Effects of oscillating frequency on keyhole stability and porosity inhibition in high-power laser-arc hybrid welding of 10-mm-thick 6082 aluminum alloy
Source abstract
Abstract
Keyhole instability and high porosity are prone to occur in laser-arc hybrid welding (LAHW) with an increase in aluminum alloy thickness. In this study, a high-power laser up to 8.0 kW at different oscillating frequencies (f) was used to achieve acceptable hybrid welding of a 10-mm-thick 6082 aluminum alloy. According to the observations of the laser keyhole from a high-speed camera, increasing f from 0 to 100 Hz increased the opening diameter from 1.3 to 1.6 mm and decreased the collapse frequency from 642 to 353 Hz. With the improved keyhole stability, the weld porosity decreased from 4.5% to 1.8%. In addition, beam oscillation refined the weld microstructure by 15% and transferred the tensile fracture from the weld center to the heat affected zone. Although the change in the ultimate tensile strength (UTS) was not obvious, the elongation increased by 25%. Beam oscillation promoted the formation of turbulent flow inside the molten pool, homogenized the melt flow, and reduced the necking tendency of the keyhole caused by the melt flow, thus greatly improving the keyhole stability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Development and applications of aluminum alloys for aerospace industry10.1016/j.jmrt.2023.09.274 ↗
2. Mechanical properties of rolled and aged AA6061 sheets at room-temperature and cryogenic environments10.1016/j.jallcom.2020.158449 ↗
3. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
4. Microstructure, mechanical properties and fatigue behaviour of a new high-strength aluminium alloy AA 608610.1016/j.jallcom.2023.168976 ↗
5. Microstructural evolutions and mechanical properties of 6082 aluminum alloy part produced by a solution-forging integrated process10.1016/j.jmatprotec.2022.117715 ↗
6. The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy10.1016/j.actamat.2017.12.036 ↗
7. A short review on aluminium alloys and welding in structural applications10.1016/j.matpr.2021.01.447 ↗
8. Difficulties and redressal in joining of aluminium alloys by GMA and GTA welding: a review10.1016/j.jmrt.2023.01.183 ↗
9. Review on multi-information acquisition, defect prediction and quality control of aluminum alloy GTAW process10.1016/j.jmapro.2023.11.025 ↗
10. A comparative study of mechanical properties of metal inert gas (MIG)-cold metal transfer (CMT) and fiber laser-MIG hybrid welds for 6005A T6 extruded sheet10.1007/s00170-017-0914-9 ↗
11. A review of various improvement strategies for joint quality of AA 6061-T6 friction stir weldments10.1016/j.jmrt.2021.01.070 ↗
12. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution10.1016/j.pmatsci.2020.100752 ↗
13. Friction stir welding of aluminum in the aerospace industry: the Current Progress and State-of-the-Art Review10.3390/ma16082971 ↗
14. Research progress on the microstructure and mechanical properties of friction stir welded Al-Li alloy joints10.1016/j.jmapro.2022.07.067 ↗
15. Behavior and stability of droplet transfer under laser-MIG hybrid welding with synchronized pulse modulations10.1016/j.jmapro.2020.02.017 ↗
16. Hybrid laser arc welding: State-of-art review10.1016/j.optlastec.2017.09.038 ↗
17. Relationship between pool characteristic and weld porosity in laser arc hybrid welding of AA6082 aluminum alloy10.1016/j.jmatprotec.2016.10.001 ↗
18. Effect of ultrasonic power on porosity, microstructure, mechanical properties of the aluminum alloy joint by ultrasonic assisted laser-MIG hybrid welding10.1016/j.optlastec.2019.105619 ↗
19. Mechanism analysis on suppressing porosity in laser-MIG hybrid welding of aluminum alloy via external magnetic field10.1016/j.jmapro.2023.06.057 ↗
20. Effect of beam oscillation on weld formation, microstructure and mechanical properties in vacuum laser beam welding of thick section 5083 aluminum alloy
21. Weld formation mechanism during fiber laser welding of aluminum alloys with focus rotation and vertical oscillation10.1016/j.jmapro.2018.10.004 ↗
22. A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: morphology, microstructure and mechanical properties10.1016/j.jmapro.2020.01.018 ↗
23. Effect of beam oscillating frequency on the microstructure and mechanical properties of dissimilar laser welding of AA2060 and AA6061 alloy
24. Effects of beam oscillation modes on microstructure and mechanical properties of laser welded 2060 Al-Li alloy joints
25. Effects of laser oscillating frequency on energy distribution, molten pool morphology and grain structure of AA6061/AA5182 aluminum alloys lap welding10.1016/j.jmrt.2021.09.141 ↗
26. Nucleation mechanism in oscillating laser welds of 2024 aluminium alloy: a combined experimental and numerical study
27. Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis10.1016/j.jmapro.2023.08.001 ↗
28. Influence of scan paths on flow dynamics and weld formations during oscillating laser welding of 5A06 aluminum alloy10.1016/j.jmrt.2020.12.102 ↗
29. Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy10.1016/j.optlastec.2020.106540 ↗
30. Suppressing porosity of a laser keyhole welded Al-6Mg alloy via beam oscillation10.1016/j.jmatprotec.2019.116382 ↗
31. A pathway to mitigate macrosegregation of laser-arc hybrid Al-Si welds through beam oscillation10.1016/j.ijheatmasstransfer.2020.119467 ↗
32. Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding10.1016/j.jmatprotec.2016.11.028 ↗
33. Keyhole stability, arc behavior, and molten pool flow in narrow-gap oscillating laser-arc hybrid welding of titanium alloy10.1016/j.ijheatmasstransfer.2023.124922 ↗
34. Stability analysis and porosity inhibition mechanism of oscillating laser-arc hybrid welding process for medium-thick plate TC4 titanium alloy10.1016/j.optlastec.2024.110569 ↗
35. Formation and suppression mechanism of wavy edge in oscillating laser-arc hybrid fillet welding of aluminum alloy10.1016/j.optlastec.2024.110691 ↗
36. Porosity suppressing and grain refining of narrow-gap rotating laser-MIG hybrid welding of 5A06 aluminum alloy10.1016/j.jmapro.2021.06.036 ↗