Fatigue performance of beta titanium alloy topological porous structures fabricated by laser powder bed fusion
Source abstract
Abstract
The performance of porous β-titanium alloys is crucial for their diverse applications, with fatigue characteristics playing a pivotal role in shaping the design of these porous structures. While topological configurations have exhibited exceptional property, a systematic understanding of their fatigue performance is lacking in recent literature. This study reveals that at a porosity level of ∼75%, designed topologically optimized (TO) structures surpass rhombic dodecahedron (RD) structures in compressive yield strength by ∼4 times (149 ± 3 MPa vs. 38 ± 1 MPa). Furthermore, post-heat treatment further enhances the yield strength of TO structures by ∼15%, reaching 172 ± 3 MPa due to grain refinement and β phase stabilization. Moreover, the as-printed TO structure exhibits exceptional compressive fatigue endurance, enduring stress approximately ∼5 times higher than the as-printed RD structure at a cycle count of 106. Microstructure analysis after fatigue testing reveals a reduction in the α" martensitic phase and an increase in stress-induced ω phase in the heat-treated TO structure, contributing to a slight improvement in fatigue strength compared to the as-printed TO structure. The exceptional fatigue performance observed in LPBF-built beta-type titanium alloy within TO structures highlights the complex relationship between porous structure design, microstructure, compressive strength, and fatigue performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting10.1016/j.actamat.2016.04.029 ↗
2. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
3. Advances in additively manufactured titanium alloys by powder bed fusion and directed energy deposition: microstructure, defects, and mechanical behavior10.1016/j.jmst.2023.11.003 ↗
4. Non-layer-wise fracture and deformation mechanism in beta titanium cubic lattice structure manufactured by selective laser melting10.1016/j.msea.2021.141696 ↗
5. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
6. Research progress on the design and performance of porous titanium alloy bone implants10.1016/j.jmrt.2023.01.155 ↗
7. Understanding melt pool characteristics in laser powder bed fusion: an overview of single and multi-track melt pools for process optimization
8. On the importance of nano-oxide control in laser powder bed fusion manufactured Ni-based alloys to enhance fracture properties10.1016/j.mtla.2023.101958 ↗
9. Additive manufacturing of tungsten, tungsten-based alloys, and tungsten matrix composites10.1007/s42864-022-00153-6 ↗
10. Additive manufacturing of titanium alloys
11. Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗
12. Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting10.1016/j.matdes.2014.10.063 ↗
13. Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting10.1016/j.scriptamat.2018.05.010 ↗
14. Fatigue behavior of porous biomaterials manufactured using selective laser melting10.1016/j.msec.2013.08.006 ↗
15. Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method10.1016/j.actbio.2014.06.010 ↗
16. Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting10.1016/j.actamat.2011.10.051 ↗
17. Low-temperature superplasticity of cryorolled Ti-6Al-4V titanium alloy sheets10.1007/s42864-022-00182-1 ↗
18. Titanium based bone implants production using laser powder bed fusion technology10.1016/j.jmrt.2022.01.087 ↗
19. Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution10.1016/j.corsci.2015.10.041 ↗
20. Corrosion and passivation behavior of Ti-6Al-4V surfaces treated with high-energy pulsed laser: a comparative study of cast and 3D-printed specimens in a NaCl solution10.1016/j.surfcoat.2023.129849 ↗
21. Selective laser melting of Ti–35Nb composite from elemental powder mixture: microstructure, mechanical behavior and corrosion behavior10.1016/j.msea.2019.06.001 ↗
22. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture10.1016/j.jmst.2020.05.052 ↗
23. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
24. Biomedical titanium alloys and their additive manufacturing10.1007/s12598-016-0793-5 ↗
25. Low-cycle fatigue performance of remelted laser powder bed fusion (L-PBF) biomedical Ti25Ta10.1016/j.msea.2020.140228 ↗
26. Tailoring deformation and superelastic behaviors of beta-type Ti-Nb-Mn-Sn alloys10.1016/j.jmbbm.2020.103867 ↗
27. Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys10.1016/j.msea.2019.138340 ↗
28. Manufacturability of lattice structures fabricated by laser powder bed fusion: a novel biomedical application of the beta Ti-21S alloy
29. Influence of heat treatment on the mechanical performance of Ti21S octet truss lattice structure fabricated by laser powder bed fusion
30. History-independent cyclic response of nanotwinned metals10.1038/nature24266 ↗
31. Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.actamat.2018.02.060 ↗
32. Fatigue performances of selective laser melted Ti-6Al-4V alloy: influence of surface finishing, hot isostatic pressing and heat treatments10.1016/j.ijfatigue.2018.11.019 ↗
33. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
34. Fatigue performance of additively manufactured meta-biomaterials: the effects of topology and material type10.1016/j.actbio.2017.11.014 ↗
35. Improved fatigue behavior of low-carbon steel 20GL by applying ultrasonic impact treatment combined with the electric discharge surface alloying10.1016/j.msea.2016.02.036 ↗
36. Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening10.1016/j.corsci.2021.109597 ↗
37. Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts10.1016/j.ijfatigue.2017.05.008 ↗
38. The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.jmbbm.2016.01.034 ↗
39. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
40. Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting10.1016/j.actamat.2016.12.052 ↗
41. Efficient optimization framework for L-PBF fatigue enhanced Ti6Al4V lattice component10.1016/j.matdes.2023.111975 ↗
42. Optimal microstructures of elastoplastic cellular materials under various macroscopic strains10.1016/j.mechmat.2017.10.002 ↗
43. Stress-based topology optimization using bi-directional evolutionary structural optimization method10.1016/j.cma.2018.01.035 ↗
44. Implications of modeling approaches on the fatigue behavior of cellular solids
45. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
46. Effect of Nb content on deformation behavior and shape memory properties of Ti–Nb alloys10.1016/j.jallcom.2012.02.023 ↗
47. Cyclic deformation characteristics of the metastable β-type Ti–40Nb alloy10.1016/j.msea.2019.05.096 ↗
48. Low-cycle fatigue properties of a titanium alloy exhibiting nonlinear elastic deformation behavior10.1016/j.actamat.2011.04.015 ↗
49. Stress release-induced interfacial twin boundary ω phase formation in a β type Ti-based single crystal displaying stress-induced α” martensitic transformation10.1016/j.actamat.2018.02.036 ↗
50. ω phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable β titanium alloy10.1016/j.actamat.2018.03.053 ↗
51. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance10.1016/j.ijfatigue.2012.11.011 ↗
52. Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti–29Nb–13Ta–4.6Zr10.1016/S0142-9612(03)00069-3 ↗
53. Enhanced fatigue characteristics of a topology-optimized porous titanium structure produced by selective laser melting
54. The role of pore structures on the fatigue properties of additively manufactured porous tantalum scaffolds produced by electron beam powder bed fusion10.1016/j.jmrt.2022.06.096 ↗
55. The effect of microstructure on the fatigue behavior of titanium alloy graded porous structures fabricated by selective laser melting10.1016/j.jmrt.2023.10.281 ↗
56. Crystallographic mechanism for crack propagation in the T7451 Al–Zn–Mg–Cu alloy10.1016/j.msea.2010.05.063 ↗
57. Stabilizing 3D-printed metal alloys10.1126/science.adn6566 ↗
58. A crystallographic mechanism for fatigue crack propagation through grain boundaries10.1016/S1359-6454(00)00214-7 ↗
59. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
60. Revised semiempirical approach to predict the occurrence of twinning in titanium alloys10.1021/acsomega.1c05474 ↗
61. Comparison of microstructure and mechanical behavior of Ti-35Nb manufactured by laser powder bed fusion from elemental powder mixture and prealloyed powder10.1016/j.jmst.2021.07.021 ↗
62. Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression10.1016/j.matdes.2022.110939 ↗
63. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
64. Processing and properties of topologically optimised biomedical Ti–24Nb–4Zr–8Sn scaffolds manufactured by selective laser melting10.1016/j.msea.2015.06.088 ↗