journal article·2024-05Open access

Optimizing strength & ductility combination of medium-carbon TRIP steel via multi-stage work hardening

X.X. Dong, Y.F. Shen, N. Jia, W.Y. Xue, J.P. Li

Abstract

The effect of the retained austenite (RA) stability on mechanical properties of a medium-carbon transformation-induced-plasticity (TRIP) steel at different deformation temperatures was studied. Two steels were obtained by adjusting the annealing temperature from 780 °C to 820 °C and controlling the isothermal bainitic process, and the carbon content of RA in the steels was 1.2% and 1.4%, respectively. At 25 °C, ultimate tensile strength, yield strength and total elongation of the steel after intercritical annealing at 780 °C were 1390 MPa, 870 MPa and 40%, respectively. When the deformation temperature increased to 200 °C, yield strength nearly kept constant (860 MPa) while total elongation significantly increased to 73%. The stability of RA had a significant influence on the deformation mechanisms of the steel, hence leading to the distinct variation of the mechanical properties. The RA stability increased with increasing deformation temperature to 200 °C, reducing the rate of transformation from RA to martensite and making the TRIP effect more persistently. Meanwhile, due to low solubility of Cu atom and the large number of dislocations acting as fast diffusion channels for Cu and C atoms in transformed martensite, the joint action of the increasing temperature and the continuous TRIP effect promoted the formation of numerous nanosized precipitates including η carbides and Cu particles in the newly formed martensite. As a result, the work hardening rate was significantly increased, improving the ductility without sacrificing the strength. This study provides a strategy to control the deformation mechanisms of medium-carbon TRIP steel, which can tailor the stability of RA according to the requirement of application, so as to obtain a good combination of strength and ductility.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Revolutionizing car body manufacturing using a united steel metallurgy concept10.1126/sciadv.abk0176 ↗
2. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
3. Experiments on heat generated during plastic deformation and stored energy for TRIP steels10.1016/j.matdes.2008.04.048 ↗
4. Stabilizing austenite via a core-shell structure in the medium Mn steels10.1016/j.scriptamat.2019.03.015 ↗
5. Effect of tempering and partitioning (T&P) treatment on microstructure and mechanical properties of a low-carbon low-alloy quenched and dynamically partitioned (Q-DP) steel10.1016/j.msea.2023.144968 ↗
6. High strength-high ductility combination in a low-density medium Mn steel prepared by a highly efficient route10.1016/j.jmrt.2023.12.020 ↗
7. Manganese controlled transformation and twinning of the nanoscale austenite in low-carbon-medium-Mn steel10.1016/j.msea.2021.142162 ↗
8. Carbon content-tuned martensite transformation in low-alloy TRIP steels10.1038/s41598-019-44105-6 ↗
9. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel10.1016/j.scriptamat.2012.11.003 ↗
10. Effect of ultra-fast heating on microstructure and mechanical properties of cold-rolled low-carbon low-alloy Q&P steels with different austenitizing temperature10.1016/j.matchar.2022.112086 ↗
11. Carbon and strain partitioning in a quenched and partitioned steel containing ferrite10.1016/j.actamat.2018.12.019 ↗
12. Joint investigation of strain partitioning and chemical partitioning in ferrite-containing TRIP-assisted steels10.1016/j.actamat.2019.12.050 ↗
13. Effect of matrix structures on TRIP effect and mechanical properties of low-C low-Si Al-added hot-rolled TRIP steels10.1016/j.msea.2019.138629 ↗
14. The dual role of TRIP effect on ductility and toughness of a medium Mn steel10.1016/j.actamat.2022.118629 ↗
15. Self-stabilization of untransformed austenite by hydrostatic pressure via martensitic transformation10.1016/j.actamat.2016.03.048 ↗
16. Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels10.1016/j.msea.2016.10.083 ↗
17. Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures10.1016/j.msea.2016.11.017 ↗
18. Improved work hardening of a medium carbon-TRIP steel by partial decomposition of retained austenite10.1016/j.msea.2020.140504 ↗
19. Microstructure and temperature-dependent mechanical behavior of hot-rolled TRIP-assisted microalloyed steel10.1016/j.matchar.2022.111804 ↗
