journal article·2024-03Open access

Effect of cold rolling deformation on the pitting corrosion behavior of high-strength metastable austenitic stainless steel 14Cr10Mn in simulated coastal atmospheric environments

Lele Liu, Risheng Fei, Fei Sun, Hongyun Bi, E Chang, Moucheng Li

Abstract

The pitting corrosion behaviors of high-strength metastable austenitic stainless steel (MASS) 14Cr10Mn with different cold rolling reductions (0 %, 10 % and 20 %) were investigated in simulated coastal atmospheric environments by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), electrochemical measurements and cyclic corrosion test. The cold rolling deformation noticeably increases the dislocation density in the steel. As the cold rolling reduction changes from 0 % to 20 %, the pitting potential and the polarization resistance decrease to some extent in 1 wt.% NaCl solution. The cold rolling deformation increases the defect density and the contents of (Fe,Cr)-oxyhydroxides/hydroxides in the passive film on the specimen surface. After the wet-dry cyclic corrosion test, the corrosion pits initiate at the deformation band regions. The quantity, diameter and depth of the pits gradually increase with enlarging the cold rolling reduction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Uncovering impact factors of carbon emissions from transportation sector: evidence from China's Yangtze River Delta Area10.1007/s11027-020-09934-1 ↗
2. Structural emissions reduction of China's power and heating industry under the goal of "double carbon": a perspective from input-output analysis10.1016/j.spc.2022.03.003 ↗
3. Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration10.1016/j.matdes.2010.07.018 ↗
4. A comparative study on passive films of Fe-11Cr stainless steel and Fe-20Mn-11.5Al-1.4C-5Cr lightweight steel10.1016/j.jmrt.2023.09.018 ↗
5. Martensite transformation behavior and mechanical properties of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steels10.1016/j.msea.2018.03.113 ↗
6. Role of Ni content on microstructural and mechanical responses of Nb-stabilized metastable austenitic stainless steel weld metals10.1016/j.jmrt.2023.09.182 ↗
7. On nitrogen diffusion during solution treatment in a high nitrogen austenitic stainless steel10.1016/j.jmrt.2019.12.064 ↗
8. Strengthening via the formation of strain-induced martensite in stainless steels10.1016/j.msea.2003.11.084 ↗
9. Effects of Cu and Nb on martensite hardening and transformation-induced plastic deformation behavior of maraging TRIP-aided steel10.1016/j.jmrt.2023.04.035 ↗
10. A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications10.1016/j.msec.2013.06.002 ↗
11. Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials-review10.1016/j.msec.2004.08.030 ↗
12. The new 200-series: an alternative answer to Ni surcharge? risks or opportunities?
13. Nitrogen-alloyed, metastable austenitic stainless steel for automotive structural applications10.1081/AMP-120027498 ↗
14. Application of cost-effective stainless steel for automotive components10.1080/10426910903179989 ↗
15. Inverse effect of strain rate on mechanical behavior and phase transformation of super austenitic stainless steel10.1016/j.scriptamat.2006.08.064 ↗
16. Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe-Mn-Si-Al steels10.1179/mst.1998.14.12.1213 ↗
17. Electrochemical and corrosion behaviour of cold rolled AISI 301 in 1M H2SO4
18. Influence of cold working on the pitting corrosion resistance of stainless steels10.1016/j.corsci.2006.08.021 ↗
19. On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless steels10.1016/S0010-938X(02)00035-5 ↗
20. Corrosion behavior of additively manufactured AISI 316L stainless steel under atmospheric conditions10.1002/maco.202213339 ↗
21. Atmospheric corrosion resistance of MnCuP weathering steel in simulated environments10.1016/j.corsci.2011.08.028 ↗
