journal article·2022-05Open access

Titanium-modified plasma nitriding layer and enhanced properties for 42CrMo steel

Jiqiang Wu, Changjun Mao, Kunxia Wei, Jing Hu

Abstract

In order to obtain a nitriding layer with thicker ductile diffusion layer and thinner brittle compound layer, plasma nitriding with titanium addition was carried out at 540 °C for 4 h for 42CrMo steel, the characteristic of titanium modified nitriding layer and the enhanced properties were systematically investigated by optical microscope (OM), scanning electron microscope (SEM), XRD, hardness tester and wear tester etc. The results show that titanium addition can effectively modify the characteristics of nitrided layer, and thus a plasma nitrided layer owning thicker ductile diffusion layer and thinner brittle compound layer and higher surface hardness can be obtained. Titanium addition can significantly decrease the compound layer and increase the effective hardening layer, and also greatly enhance the surface hardness, especially with the optimal amount of 0.8 g, the compound layer can be reduced from 19 μm to 10 μm, while the effective hardening layer can be increased from 225 μm to 370 μm. And the surface hardness can be enhanced from 703HV0.05 to 889HV0.05, more importantly, both wear resistance and toughness can be greatly promoted by the novel titanium modified plasma nitrided layer, attributed to the formation of dispersedly distributed TiN particles with very high hardness in the nitriding layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Environmental and technical aspects of plasma nitrocarburising10.1016/S0042-207X(00)00250-5 ↗
2. The enhancement effect of salt bath preoxidation on salt bath nitriding for AISI 1045 steel10.1016/j.apsusc.2019.04.134 ↗
3. The effect of novel composite pretreatment on performances of plasma nitrided layer10.1016/j.jmrt.2020.06.070 ↗
4. A rapid D.C. plasma nitriding technology catalyzed by pre-oxidation for AISI4140 steel10.1016/j.matlet.2013.11.033 ↗
5. Performance enhancement by novel plasma boron-nitriding for 42CrMo4 steel10.1016/j.matlet.2021.130709 ↗
6. Enhancing heavy load wear resistance of AISI 4140 steel through the formation of a severely deformed compound-free nitrided surface layer10.1016/j.surfcoat.2018.09.066 ↗
7. Phase constitution control of plasma nitrided layer and its effect on wear behavior under different loads10.1016/j.surfcoat.2020.126403 ↗
8. A study of the effect of propane addition on plasma nitrocarburizing for AISI 1045 steel10.1016/j.vacuum.2014.08.015 ↗
9. Comparative study of plasma oxynitriding and plasma nitriding for AISI 4140 steel10.1016/j.jallcom.2016.04.172 ↗
10. Plasma nitriding without formation of compound layer for 38CrMoAl hydraulic plunger10.1016/j.vacuum.2017.05.036 ↗
11. XPS and ion scattering studies on compound formation and interfacial mixing in TiN/Ti nanolayers on plasma nitrided tool steel10.1016/j.surfcoat.2006.06.020 ↗
12. Surface hardening of age-hardenable Cu–Ti dilute alloys by plasma nitriding10.1016/j.surfcoat.2014.08.015 ↗
13. A novel titanium enhanced plasma nitriding for 42CrMo steel10.1016/j.matlet.2019.127052 ↗
14. A novel method for in-situ synthesized TiN coatings by plasma spray-physical vapor deposition10.1016/j.matlet.2018.01.068 ↗
15. The plasma nitriding treatment of TiN/TiCN multilayer films10.1016/j.apsusc.2012.12.058 ↗
16. Microstructure and wear resistance of in situ formed duplex coating fabricated by plasma nitriding Ti coated 2024 Al alloy10.1016/j.jmst.2013.10.032 ↗
17. An enhanced rapid plasma nitriding by laser shock peening10.1016/j.matlet.2018.08.010 ↗
18. Plasma nitridation of aluminized high purity iron
19. Low-temperature plasma nitriding of titanium layer on Ti/Al clad sheet10.1016/j.matdes.2012.11.029 ↗
20. Fabrication of TiN/cBN and TiC/diamond coated particles by titanium deposition process10.1016/S1003-6326(14)63502-0 ↗
21. Influence of plasma nitriding temperature on microstructures and mechanical properties of Ti-N/Ti-Al multilayer coatings on the surface of 5083 Al alloys10.1016/j.surfcoat.2017.12.031 ↗
22. Enhancement of wear resistance by sand blasting-assisted rapid plasma nitriding for 304 austenitic stainless steel10.1080/02670844.2019.1641953 ↗
23. Kinetics of titanium nitride synthesized with Ti and N210.1016/j.ijrmhm.2015.06.009 ↗
24. Wear resistance of TiN(Ti2N)/Ti composite layer formed on C17200 alloy by plasma surface Ti-alloying and nitriding10.1016/j.apsusc.2016.03.059 ↗
25. Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel10.1016/j.apsusc.2017.03.185 ↗