Enhancing the strength-ductility synergy in hot-forged Fe50Mn30Co10Cr10 high entropy alloy (HEA) through carbon additions
Source abstract
Abstract
In this work, we systematically investigated the effect of carbon additions on the microstructure and room temperature mechanical properties of hot-forged Fe50Mn30Co10Cr10 HEA. The different carbon contents were introduced to Fe50-xMn30Co10Cr10Cx (x = 1, 2.5, 6 at.%, hereinafter, referred as C1, C2.5 and C6, respectively) HEAs to enhance the strength-ductility synergy by triggering the multiple strengthening mechanisms. The results showed that the grain sizes were decreased with increasing of carbon content, while a high fraction of mechanical twins ∼45% were generated in C2.5 HEA, and their fractions were ∼35% in C1 and C6 HEAs. Moreover, the discrete nano-sized M23C6 carbides in C2.5 HEA were transformed into continuous mico-sized M23C6 carbides along the grain boundaries in C6 HEA. Therefore, C2.5 HEA possessed high yield strength of 584 MPa, tensile strength of 1.03 GPa and outstanding ductility of 68%, i-e., breaking the strength-ductility paradox. A highest yield strength of∼662 MPa and tensile strength of more than 1 GPa were observed for C6HEA with refine grains, although the ductility was only ∼10%, which indicated that the massive carbon addition could effectively enhanced the strength of HEA but at the cost of ductility due to the presence of coarse M23C6 carbide precipitation. The enhanced mechanical properties of studied HEAs are mainly ascribed to the contribution of multiple strengthening mechanisms including precipitation, grain boundary, dislocation and interstitial solid solution strengthening.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Enhancement in mechanical properties through an FCC-to-HCP phase transformation in an Fe-17.5Mn-10Co-12.5Cr-5Ni-5Si (in at%) medium-entropy alloy10.1016/j.jallcom.2021.162765 ↗
2. Cryogenic mechanical behavior of a TRIP-assisted dual-phase high-entropy alloy10.1007/s12274-021-3719-y ↗
3. Cryogenic strength improvement by utilizingroom-temperature deformation twinning in high-entropy alloy
4. Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys10.1016/j.intermet.2019.106476 ↗
5. Unraveling the dislocation-precipitate interactions in high-entropy alloys10.1016/j.ijplas.2020.102819 ↗
6. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
7. Novel Co-free high performance TRIP and TWIP medium-entropy alloys at cryogenic temperatures10.1016/j.jmst.2020.05.010 ↗
8. Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy10.1080/21663831.2018.1538023 ↗
9. Sustaining strength-ductility synergy of SLM Fe50Mn30Co10Cr10 metastable high-entropy alloy by Si addition10.1016/j.intermet.2022.107565 ↗
10. Strengthening mechanisms in high entropy alloys: a review
11. Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping10.1016/j.jallcom.2022.165103 ↗
12. Breaking the strength-ductility paradox in advanced nanostructured Fe-based alloys through combined Cu and Mn additions10.1016/j.scriptamat.2020.05.008 ↗
13. The determining role of carbon addition on mechanical performance of a non-equiatomic high-entropy alloy10.1016/j.jmst.2021.09.005 ↗
14. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
15. Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy10.1016/j.jallcom.2023.170225 ↗
16. Effect of C content on microstructure and tensile properties of as-cast CoCrFeMnNi high entropy alloy10.1016/j.matchemphys.2017.08.011 ↗
17. Effect of carbon on cryogenic tensile behavior of CoCrFeMnNi-type high entropy alloys10.1016/j.jallcom.2019.152000 ↗
18. Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy
19. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
20. The effect of interstitial carbon on the mechanical properties and entropy alloys10.1016/j.actamat.2016.08.072 ↗
21. He · 2021 · vol. 25
22. Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys10.1016/j.jallcom.2018.01.348 ↗
23. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
24. The role of carbon in grain refinement of cast CrFeCoNi high-entropy alloys10.1007/s11661-018-4549-8 ↗
25. Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility10.1016/j.msea.2018.01.045 ↗
26. The way to improve strength and ductility of heavily carbon-alloyed high-entropy Fe20Mn20Cr20Ni20Co15C5 alloy10.1016/j.msea.2022.143628 ↗
