. AlCoCrCuFeNi high entropy alloy cluster growth and annealing on silicon: a classical molecular dynamics simulation study10.1016/j.apsusc.2013.08.133 ↗
38. On the evolution of nano-structures at the Al–Cu interface and the influence of annealing temperature on the interfacial strength10.3390/nano12203658 ↗
39. Effect of annealing process on interface microstructure and mechanical property of the Cu/Al corrugated clad sheet10.1016/j.jmrt.2022.12.188 ↗
40. Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys10.1103/PhysRevB.54.8398 ↗
41. Numerical study and experimental validation of deformation of <111> FCC CuAl single crystal obtained by additive manufacturing10.3390/met11040582 ↗
42. Atomistic mechanism underlying nucleation in Al–Cu alloys with different compositions and cooling rates10.1021/acs.jpcc.0c07483 ↗
43. Surface dislocation nucleation mediated deformation and ultrahigh strength in sub-10-nm gold nanowires10.1007/s12274-011-0177-y ↗
44. Fracture of sub-20nm ultrathin gold nanowires10.1002/adfm.201101224 ↗
45. Structure evolution during deposition and thermal annealing of amorphous carbon ultrathin films investigated by molecular dynamics simulations
46. Effect of atomic diffusion on interfacial heat transfer and tensile property of copper/aluminum composites
47. In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon10.1016/j.apsusc.2019.05.068 ↗
48. A computational algorithm to produce virtual X-ray and electron diffraction patterns from atomistic simulations10.1007/s11837-013-0829-3 ↗
49. Molecular dynamics modeling of diffusion bonding10.1016/j.scriptamat.2005.02.004 ↗
50. Molecular dynamics simulations of nanometric metallic multilayers: reactivity of the Ni-Al system10.1103/PhysRevB.84.024113 ↗
51. A simple nonequilibrium molecular dynamics method for calculating the thermal conductivity10.1063/1.473271 ↗
52. Nonequilibrium molecular dynamics10.1016/0375-9474(92)90490-B ↗
53. AlN/diamond interface nanoengineering for reducing thermal boundary resistance by molecular dynamics simulations10.1016/j.apsusc.2023.156419 ↗
54. Strengthening the Ti/TiN interface against shear failure with Al dopants: a molecular dynamics study10.1016/j.apsusc.2022.156024 ↗
55. Effect of annealing on the interface and mechanical properties of Cu-Al-Cu laminated composite prepared with cold rolling10.3390/ma13020369 ↗
56. High-performance Cu/Al laminated composites fabricated by horizontal twin-roll casting10.1002/mawe.201700217 ↗
57. Phonon–dislocation interaction and its impact on thermal conductivity10.1063/5.0054078 ↗
58. Strong phonon localization in PbTe with dislocations and large deviation to Matthiessen's rule10.1038/s41524-019-0232-x ↗
59. Strain rate dependency of dislocation plasticity
60. Dynamic mechanisms of strengthening and softening of coherent twin boundary via dislocation pile-up and cross-slip10.1080/21663831.2022.2065892 ↗