Interfacial gradient M7C3 carbides precipitation behavior and strengthening mechanisms of stainless steel/carbon steel clad plates
Source abstract
Abstract
The mechanical incompatibilities between ferrite and martensite at the cladding interface of stainless steel (SS)/carbon steel (CS) clad plates can result in stress concentration and interface cracks. In this paper, 304 SS/Q235 CS clad plates were prepared by liquid-solid (L-S) composite casting, and the mechanical incompatibilities between ferrite and martensite reduced by constructing gradient carbides in the interfacial ferrite. The precipitation behavior of the gradient carbides was analyzed, and the strengthening mechanism was revealed. The ultimate strength of the SS/CS clad plates was 370 MPa when stretched perpendicular to the cladding interface, and the SS/CS clad plates fractured in the CS that was far from the cladding interface. The interfacial microstructures from the CS to the SS were ferrite, M7C3 carbides, and lath martensite, and the carbides content gradually decreased toward the CS. During the L-S composite process, a micro-melting region with decreased volume fraction of interdendritic liquid to the CS formed at the cladding interface. The C, Cr, and Ni mixed and diffused in the interdendritic liquid, and the gradient distribution of elements resulted in the precipitation of coherent M7C3 carbides whose volume fraction decreased toward the CS. The coherent strengthening and precipitation strengthening of carbides strengthened the interfacial ferrite and resulted in a gradient strengthening, which reduced the mechanical incompatibilities between ferrite and martensite at the cladding interface. Additionally, the gradient carbides changed the stress state at the cladding interface and improved the interfacial bonding strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates10.1016/j.msea.2017.04.080 ↗
2. Enhanced interfacial strength and ductility of stainless steel/carbon steel laminated composite by heterogenous lamella structure10.1016/j.jmrt.2022.04.057 ↗
3. Microstructure and shearing strength of stainless steel/low carbon steel joints produced by resistance spot welding10.1016/j.jmrt.2022.08.041 ↗
4. Meso and microscale clad interface characteristics of hot-rolled stainless steel clad plate10.1016/j.matchar.2018.12.008 ↗
5. Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios10.1016/j.jallcom.2018.06.109 ↗
6. Interface characteristics and fracture behavior of hot rolled stainless steel clad plates with different vacuum degrees10.1016/j.apsusc.2018.08.221 ↗
7. Microstructural deformation pattern and mechanical behavior analyses of DP600 dual phase steel10.1016/j.msea.2014.02.016 ↗
8. In situ neutron diffraction in quantifying deformation behaviors of nano-sized carbide strengthened UFG ferritic steel10.1016/j.msea.2018.04.094 ↗
9. Study on the nucleation and growth of M23C6 carbides in a 10% Cr martensite ferritic steel after long-term aging10.1016/j.matchar.2015.11.023 ↗
10. Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels10.1016/j.actamat.2011.03.062 ↗
11. Annealing-induced grain refinement in a nanostructured ferritic steel10.1016/S1005-0302(12)60021-8 ↗
12. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
13. Strain-induced microstructure refinement in a tool steel subjected to surface mechanical attrition treatment10.1016/S1005-0302(10)60043-6 ↗
14. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
15. Micro/nano-structure leads to super strength and excellent plasticity in nanostructured 304 stainless steel10.1016/j.jmrt.2021.12.117 ↗
16. Nanoscale spheroidized cementite induced ultrahigh strength-ductility combination in innovatively processed ultrafine-grained low alloy medium-carbon steel10.1038/s41598-017-02920-9 ↗
17. High strength-superplasticity combination of ultrafine-grained ferritic steel: the significant role of nanoscale carbides10.1016/j.jmst.2020.11.078 ↗
18. The effect of temperature on the evolution of eutectic carbides and M7C3→M23C6 carbides reaction in the rapidly solidified Fe-Cr-C alloy10.1016/j.jallcom.2016.12.252 ↗
19. Growth and agglomeration behaviors of eutectic M7C3 carbide in electroslag remelted martensitic stainless steel[J]10.1016/j.jmrt.2021.01.113 ↗
20. A thermodynamic evaluation of the Fe-Cr-C system10.1007/BF02649276 ↗
21. Carbide reactions (M3C→M7C3→M23C6→M6C) during tempering of rapidly solidified high carbon Cr-W and Cr-Mo steels10.1007/BF02661203 ↗
22. Microstructure characterization and properties of carbon steel to stainless steel dissimilar metal joint made by friction welding10.1016/j.matdes.2015.07.068 ↗
23. Origin of hard and soft zone formation during cladding of austenitic/duplex stainless steel on plain carbon steel10.1179/026708301101510852 ↗
24. Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints10.1016/j.matdes.2010.12.011 ↗
25. (Fe, Cr)7C3/Fe surface gradient composite: microstructure, microhardness, and wear resistance10.1016/j.matchemphys.2014.06.026 ↗
26. Process window prediction of solid-liquid cast-rolling bonding (SLCRB) process through numerical analysis to fabricate bimetallic clad pipes10.1016/j.ijheatmasstransfer.2017.12.139 ↗
27. In situ observation on interfacial damages of 304L/533B explosive welded composite steel sheet under tensile loading
28. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals10.1007/s11661-011-0823-8 ↗
29. Experimental observation and crystallographic description of M7C3 carbide transformation in Fe-Cr-Ni-C HP type alloy10.1016/j.actamat.2015.08.056 ↗
30. Thermal expansion of iron carbides, Fe7C3 and Fe3C, at 297-911K determined by in situ X-ray diffraction10.1016/j.jallcom.2014.12.138 ↗
31. The Fe-rich corner of the metastable C-Cr-Fe liquidus surface10.1007/BF02663011 ↗
32. A thermodynamic assessment of the Fe-Cr-Ni-C system10.1007/BF02664985 ↗
33. 14: critical review of constitution of carbon - chromium - iron and carbon - iron - manganese systems10.1179/imr.1984.29.1.299 ↗
34. Effect of Ti additions on phase transitions, lattice misfit, coarsening, and hardening mechanisms in a Fe2AlV-strengthened ferritic alloy10.1016/j.jallcom.2019.07.288 ↗
35. Carbides refinement and mechanical properties improvement of H13 die steel by magnetic-controlled electroslag remelting10.1016/j.jmrt.2022.06.090 ↗
36. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
37. Revealing relationships between heterogeneous microstructure and strengthening mechanism of austenitic stainless steels fabricated by directed energy deposition (DED)10.1016/j.jmrt.2021.08.036 ↗
38. Nanosized precipitates activating ultrahigh strength of an ultrafine-grained ferritic steel during dynamic deformation10.1016/j.msea.2022.143040 ↗
39. Application of advanced experimental techniques to elucidate the strengthening mechanisms operating in microalloyed ferritic steels with interphase precipitation10.1016/j.actamat.2020.10.014 ↗
40. Relationship between microstructure and yield strength for plain carbon steel with ultrafine or fine (ferrite+cementite) structure10.1016/j.msea.2014.08.050 ↗