20. Effect of intermediate temperature annealing on the stability of retained austenite and mechanical properties of medium Mn-TRIP steel10.1016/j.msea.2018.10.102 ↗
21. Effect of temperature and strain rate on dynamic properties of low silicon TRIP steel10.1016/S1006-706X(06)60061-7 ↗
22. Investigation of microstructural evolution and crack extension in a quenching and partitioning (Q & P) steel at different strain rates10.1016/j.jmrt.2023.03.149 ↗
23. Moderating strain hardening rate to produce high ductility and high strength in a medium carbon TRIP steel10.1080/21663831.2022.2116295 ↗
24. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
25. A mechanism for the strain-induced nucleation of martensitic transformations10.1016/0022-5088(72)90173-7 ↗
26. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels10.1016/S0921-5093(01)00965-0 ↗
27. Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content10.1016/j.actamat.2014.10.052 ↗
28. Dynamic strain aging mechanisms in a metastable austenitic stainless steel10.1016/j.actamat.2021.116888 ↗
29. Ductility and strain-induced transformation in a high-strength transformationInduced plasticity-aided dual-phase steel10.1007/BF02646127 ↗
30. Effect of deep cryogenic pretreatment on microstructure and mechanical properties of warm-deformed 7Mn steel after intercritical annealing10.1016/j.msea.2019.138202 ↗
31. Transforamtion behavior of TRIP steels10.1007/BF02659928 ↗
32. Improving the strength and ductility of medium Mn steel by depleting the stress-assisted martensite10.1016/j.scriptamat.2022.115267 ↗
33. Stress-assisted isothermal martensitic transforamtion: application to TRIP steels10.1007/BF02645934 ↗
34. Temperature and strain rate effects on the mechanical behavior of dual phase steel10.1016/j.msea.2015.03.019 ↗
35. Effects of Cu and Nb on martensite hardening and transformation-induced plastic deformation behavior of maraging TRIP-aided steel10.1016/j.jmrt.2023.04.035 ↗
36. Optimising the strength-ductility-toughness combination in ultra-high strength quenching and partitioning steels by tailoring martensite matrix and retained austenite10.1016/j.ijplas.2020.102851 ↗
37. Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM10.1016/j.actamat.2013.06.051 ↗
38. Experimental study of the γ-surface of austenitic stainless steels10.1016/j.actamat.2019.04.057 ↗
39. Effect of rolling temperature on microstructural characteristics and deformation mechanisms of a metastable austenitic stainless steel10.1002/srin.202200096 ↗
40. A general mechanism of martensitic nucleation: Part I. general concepts and the FCC→HCP transformation
41. Stacking fault energy of cryogenic austenitic steels10.1088/1009-1963/11/6/315 ↗
42. Understanding martensite and twin formation in austenitic steels: a model describing TRIP and TWIP effects10.1016/j.actamat.2017.02.004 ↗
43. Work hardening behavior of nanotwinned austenitic grains in a metastable austenitic stainless steel10.1016/j.scriptamat.2015.12.021 ↗
44. High stress twinnig in a compositionally complex steel of very high stacking fault energy10.1038/s41467-022-31315-2 ↗
45. Influence of banded ε-martensite and deformation twin on cryogenic toughness of Fe–Mn–xAl–C steel10.1016/j.jmrt.2023.09.255 ↗
46. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys10.1016/j.mattod.2020.09.029 ↗
47. Real-time nanoscale observation of deformation mechanism in CrCoNi-based medium- to high-entropy alloys at cryogenic temepratures10.1016/j.mattod.2019.03.001 ↗
48. Influence of the α–γ transformation of an irreversible Ni steel onto crystal orientation and tensile strength
49. Crystal structure and morphology of the carbide precipitated from martensitic high carbon steel during the first stage of tempering10.1016/0001-6160(72)90020-X ↗
50. Interface modification of tempered martensite utilizing nano-scale transformation carbide via isothermal sub-zero treatment10.1016/j.matlet.2018.08.047 ↗
51. Characterization of transformation carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques10.1016/j.actamat.2015.01.024 ↗
52. Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel10.1016/j.scriptamat.2016.04.027 ↗
53. Evolution of crystal structure of Cu precipitates in a low carbon steel10.1016/j.matdes.2017.08.054 ↗
54. High strength-superplasticity combination of ultrafine-grained ferritic steel: the significant role of nanoscale carbides10.1016/j.jmst.2020.11.078 ↗