27. On the difference in carbon- and nitrogen-alloying of equiatomic FeMnCrNiCo high-entropy alloy10.1016/j.matlet.2020.128183 ↗
28. Microstructures and mechanical properties of nano carbides reinforced CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2019.03.403 ↗
29. In-situ oxide particles reinforced Fe40Mn40Co10Cr10 high-entropy alloy by internal oxidation and powder forging10.1016/j.scriptamat.2022.114692 ↗
30. A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing10.1016/j.matdes.2021.110161 ↗
31. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
32. Effects of carbon addition on microstructure and mechanical properties of Fe50Mn30Co10Cr10 high-entropy alloy prepared by powder metallurgy10.1016/j.jmrt.2022.07.067 ↗
33. High temperature tensile properties of as-cast and forged CrMnFeCoNi high entropy alloy10.1016/j.msea.2022.143570 ↗
34. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
35. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
36. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
37. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures10.1016/j.mattod.2019.03.001 ↗
38. Breakthrough the strength-ductility trade-off in a high-entropy alloy at room temperature via cold rolling and annealing10.1016/j.msea.2020.140264 ↗
39. Strain-induced martensitic transformation near twin boundaries in a biomedical Co-Cr-Mo alloy with negative stacking fault energy10.1016/j.actamat.2012.11.041 ↗
40. Dislocation plasticity reigns in a traditional twinning-induced plasticity steel by in situ observation10.1016/j.mtnano.2018.11.004 ↗
41. Eliminating mixed grain structure of Fe–22Cr–25Ni austenitic heat–resistant steel via strain–induced M23C6 precipitation and re–dissolution10.1016/j.jmrt.2023.03.220 ↗
42. In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: carbon content effects on microstructure, mechanical properties, and deformation mechanism10.1016/j.compositesb.2021.108638 ↗
43. Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy10.1016/j.msea.2019.138726 ↗
44. Two modes of grain boundary pinning by coherent precipitates10.1016/j.actamat.2017.06.031 ↗
45. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G10.1016/j.jmst.2017.03.023 ↗
46. M23C6 precipitation strengthened Fe0.6MnNi1.4 medium entropy alloy matrix composites10.1016/j.msea.2022.144319 ↗
47. Impact toughness of a modified HR3C austenitic steel after long-term thermal exposure at 650 °C10.1016/j.msea.2018.10.084 ↗
48. Precipitation behavior of M23C6 in high nitrogen austenitic heat-resistant steel10.1016/j.jallcom.2022.164013 ↗
49. Effect of C addition on microstructure and mechanical properties of as-cast HEAs (Fe50Mn30Co10Cr10)100-xCx10.1016/j.matchemphys.2020.123501 ↗
50. Interstitial equiatomic CoCrFeMnNi high-entropy alloys : carbon content , microstructure , and compositional homogeneity effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
51. Effect of carbon upon mechanical properties and deformation mechanisms of TWIP and TRIP-assisted high entropy alloys10.1016/j.msea.2022.144126 ↗
52. A novel high-entropy alloy with multi-strengthening mechanisms : activation of TRIP effect in C-doped high-entropy alloy10.1016/j.msea.2022.144220 ↗
53. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
54. Precipitation behavior of selective laser melted FeCoCrNiC 0 . 05 high entropy alloy10.1016/j.intermet.2018.12.001 ↗
55. Effects of hot-forging and subsequent annealing on microstructure and mechanical behaviors of Fe35Ni35Cr20Mn10 high-entropy alloy10.1016/j.matchar.2021.111251 ↗
56. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys
57. Effect of carbon content and annealing on structure and hardness of the CoCrFeNiMn-based high entropy alloys10.1016/j.jallcom.2016.06.103 ↗
58. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy10.1016/j.jallcom.2019.06.204 ↗
59. Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
60. Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition10.1016/j.msea.2020.139587 ↗
61. Hall-Petch strengthening in nanocrystalline metals10.1016/0921-5093(93)90319-A ↗
62. Ultrafine-grained AlCoCrFeNi2.1 eutectic high-entropy alloy10.1080/21663831.2016.1160451 ↗
63. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