Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion
Source abstract
Abstract
Laser powder bed fusion (LPBF) additive manufactured high-strength aluminum alloys modified with Sc and Zr rare earth elements have wide prospects for lightweight and high-performance applications in aerospace industries. Nevertheless, driven by the target of achieving even higher performance, significant requirements are put forward for laser parameter optimization and resultant residual stress control for the laser additive manufactured parts. In this work, the thermal behavior, solidification behavior, and microstructure evolution of Al-Mg-Si-Mn-Sc-Zr aluminum alloy under various LPBF process parameters were carefully studied through simulations and experiments, and the evolution mechanisms of residual stress during LPBF were also revealed. The finite element simulation analysis showed distinct characteristics of temperature gradient ( G ) and solidification rate ( R ) within the molten pool. The top of the molten pool exhibited a higher G · R value (5.8-8.5 ×10 6 K/s) and a lower G / R value (0.9-2.1×10 7 K·s/m 2 ), contributing to the formation of fine equiaxed grains. The bottom displayed a lower G · R value (4.1-4.6 ×10 6 K/s) and a higher G / R value (1.5-5.1×10 7 K·s/m 2 ), facilitating the development of coarse columnar grains. As a higher laser power was applied, the simulation results indicated an increased temperature gradient in the molten pool, and the XRD analysis confirmed that the average residual stress increased from 85.9 to 169.7 MPa. The relationship between laser process parameters, molten pool morphology, grain distribution, and residual stress was established, demonstrating that the residual stress of Al-Mg-Si-Mn-Sc-Zr alloy could be tailored by optimizing laser process parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
3. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation
4. Amorphous alloy strengthened stainless steel manufactured by selective laser melting: enhanced strength and improved corrosion resistance10.1016/j.scriptamat.2018.01.016 ↗
5. Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting10.1016/j.msea.2018.04.087 ↗
6. Mechanical properties of SLM-printed aluminium alloys: a review10.3390/ma13194301 ↗
7. The origins for tensile properties of selective laser melted aluminium alloy A357
8. Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting10.1016/j.matdes.2016.03.053 ↗
9. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
10. Selective laser melting of Al-12Si alloy: enhanced densification via powder drying
11. The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al–Sc alloys10.1016/j.matdes.2012.06.019 ↗
12. Strengthening mechanisms of an Al-Mg-Sc-Zr alloy10.1016/S1359-6454(02)00258-6 ↗
13. Process and mechanical properties: applicability of a Scandium modified Al-alloy for laser additive manufacturing10.1016/j.phpro.2011.03.047 ↗
14. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
15. Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting10.1016/j.matdes.2019.107668 ↗
16. Temperature gradient induced tough-brittle transition behavior of a high-strength Al-4.2Mg-0.4Sc-0.2Zr alloy fabricated by laser powder bed fusion additive manufacturing
17. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges10.1063/1.4937809 ↗
18. Melt pool temperature and cooling rates in laser powder bed fusion
19. A review on modelling and simulation of laser additive manufacturing: heat transfer, microstructure evolutions and mechanical properties10.3390/coatings12091277 ↗
20. Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: a review
21. Selective laser melting of 304L stainless steel: role of volumetric energy density on the microstructure, texture and mechanical properties
22. Effect of support structures on Ti-6Al-4V overhang parts fabricated by powder bed fusion electron beam additive manufacturing10.1016/j.jmatprotec.2018.02.038 ↗
23. On the determination of residual stress and strain fields by sharp indentation testing. part i: theoretical and numerical analysis10.1016/S1359-6454(01)00122-7 ↗
24. On the determination of residual stress and strain fields by sharp indentation testing. part ii: experimental investigation10.1016/S1359-6454(01)00123-9 ↗
25. Thermal behavior and microstructure evolution mechanism of W-20%Fe alloy fabricated by laser metal deposition10.1016/j.ijmecsci.2020.105772 ↗
26. Simulation of melt pool behaviour during additive manufacturing: underlying physics and progress
27. Defect Formation mechanisms in selective laser melting: a review10.1007/s10033-017-0121-5 ↗
28. Scientific, technological and economic issues in metal printing and their solutions10.1038/s41563-019-0408-2 ↗
29. Metallurgy, mechanistic models and machine learning in metal printing10.1038/s41578-020-00236-1 ↗
30. Kou · 2003
31. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser10.1016/j.actamat.2020.03.060 ↗
32. Selective laser melting of rare earth element Sc modified aluminum alloy: thermodynamics of precipitation behavior and its influence on mechanical properties
33. Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy10.1080/17452759.2022.2036530 ↗
34. X-ray diffraction analysis by Williamson-Hall, Halder-Wagner and size-strain plot methods of CdSe nanoparticles- a comparative study10.1016/j.matchemphys.2019.122021 ↗
35. Estimating grain-size distributions in nanocrystalline materials from X-ray diffraction profile analysis10.1080/01418619808224072 ↗
36. Influence of scanning strategy and parameter on microstructural feature, residual stress and performance of Sc and Zr modified Al–Mg alloy produced by selective laser melting10.1016/j.msea.2020.139593 ↗
37. The effect of support structures on maraging steel MS1 parts fabricated by selective laser melting at different building angles10.1108/RPJ-11-2019-0287 ↗
38. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
39. Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting10.1016/j.msea.2017.11.063 ↗
40. Fabrication and heat treatment of high strength Al-Cu-Mg alloy processed using selective laser melting10.1117/12.2211362 ↗
41. Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles10.1016/j.actamat.2020.06.026 ↗
42. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment10.1016/j.msea.2017.06.089 ↗
43. Manipulating the microstructure and tensile properties of selective laser melted Al-Mg-Sc-Zr alloy through heat treatment10.1016/j.jallcom.2020.154773 ↗
44. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
45. Densification, microstructure and mechanical properties of an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy printed by selective laser melting10.1016/j.msea.2020.138931 ↗
46. Effect of Al3(Sc, Zr) and Mg2Si precipitates on microstructure and tensile properties of selective laser melted Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy10.1016/j.intermet.2020.106822 ↗
47. An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance10.1016/j.jmst.2020.06.036 ↗
48. A high strength Al–Li alloy produced by laser powder bed fusion: densification, microstructure, and mechanical properties