Residual stress, fatigue behavior, and mechanical properties of equal-channel angular pressed commercial pure titanium
Source abstract
Abstract
Residual stresses, fatigue behavior, and mechanical properties of equal channel angular pressing (ECAP) commercial pure titanium (CP–Ti) are investigated in this study. Residual stresses can significantly affect the performance and reliability of CP-Ti components under cyclic loading conditions. The study focuses on understanding the relationship between ECAP processing, residual stresses, and fatigue behavior in CP-Ti. The ECAP process was employed to produce CP-Ti grade 2 samples, and their fatigue behavior was characterized. The results revealed a significant increment in residual stresses, fatigue strength, microhardness, and tensile strength by ECAP processing on the CP-Ti. The measured fatigue limit of the processed CP-Ti was found to be higher than that of coarse-grained CP-Ti and approaches the fatigue limit of the Ti–6Al–4V alloy. Residual stresses resulting from non-conventional machining processes and surface treatments are known to affect the fatigue life of titanium alloys. Compressive residual stresses have been shown to inhibit the growth rate of fatigue cracks and improve fatigue life. Understanding the effect of residual stresses on the fatigue behavior and mechanical properties of ECAP-processed CP-Ti is crucial to optimizing the design and ensuring the long-term durability of CP-Ti components in engineering applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Properties and performance of ultrafine grained titanium for biomedical applications10.1590/1516-1439.005615 ↗
2. Ultrafine grained titanium for biomedical applications : an overview of performance
3. Fatigue life of titanium alloys fabricated by additive layer manufacturing techniques for dental implants10.1007/s11661-012-1470-4 ↗
4. Mechanical properties and residual stress measurements of grade IV titanium and Ti-6Al-4V and Ti-13Nb-13Zr titanium alloys after laser treatment10.3390/ma14216316 ↗
5. Fatigue behavior of Ti-6Al-4V ELI including mean stress effects10.1016/j.ijfatigue.2017.02.013 ↗
6. Measurement of residual stresses in titanium aerospace components formed via additive manufacturing10.4028/www.scientific.net/MSF.777.124 ↗
7. A critical review on effects of residual stresses on machining of titanium alloys by various non-conventional processes10.22214/ijraset.2022.40583 ↗
8. Effect of die parameters and material properties in ECAP with parallel channels10.1016/j.msea.2010.08.022 ↗
9. Experimental investigation of the equal channel forward extrusion process10.3390/met5010471 ↗
10. Tribological characterization of commercial pure titanium processed by multi-directional forging10.1007/s40195-019-00877-4 ↗
11. Enhancing mechanical properties and corrosion performance of AA6063 aluminum alloys through constrained groove pressing technique10.1016/S1003-6326(20)65339-0 ↗
12. Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys10.1016/j.jallcom.2018.12.083 ↗
13. Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression10.1016/j.msea.2021.141605 ↗
14. Monotonic and dynamic mechanical properties of PTCAE aluminum10.1016/j.jallcom.2017.02.109 ↗
15. Fatigue behaviors of materials processed by planar twist extrusion10.1007/s11661-017-4375-4 ↗
16. An overview on the influence of equal channel angular pressing parameters and its effect on materials: methods and applications
17. Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation10.1016/j.scriptamat.2006.01.042 ↗
18. Fatigue design factors for ECAPed materials10.1016/j.msea.2010.09.080 ↗
19. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys10.1016/j.msea.2011.12.072 ↗
20. Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): effects of internal defects and residual stress10.1016/j.ijfatigue.2016.04.022 ↗
21. Influence of residual stresses on high cycle fatigue strength of Ti–6Al–4V subjected to foreign object damage10.1016/S0142-1123(01)00166-9 ↗
22. A comparison of axial fatigue strength of coarse and ultrafine grain commercially pure titanium produced by ECAP10.1016/j.acme.2017.12.005 ↗
23. Fatigue performance of shot peened Cp-Ti: effect of prior severe plastic deformation
24. Fatigue life enhancement in alpha/beta Ti–6Al–4V after shot peening: an EBSD and TEM crystallographic orientation mapping study of surface layer10.1016/j.mtla.2020.100813 ↗
25. Kinetic modeling of grain boundary diffusion: the influence of grain size and surface processes10.3390/ma13051051 ↗
26. Experimental study of the influence of shot peening on the microstructure and properties of surface layer of a TC21 titanium alloy10.5147/ajms.v1i1.118 ↗
