journal article·2024-05Open access

Influence of multi-walled carbon nanotubes on thermal behaviour and mechanical properties of pineapple leaf fibre-based natural rubber composites

Yeo Yi Xuan, M.J.M. Ridzuan, M.S. Abdul Majid, M.T.A. Rahman, Ferriawan Yudhanto, Azduwin Khasri, Mohd Shihabudin Ismail

Abstract

Replacing synthetic fibres with natural fibres as reinforcement fillers in natural rubber (NR) tends to yield eco-friendly bio-composites. This study investigated the tensile and hardness properties, and the thermal behaviour of pineapple leaf fibre (PALF)-reinforced NR composites with and without the addition of multi-walled carbon nanotubes (MWCNT). The fibre content was varied at 0, 10, 20, and 30 parts per hundred rubber (phr) and the MWCNT content was fixed at 10 phr. The surface morphology of the tensile-fractured specimens was examined using scanning electron microscopy (SEM) to identify the rubber-matrix adhesion and tear mechanisms of the fibres in the NR matrix. The results revealed that including the PALF and MWCNT allowed the NR composites to exhibit excellent stretching stress at low elongations. Additionally, the composites displayed enhanced stiffness, further increasing the hardness of the composite, ranging from 46.8 to 62.8 Shore A. However, PALF reduces the thermal stability of the composite, where the initial degradation temperature increases. From the thermogravimetric analysis, the residues remaining in the NR composites ranged from 6-13% at various fibre loadings. Therefore, this study provides valuable insights into the tensile and hardness properties and the thermal behaviour of PALF-reinforced NR composites to improve end-use properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Nanocomposite Films for Food Packaging · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Eco-friendly bio-composites using natural rubber (NR) matrices and natural fiber reinforcements. Chemistry
2. Fabricating robust natural rubber composites with photothermal conversion and near-infrared light-actuated remote-controlled accurate self-healing10.1016/j.compscitech.2023.109966 ↗
3. A review of self-healable natural rubber based on reversible bonds: fundamental, design principle and performance10.1007/s10853-022-08062-2 ↗
4. Current trends in bio‐based elastomer materials10.1002/sus2.45 ↗
5. Transport mechanism and diffusion kinetics of kerosene through polynorbornene rubber/natural rubber blends10.1007/s00289-021-03770-2 ↗
6. Self-healing behavior of ethylene propylene diene rubbers based on ionic association10.1007/s10118-019-2241-0 ↗
7. Comparative study of vulcanization system on strain-induced crystallization of epoxidized natural rubber10.1016/j.polymer.2023.125911 ↗
8. Multi-functionality prospects in functionalized and pristine graphene nanosheets reinforced silicone rubber composites: a focused review10.1016/j.flatc.2023.100535 ↗
9. Fly ash as a potential filler for the rubber industry10.1016/B978-0-12-817686-3.00010-4 ↗
10. Industrial applications of natural fibre-reinforced polymer composites – challenges and opportunities10.1080/19397038.2018.1538267 ↗
11. A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites10.1016/j.rinma.2022.100355 ↗
12. A review on the limitations of natural fibres and natural fibre composites with emphasis on tensile strength using coir as a case study10.1007/s00289-022-04241-y ↗
13. Influence of microwave power and HDPE blend ratio on thermal and mechanical properties of kenaf reinforced PLLA/HDPE blended composites10.1007/s10965-022-03120-4 ↗
14. A state-of-the-art review focusing on the significant techniques for naturally available fibers as reinforcement in sustainable bio-composites: extraction, processing, purification, modification, as well as characterization study10.1016/j.rineng.2023.101511 ↗
15. Mechanical properties of Phormium tenax reinforced natural rubber composites10.3390/fib9020011 ↗
16. Application of plant fibers in environmental friendly composites for developed properties: a review10.1016/j.clema.2021.100032 ↗
17. Review: raw natural fiber–based polymer composites10.1080/1023666X.2014.880016 ↗
18. Amornsakchai · 2017 · vol. 1 · 289
19. High performance hybrid reinforcement of nitrile rubber using short pineapple leaf fiber and carbon black10.1016/j.polymertesting.2015.05.004 ↗
20. Remarkable improvement of failure strain of preferentially aligned short pineapple leaf fiber reinforced nitrile rubber composites with silica hybridization10.1016/j.polymertesting.2014.07.006 ↗
21. Performance evaluation of mechanical properties of nanofiller reinforced jute-kevlar hybrid composite10.1080/15440478.2020.1777246 ↗
22. Influence of fumed silica nanofiller and stacking sequence on interlaminar fracture behaviour of bidirectional jute-kevlar hybrid nanocomposite10.1016/j.polymertesting.2020.106898 ↗
23. Effect of modified nanographene oxide (mGO)/Carbon nanotubes (CNTs) hybrid filler on the cure, mechanical and swelling properties of silicone rubber composites
24. Properties of SBR/NR blend: the effects of carbon black/silica (CB/SiO2) hybrid filler and silane coupling agent10.1007/s12633-022-01675-x ↗
25. Improvement of mechanical and dynamic properties of high silica filled epoxide functionalized natural rubber10.1016/j.jmrt.2023.03.101 ↗
26. Silicone rubber composites reinforced by carbon nanofillers and their hybrids for various applications: a review10.3390/polym13142322 ↗
27. Enhanced adhesion friction behaviors of nature rubber composites by applications of carbon nanotube: experiment and molecular insight10.1016/j.triboint.2023.108333 ↗
