journal article·2024-03Open access

Effect of heat-treatment on corrosion behavior of Mg-4Gd-2Nd alloy

Qingwei Qin, Hongbin Ma, Liang Liang, Ye Liu, Zhaopeng Lv, Jinhui Wang, Peipeng Jin

Abstract

Understanding the corrosion behavior of Mg alloys in the Cl− environments is crucial to preventing catastrophic accidents in their facilities due to their poor corrosion. The microstructures and corrosion behaviors of the Mg-4Gd-2Nd alloy under different heat-treatment conditions were investigated. The content of Mg41Nd5 in the alloy decreased significantly with increasing heat-treatment temperature. It was found that the formation of solid solution atomic oxides separates the lamellar Mg(OH)2 during the corrosion process of Mg alloys. With the increase of solid solution atomic oxides, lamellar Mg(OH)2 is no longer clustered and laid flat on the alloy surface. The loose Mg(OH)2 corrosion product film is eroded by Cl− and converted to the rod-like Mg2Cl(OH)3·4H2O, which lead to the detachment of the loose lamellar Mg(OH)2 in pieces. Furthermore, the corrosion products of the as-extruded alloy fall off in large blocks, whereas the corrosion products of the heat-treated alloys fall off in small pieces. Therefore, 540 °C-treated specimen exhibits best corrosion resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Microstructure evolution and corrosion resistance improvement of Mg–Gd–Y–Zn–Zr alloys via surface hydrogen treatment10.1016/j.corsci.2021.109746 ↗
2. Microstructures, mechanical properties and corrosion behaviors of Mg–Y–Zn–Zr alloys with specific Y/Zn mole ratios10.1016/j.jallcom.2014.10.177 ↗
3. Effect of Zr on the microstructure, mechanical properties and corrosion resistance of Mg–10Gd–3Y magnesium alloy10.1016/j.msea.2009.06.002 ↗
4. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
5. Corrosion fatigue of extruded magnesium alloys10.1016/S0921-5093(03)00409-X ↗
6. Corrosion behavior and mechanism of Mg–Er–Zn–Zr alloys in different states10.1016/j.jmrt.2022.05.024 ↗
7. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
8. Improving corrosion resistance of Mg–Li alloys by Sn microalloying10.1016/j.jmrt.2023.07.205 ↗
9. Simultaneously improving strength and ductility of AZ91-type alloys with minor Gd addition10.1016/j.jallcom.2019.06.313 ↗
10. A quasi-passivated film formed on as-solutionized Mg-Sm-Zn-Zr alloy in NaCl solution10.1016/j.corsci.2022.110136 ↗
11. Corrosion behavior of Mg–Gd–Zn based alloys in aqueous NaCl solution10.1016/j.jma.2014.08.002 ↗
12. Effect of rare earth element Ce and La on corrosion behavior of AM60 magnesium alloy10.1016/j.corsci.2009.03.018 ↗
13. Roles of pH in the NH4+-induced corrosion of AZ31 magnesium alloy in chloride environment10.1016/j.jma.2021.02.004 ↗
14. Effects of phase composition and content on the microstructures and mechanical properties of high strength Mg–Y–Zn–Zr alloys10.1016/j.matdes.2015.09.087 ↗
15. Effect of initial temper on the creep behavior of a Mg–Gd–Nd–Zr alloy10.1016/j.msea.2008.03.009 ↗
16. On the solid solution substitutional position and properties of Mg–Gd alloy10.1016/j.jmrt.2022.08.050 ↗
17. Individual effect of Y and Nd on the microstructure formation of Mg-Y-Nd alloys processed by severe plastic deformation and their effect on the subsequent mechanical and corrosion properties10.1016/j.jma.2023.01.012 ↗
18. Insight into the role of Y addition in the microstructures, mechanical and corrosion properties of as-cast Mg-Gd-Y-Zn-Ca-Zr alloys10.1016/j.matdes.2022.110980 ↗