27. A review on the recent advances concerning the fatigue performance of titanium alloys for orthopedic applications10.1557/s43578-020-00087-0 ↗
28. Fatigue properties of Ti alloys with an ultrafine grained structure: challenges and achievements10.3390/met12020312 ↗
29. Exploration of equal channel angular pressing routes for efficiently achieving ultrafine microstructure in magnesium10.1016/j.msea.2018.07.041 ↗
30. Effect of ECAP die angle and route type on the experimental evolution, crystallographic texture, and mechanical properties of pure magnesium10.1515/eng-2022-0406 ↗
31. The influence of ECAP pass through Bc route on mechanical properties of aluminum alloy 606110.4028/www.scientific.net/AMR.1024.219 ↗
32. The generalized sin 2 ψ method: an advanced solution for X-ray stress analysis in textured materials10.1017/S088571561400030X ↗
33. High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique10.1016/j.surfcoat.2010.07.108 ↗
34. Wang · 2020
35. Evaluation of the equivalent mechanical properties of lattice structures based on the finite element method10.3390/ma15092993 ↗
36. Hierarchical microstructure tailoring of pure titanium for enhancing cellular response at tissue-implant interface10.1166/jbn.2021.3015 ↗
37. Electrochemical behavior of equal channel angular pressed titanium for biomedical application10.1063/1.4914232 ↗
38. Determination of residual stresses by X-ray diffraction
39. Experimental and numerical study on effect of constrained groove pressing on mechanical behaviour and morphology of aluminium and copper10.1016/j.jmapro.2021.05.008 ↗
40. The effect of microstructure parameters on the residual stresses in the ultrafine-grained sheets10.1016/j.micron.2020.102843 ↗
41. On the evolution of microstructure and texture in commercial purity titanium during multiple passes of incremental equal channel angular pressing (I-ECAP)10.1016/j.msea.2017.05.040 ↗
42. Surface residual stresses in Ti-6Al-4V friction stir welds: pre- and post-thermal stress relief10.1007/s11665-015-1610-2 ↗
43. Review paper: residual stresses in deposited thin-film material layers for micro- and nano-systems manufacturing10.3390/mi13122084 ↗
44. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation10.1016/j.scriptamat.2004.05.012 ↗
45. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation10.1016/j.scriptamat.2004.05.012 ↗
46. Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing10.1016/j.msea.2014.09.099 ↗
47. Fatigue strength of hydrostatically extruded ultrafine‐grained CP titanium
48. Research progress of ultrafine-grained pure titanium produced by equal-channel angular pressing10.1016/S1875-5372(18)30050-X ↗
49. Enhanced fatigue properties of ultrafine-grained titanium rods produced using severe plastic deformation10.4028/www.scientific.net/SSP.140.167 ↗
50. Enhanced fatigue strength of commercially pure Ti processed by severe plastic deformation10.1016/j.msea.2008.07.075 ↗
51. Microstructural evolution in copper processed by severe plastic deformation10.1016/j.msea.2005.08.201 ↗
52. Microhardness evolution of pure titanium deformed by equal channel angular extrusion10.1051/metal/2018135 ↗
53. A comprehensive review of magnesium-based alloys and composites processed by cyclic extrusion compression and the related techniques10.1016/j.pmatsci.2022.101016 ↗
54. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
55. Microstructure of titanium on complex deformation paths : comparison of ECAP , KOBO and HE techniques10.1016/j.matchar.2018.04.037 ↗
56. Continuous recrystallization during and after large strain deformation
57. Functionally graded titanium implants: characteristic enhancement induced by combined severe plastic deformation10.1371/journal.pone.0221491 ↗
58. Rollett · 2004
59. Processing of AZ31 magnesium alloy by a new noble severe plastic deformation method10.1016/j.msea.2010.10.033 ↗
60. Effect of the initial ECAP passes on crystal texture and residual stresses of 5083 aluminum alloy10.1007/s12613-020-2017-0 ↗
61. Influence of equal channel angular pressing and laser shock peening on fatigue behaviour of AM80 alloy10.1016/j.surfcoat.2019.03.072 ↗
62. Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel10.1016/j.jmatprotec.2020.116877 ↗
63. Thermal aspects of abrasive machining processes
64. Effect of residual stresses on fatigue crack growth: a numerical study based on cumulative plastic strain at the crack tip10.3390/ma15062156 ↗
65. Effects of residual stress on the measurement of hardness and elastic modulus using nanoindentation10.1557/PROC-338-127 ↗