Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance
Source abstract
Abstract
High-quality porous ceramics are extremely attractive in terms of energy conservation and consumption reduction, and thus are one of the research hotspots pursued in recent years. For this purpose, porous MgO-based ceramics with outstanding thermal shock resistance and thermal insulation performance were designed and prepared by using the direct firing method and introducing alumina with different paticle sizes as additives. The results reveal that the in-situ formed MgAl2O4 phase by alumina additives simultaneously improves the apparent porosity, thermal insulation, and thermal shock resistance of the prepared MgO-based ceramics. Specifically, the increase in the apparent porosity can be attributed to the volume expansion effect of MgAl2O4 phase, so the industrial alumina with larger particle size is more effective (20 wt% addition: the apparent porosity from 43.5 % to 55.4 %, the thermal conductivity from 0.977 to 0.389 W m−1 K−1 at 800 °C); moreover, the enhancement in thermal shock resistance can be ascribed to the residual stress effect caused by the MgAl2O4 particles, so the micron alumina with smaller particle size is more efficient (10 wt% addition: the residual strength ratio from 93.48 % to 65.13 %–113.92 % and 94.47 % after one and five air-quenching). Therefore, this work demonstrates a novel synthetic strategy for porous ceramics with great potential in the field of high-temperature thermal insulation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. High-strength microporous corundum-mullite refractory aggregates with sub-micron pores using vacuum impregnation treatment10.1016/j.jmrt.2022.06.091 ↗
2. Preparation and microstructure evolution of novel ultra-low thermal conductivity calcium silicate-based ceramic foams10.1016/j.ceramint.2022.04.128 ↗
3. High-performance thermal energy storage and thermal management via starch-derived porous ceramics-based phase change devices10.1016/j.ijheatmasstransfer.2022.123337 ↗
4. A flexible silica aerogel paper with temperature-switch opacifier for thermal insulation10.1016/j.jmrt.2023.04.022 ↗
5. The preparation and properties of high-strength porous mullite ceramics by a novel non-toxic gelcasting process10.1016/j.jeurceramsoc.2022.06.050 ↗
6. Foam-gelcasting preparation, microstructure and thermal insulation performance of porous diatomite ceramics with hierarchical pore structures10.1016/j.jeurceramsoc.2017.02.032 ↗
7. Role of liquid phase amounts in the pore evolution of lightweight bauxite: experimental and thermal simulation studies10.1016/j.ceramint.2018.12.099 ↗
8. Sintering behavior and morphology control of porous Al2O3-SiO2 ceramics for radome applications
9. Characteristics of porous mullite developed from clay and AlF3·3H2O10.1016/j.jeurceramsoc.2018.03.002 ↗
10. Energy-saving production of high value-added foamed glass ceramic from blast furnace slag and hazardous wastes containing heavy metal ions10.1016/j.jclepro.2022.135544 ↗
11. Recycling of waste red mud for fabrication of SiC/mullite composite porous ceramics10.1016/j.ceramint.2019.02.024 ↗
12. A novel route for the fabrication of melilite-spinel porous ceramics with ultralow thermal conductivity and sufficient strength10.1016/j.ceramint.2022.09.231 ↗
13. Porous mullite thermal insulators from coal gangue fabricated by a starch-based foam gel-casting method10.1007/s41779-017-0035-9 ↗
14. Porous silica/mullite ceramics prepared by foam-gelcasting using silicon kerf waste as raw material10.1016/j.matlet.2018.12.066 ↗
15. Fabrication of porous silica with controllable and tunable porosity via freeze casting10.1111/jace.18503 ↗
16. A novel approach to prepare reticulated porous TiN ceramics with high strength and high porosity by in-situ synthesis10.1016/j.jeurceramsoc.2022.01.027 ↗
17. Controlling the anisotropy behaviour of 3D printed ceramic cores: from intralayer particle distribution to interlayer pore evolution
18. The effects of pre-sintering temperature and La2O3 addition on sinterability and corrosion resistance of stoichiometric magnesium aluminate spinel10.1016/j.ceramint.2022.07.193 ↗
19. Effects of key factors on the densification and grain growth behaviour of sintered magnesia from magnesite10.1016/j.ceramint.2022.08.159 ↗
20. Designing low-carbon MgO–Al2O3–La2O3–C refractories with balanced performance for ladle furnaces10.1016/j.jeurceramsoc.2022.03.051 ↗
21. Oxidation kinetics of bauxite-based β-SiAlON with different particle sizes10.1016/j.corsci.2020.108446 ↗
22. Comparison of the microwave and conventional sintering of alumina: effect of MgO doping and particle size10.1111/jace.12320 ↗
23. Particle packings minimizing density gradients of coarse-grained compacts10.1016/j.jeurceramsoc.2019.03.039 ↗
24. Fabrication of energy-saving MgO with large grain size and low thermal conductivity: towards a new type of magnesia for high-temperature furnaces10.1016/j.conbuildmat.2022.128097 ↗
25. Microstructural properties and heat transfer characteristics of in-situ modified silica aerogels prepared with different organosilanes10.1016/j.ijheatmasstransfer.2022.122618 ↗
26. Influence of stabilizing ions and sintering process on the thermal conductivity of α-SiAlON ceramics10.1111/jace.18768 ↗
27. Towards optimized pore structure to balance the thermal-mechanical performance of foamed ceramic
28. Porosity, pore size distribution and in situ strength of concrete10.1016/S0008-8846(02)00942-0 ↗
29. Fracture toughness and surface energies of minerals: theoretical estimates for oxides, sulphides, silicates and halides10.1016/S0892-6875(02)00213-3 ↗
30. Grain-size dependence of fracture energy in ceramics: I, experiment10.1111/j.1151-2916.1981.tb10300.x ↗
31. Maximum working temperature of refractory castables: do we really know how to evaluate it?10.1016/j.ceramint.2017.04.053 ↗
32. The strength of two-phase ceramic/glass materials10.1007/BF00757910 ↗
33. Toughening of ceramics by circumferential microcracking10.1111/j.1151-2916.1981.tb09877.x ↗