28. Effect of carbon nanotubes content on the vulcanization kinetic in styrene–butadiene rubber compounds10.1002/pen.25063 ↗
29. Carbon nanotube based elastomer composites – an approach towards multifunctional materials10.1039/C4TC01037J ↗
30. Carbon nanotubes agglomeration in reinforced composites: a review10.3934/matersci.2019.5.756 ↗
31. Polymer grafted carbon nanotubes—synthesis, properties, and applications: a review10.1016/j.nanoso.2020.100429 ↗
32. Exploring the synergistic effect of short jute fiber and nanoclay on the mechanical, dynamic mechanical and thermal properties of natural rubber composites10.1016/j.polymertesting.2018.03.032 ↗
33. Effect of preparation methods and carbon black distribution on mechanical properties of short pineapple leaf fiber-carbon black reinforced natural rubber hybrid composites10.1016/j.polymertesting.2017.05.026 ↗
34. Effect of the processing on the resistance–strain response of multiwalled carbon nanotube/natural rubber composites for use in large deformation sensors10.3390/nano11071845 ↗
35. 2019
36. Effect of HAF carbon black on curing, mechanical, thermal and neutron shielding properties of natural rubber - low-density polyethylene composites10.1016/j.pnucene.2021.103940 ↗
37. Mechanical and thermal behavior of styrene butadiene rubber composites reinforced with silane-treated peanut shell powder10.1007/s00289-017-1931-4 ↗
38. Networking skills: the effect of graphene on the crosslinking of natural rubber nanocomposites with sulfur and peroxide systems10.3390/polym14204363 ↗
39. Improved heat dissipation of NR/SBR-Based tire tread compounds via hybrid fillers of multi-walled carbon nanotube and carbon black10.3390/polym15234503 ↗
40. Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites10.1016/j.matdes.2015.10.052 ↗
41. Horsetail (equisetum arvense) as a functional filler for natural rubber biocomposites10.3390/ma13112526 ↗
42. The rubber–filler interaction and reinforcement in styrene butadiene rubber/devulcanize natural rubber composites with silica–graphene oxide10.1002/pc.25076 ↗
43. Effect of surface treatments and filler loading on the properties of hemp fiber/natural rubber composites10.1007/s10570-019-02611-w ↗
44. Testing of rubber composites reinforced with carbon nanotubes10.3390/polym14153039 ↗
45. Natural rubber nanocomposites with functionalized carbon nanotubes: mechanical, dynamic mechanical, and morphology studies10.1002/app.35021 ↗
46. Preparation, morphology and properties of natural rubber composites filled with untreated short jute fibres10.1007/s00289-016-1744-x ↗
47. High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers10.1016/j.matdes.2014.01.071 ↗
48. Gamma attenuation and mechanical characteristics of a lead/NBR/SBR rubber composite with black nanocarbon reinforcement10.3390/su15032165 ↗
49. Properties Investigation of novel nitrile rubber composites with rockwool fibers
50. Influence of halloysite nanotubes on mechanical and swelling properties of silicone rubber compound10.1007/s10965-023-03632-7 ↗
51. RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: mechanical and piezoelectric actuation performance10.1016/j.nanoms.2020.12.002 ↗
52. Carbon nanotube-reinforced polymer nanocomposites for sustainable biomedical applications: a review
53. Multifunctional conductive graphite/cellulosic microfiber-natural rubber composite sponge with ultrasensitive collision-warning and fire-waring10.1016/j.cej.2021.134046 ↗
54. Characterization of crystalline cellulose of jute reinforced poly (vinyl alcohol) (PVA) biocomposite film for potential biomedical applications10.1007/s40204-014-0023-x ↗
55. Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: a review10.1016/j.indcrop.2017.07.027 ↗
56. Physical, mechanical and perforation resistance of natural-synthetic fiber interply laminate hybrid composites10.3390/polym14071322 ↗
57. Effect of fiber treatment on flexural properties of natural fiber reinforced composites: a review10.1016/j.ejpe.2017.11.005 ↗
58. Effects of benzoyl peroxide on some properties of composites based on hemp and natural rubber10.1007/s00289-014-1168-4 ↗
59. Effect of various surface treatments on the performance of jute fibers filled natural rubber (NR) composites10.3390/polym12020369 ↗
60. Natural rubber composites filled with cereals straw modified with acetic and maleic anhydride: preparation and properties10.1007/s10924-018-1285-5 ↗
61. Effects of compatibilizer type and fiber loading on mechanical properties and cure characteristics of sisal fiber/natural rubber composites10.1177/0021998313498790 ↗
62. Surface modified nanocellulose and its reinforcement in natural rubber matrix nanocomposites: a review10.3390/polym13193241 ↗
63. Mechanical properties of highly aligned short pineapple leaf fiber reinforced - nitrile rubber composite: effect of fiber content and Bonding Agent10.1016/j.polymertesting.2014.02.003 ↗
64. Mechanical properties of short‐isora‐fiber‐reinforced natural rubber composites: effects of fiber length, orientation, and loading; alkali treatment; and bonding agent10.1002/app.25065 ↗
65. Green composites from natural rubber and oil palm fiber: physical and mechanical properties10.1080/00914030600550505 ↗
66. A comprehensive review on the recent advancements in natural rubber nanocomposites10.1016/j.ijbiomac.2021.11.134 ↗
67. Physio-mechanical and wear properties of novel jute reinforced natural rubber based flexible composite10.1088/2053-1591/ab0164 ↗
68. Effect of surface treatment on flax fiber reinforced natural rubber green composite10.1002/app.53651 ↗