19. Tailoring the microstructural characteristic and improving the corrosion rate of Mg-Gd-Ni alloy by heat treatment with different volume fraction of LPSO phase10.1016/j.corsci.2022.110806 ↗
20. Recent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
21. Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy10.1016/j.msea.2021.141320 ↗
22. Effect of substituting Gd with 3 wt% Nd on high temperature creep behaviors of peak-aged Mg-10Gd-0.4Zr casting Mg alloy10.1016/j.jmrt.2023.07.049 ↗
23. High cycle fatigue behavior and mechanical performance of a novel sand-cast Mg-Nd-Gd alloy: effect of heat treatment10.1016/j.msea.2021.141172 ↗
24. Effect of Nd and Y on the microstructure and mechanical properties of ZK60 alloy10.1016/j.msea.2006.04.028 ↗
25. Effects of surface micro–galvanic corrosion and corrosive film on the corrosion resistance of AZ91–xNd alloys10.1016/j.apsusc.2020.147761 ↗
26. Effects of the second phases on corrosion resistance of AZ91-xGd alloys treated with ultrasonic vibration10.1016/j.jallcom.2019.01.002 ↗
27. Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys10.1016/j.jallcom.2016.11.100 ↗
28. Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy10.1016/j.jallcom.2019.153462 ↗
29. Significantly improved corrosion resistance of Mg-15Gd-2Zn-0.39Zr alloys: effect of heat-treatment10.1016/j.jmst.2019.03.027 ↗
30. Improving corrosive wear resistance of Mg-Zn-Y-Zr alloys through heat treatment10.1016/j.jma.2021.08.011 ↗
31. The effects of a corrosion product film on the corrosion behavior of Mg-Al alloy with micro-alloying of yttrium in a chloride solution10.1016/j.corcom.2022.10.002 ↗
32. Effect of Gd on microstructure, mechanical properties, and corrosion behavior of as-homogenized Mg−8Li−3Al−2Zn−0.2Zr alloy10.1016/S1003-6326(22)65961-2 ↗
33. Improving the corrosion resistance of Mg-8Li-3Al-2Zn alloy by combining Gd alloying and hot extrusion10.1016/j.jallcom.2023.171205 ↗
34. Isothermal section of Mg–Nd–Gd ternary system at 723 K10.1016/S1003-6326(14)63125-3 ↗
35. Effect of extrusion on the microstructure and corrosion behavior of Mg-Zn-Mn-(0, 1.5)Sr alloys in Hank's solution10.1016/j.corsci.2021.109975 ↗
36. Effect of solid solution Zn atoms on corrosion behaviors of Mg-2Nd-2Zn alloys10.1016/j.corsci.2021.110023 ↗
37. Development of a new generation of quench and partitioning steels: influence of processing parameters on texture, nanoindentation, and mechanical properties10.1016/j.matdes.2019.108329 ↗
38. Effect of solid solution Zn atoms on corrosion behaviors of Mg-2Nd-2Zn alloys10.1016/j.corsci.2021.110023 ↗
39. Electrochemical investigations on the corrosion behaviour of magnesium alloy ZE41 in a combined medium of chloride and sulphate10.1016/j.jma.2013.08.003 ↗
40. Corrosion behavior of Mg-Zn-Zr-RE alloys under physiological environment – impact on mechanical integrity and biocompatibility10.1016/j.jma.2021.11.025 ↗
41. Effect of heat treatment on corrosion and electrochemical behaviour of Mg–3Nd–0.2Zn–0.4Zr (wt.%) alloy10.1016/j.electacta.2006.09.069 ↗
42. An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions10.1149/1.2401056 ↗
43. Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions10.1016/j.corsci.2020.108962 ↗
44. Effect of alloyed Sr on the microstructure and corrosion behavior of biodegradable Mg-Zn-Mn alloy in Hanks' solution10.1016/j.corsci.2019.06.022 ↗
45. The anodic dissolution of magnesium in chloride and sulphate solutions10.1016/S0010-938X(97)00090-5 ↗
46. Eelectrochemical properties and corrosion resistance of carbon-ion-implanted magnesium10.1016/j.corsci.2014.01.015 ↗
47. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE=Ce, La, Nd, Y, Gd10.1016/j.corsci.2013.06.032 ↗