22. Insight into atmospheric corrosion evolution of mild steel in a simulated coastal atmosphere10.1016/j.jmst.2020.11.021 ↗
23. Potential control under thin aqueous layers using a Kelvin Probe10.1016/j.corsci.2006.10.017 ↗
24. Effect of cold-working in the passive behavior of 304 stainless steel in sulfate media10.1149/1.1516774 ↗
25. Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel10.1016/j.corsci.2013.11.039 ↗
26. Effect of cold deformation on corrosion behavior of selective laser melted 316L stainless steel bipolar plates in a simulated environment for proton exchange membrane fuel cells10.1016/j.corsci.2022.110257 ↗
27. Influence of cold rolling on the corrosion resistance of austenitic steel
28. Effects of cold deformation on electrochemical corrosion behaviors of 304 stainless steel10.1108/ACMM-12-2015-1620 ↗
29. Influence of cold work on pitting corrosion behavior of a high nitrogen stainless steel10.1149/1.2939213 ↗
30. The effect of cold work by rolling on electrochemical behaviour of Cr-Mn austenitic stainless steel in chloride environment10.1088/2053-1591/aac974 ↗
31. Dislocation source and pile-up in a twinning-induced plasticity steel at high-cycle fatigue10.1007/s40195-020-01176-z ↗
32. Crack nucleation due to dislocation pile-ups at twin boundary-grain boundary intersections10.1016/j.msea.2015.02.048 ↗
33. Effect of austenite stability on the pitting corrosion resistance of cold worked stainless steels10.1016/j.corsci.2008.12.026 ↗
34. A study of the pitting corrosion of cold-worked stainless steel10.1016/S0010-938X(78)80086-9 ↗
35. Corrosion behavior of deformed low-nickel stainless steel in groundwater solution10.1016/j.engfailanal.2019.01.073 ↗
36. Effect of texture on corrosion behavior of AISI 304L stainless steel10.1016/j.matchar.2004.11.004 ↗
37. Comparison of rolled and heat treated SS304 in chloride solution using electrochemical and XPS techniques10.1016/S0010-938X(03)00099-4 ↗
38. Pitting resistance of cold-worked commercial austenitic stainless steels in solution simulating seawater10.1149/1.2128863 ↗
39. Influence of cold work on electrochemical behavior of 316L ASS in PEMFC environment10.1088/2053-1591/aaaf27 ↗
40. X-ray diffraction analysis by Williamson-Hall, Halder-Wagner and size-strain plot methods of CdSe nanoparticles-a comparative study10.1016/j.matchemphys.2019.122021 ↗
41. Roles of nanosized Fe3O4 on supercapacitive properties of carbon nanotubes10.1016/j.cap.2010.08.018 ↗
42. Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel10.1016/j.corsci.2020.109187 ↗
43. Chemical composition and electronic structure of the passive layer formed on stainless steels in a glucose-oxidase solution10.1016/j.electacta.2008.02.070 ↗
44. Comparative study of structural and semiconducting properties of passive films and thermally grown oxides on AISI 304 stainless steel10.1016/j.corsci.2011.05.012 ↗
45. Corrosion behavior of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steel in acidic NaCl solution10.1016/j.jmrt.2022.05.054 ↗
46. Effect of cold deformation on pitting corrosion of 00Cr18Mn15Mo2N0.86 stainless steel for coronary stent application10.1016/j.msec.2015.11.048 ↗
47. Electrochemical corrosion characteristics of type 316L stainless steel in hot concentrated seawater10.1016/j.corsci.2013.12.004 ↗
48. Inhibitive effect of sodium eperuate on zinc corrosion in alkaline solutions10.1016/j.corsci.2008.04.019 ↗
49. Localized corrosion evaluation of newly developed stainless-steel alloys in chloride medium through dynamic and localized micro electrochemical techniques10.1016/j.jmrt.2023.08.228 ↗
50. The metastable pitting potential and its relation to the pitting potential for four materials in chloride solutions10.1016/j.corsci.2013.11.015 ↗
51. Stochastic studies of passivity breakdown10.1016/0010-938X(90)90140-Z ↗
52. Whitney award lecture: statistical and stochastic approaches to localized corrosion10.5006/1.3292074 ↗
53. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
54. Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel10.1016/j.corsci.2019.108091 ↗
55. Effects of cold work and sensitization treatment on the corrosion resistance of high nitrogen stainless steel in chloride solutions10.1016/j.electacta.2008.09.053 ↗
56. Semiconducting properties of thermally grown oxide films on AISI 304 stainless steel10.1016/S0010-938X(99)00082-7 ↗
57. The electronic structure of passive films formed on stainless steels10.1016/0010-938X(95)00084-W ↗
58. Dissolution and repair of passive film on Cu-bearing 304L stainless steels immersed in H2SO4 solution10.1016/j.jmst.2018.02.017 ↗
59. Effect of dissolved oxygen on electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater10.1016/j.jmst.2020.06.030 ↗
60. Electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater under vacuum conditions10.1016/j.corsci.2019.108383 ↗
61. Effect of Mn additions on the corrosion behaviour of TWIP Fe-Mn-Al-Si austenitic steel in chloride solution10.1016/j.corsci.2019.04.026 ↗
62. The influence of nitrogen and molybdenum on passive films formed on the austeno-ferritic stainless steel 2205 studied by AES and XPS10.1016/0010-938X(94)00148-Y ↗
63. Microstructure and texture evolution of cold-rolled low-Ni Cr-Mn-N austenitic stainless steel during bending10.1007/s10853-020-05611-5 ↗
64. Insight in the impact of pre-deformation on structure-deformation-property relationship in Cr-Mn-N stainless steel
65. Structural stability of austenitic CrMn(Mo)N steels for high-strength, corrosion-resistant retaining rings10.1002/srin.200300211 ↗
66. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
67. The effect of cold rolling on microstructure and mechanical properties of a new Cr-Mn austenitic stainless steel in comparison with AISI 316 stainless steel10.1007/s12666-016-0921-9 ↗
68. Microband-induced plasticity in a high Mn-Al-C light steel10.1016/j.msea.2008.05.042 ↗
69. Toward a more fundamental understanding of corrosion processes10.5006/1.3582030 ↗
70. An electrochemical impedance spectroscopic study of the passive state on Alloy-2210.1016/j.electacta.2005.02.103 ↗
71. Influence of cold deformation and phase transformation on the electrochemical corrosion behavior of nitrogen-alloyed stainless steel in chloride solution
72. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
73. Electrochemical investigation of passive film in pre-deformation AISI 304 stainless steels10.1016/j.apsusc.2012.08.058 ↗
74. The point defect model for the passive state10.1149/1.2069096 ↗
75. Effect of electropolishing on corrosion of nuclear grade 316L stainless steel in deaerated high temperature water10.1016/j.corsci.2016.09.002 ↗
76. The effects of severe surface deformation on plasma nitriding of austenitic stainless steel10.1016/j.surfcoat.2004.05.020 ↗
77. Fatigue properties of gas nitrided austenitic stainless steel pre-treated with fine particle peening10.1016/j.ijfatigue.2009.07.019 ↗
78. Nitriding behavior and corrosion properties of AISI 304L and 316L austenitic stainless steel with deformation-induced martensite10.1016/j.surfcoat.2017.05.059 ↗
79. Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels10.1016/j.corsci.2006.05.041 ↗
80. Growth of corrosion pits on stainless steel in chloride solution containing dilute sulphate
81. Effect of NH4+ on the pitting corrosion behavior of 316 stainless steel in the chloride environment10.1016/j.jelechem.2021.115368 ↗
82. Effects of Mn on the localized corrosion behavior of Fe-18Cr alloys10.1016/j.electacta.2010.01.006 ↗
83. Impact of surface condition on sulphide stress corrosion cracking of 316L stainless steel10.1016/j.corsci.2013.02.002 ↗
84. Relationship between the martensite phase transition and pitting susceptibility of AISI-321 stainless steel in acidic solutions of NaCl10.1007/s11003-005-0052-7 ↗