journal article·2023-07Open access

Optimizing multi-interlayered additive manufacturing for high strength robust joints in Inconel 718 and Ti–6Al–4V alloys

Chan Woong Park, Raj Narayan Hajra, Sung Hoon Kim, Se-Hwan Lee, Jeoung Han Kim

Abstract

The fabrication of a robust joint of Ti–6Al–4V and Inconel 718 is indispensable for numerous industries including aerospace, space, and biomedical industries, and to date not achieved without intermetallic compounds (IMCs) and microcracks. In this study, the additive manufacturing of a dissimilar functionally graded joint of Ti–6Al–4V and Inconel 718 alloy was achieved by employing V, Cr, and Ni multi-interlayers. Interlayer materials were carefully selected to mitigate the limitations of brittle IMC formation. Microstructure characterization, EBSD, and elemental analysis confirmed that all joints of Ti–6Al–4V/V, V/Cr, Cr/Ni, and Ni/Inconel 718 were crack and IMC-free, despite substantial elemental diffusion throughout the fabrication route. The as-built specimen exhibited a tensile strength of 210 MPa, which increased to 250 MPa after stress-relief heat treatment and is 40% higher than the reported tensile strength of 150 MPa for a laser welded Ti–6Al–4V/Inconel 718 specimen. The maximum hardness of the entire fabrication was 380 VHN, a typical solid-solution hardness value, indicating no detrimental brittle IMC formation. Furthermore, the finite elemental analysis predicted a moderate stress level of 90 MPa at the interface, indicating robust fabrication.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. A review on functionally graded materials and structures via additive manufacturing: from multi-scale design to versatile functional properties10.1002/admt.201900981 ↗
2. Functionally graded materials: a review of fabrication and properties10.1016/j.apmt.2016.10.001 ↗
3. Microstructural and weldability analysis of Inconel 617/AISI 310 stainless steel dissimilar welds10.1016/j.ijpvp.2016.05.004 ↗
4. Dissimilar welded joints operating in sub-zero temperature environment10.1007/s00170-016-8711-4 ↗
5. Microstructures and mechanical properties of multi-layered materials composed of Ti-6Al-4V, vanadium, and 17–4PH stainless steel produced by directed energy deposition
6. Influence of heat treatment on the microstructure and hardness of 17-4PH stainless steel fabricated through direct energy deposition10.1007/s12540-022-01333-2 ↗
7. Experimental investigation on laser directed energy deposition of functionally graded layers of Ni-Cr-B-Si and SS316L10.1016/j.optlastec.2019.105787 ↗
8. Controlling intermetallics formation at V-4Cr-4Ti/316SS laser-welded joint
9. Laser joining of NiTi to Ti6Al4V using a Niobium interlayer10.1016/j.actamat.2015.12.021 ↗
10. Investigation and joint effect analysis of Ti-6AL-4V & SS-304L in aerospace applications10.13111/2066-8201.2020.12.3.16 ↗
11. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
12. Alloy development by laser cladding: an overview10.2351/1.1340337 ↗
13. Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the International Thermonuclear Experimental Reactor components10.1016/j.jnucmat.2007.01.078 ↗
14. A study on the characteristics of laser deposition surface and cross-section for metal powder10.5781/JWJ.2016.34.4.17 ↗
15. Laser-based directed energy deposition (DED-LB) of advanced materials10.1016/j.msea.2022.142967 ↗
16. Laser deposition additive manufacturing of 17-4PH stainless steel on Ti-6Al-4V using V interlayer10.1080/21663831.2019.1596989 ↗
17. Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: experimental characterization and thermodynamic calculations10.1016/j.actamat.2016.12.070 ↗
18. Microstructural evolution and high temperature resistance of functionally graded material Ti-6Al-4V/Inconel 718 coated by directed energy deposition-laser10.1016/j.jallcom.2020.156255 ↗
19. Fabrication and characterization of a functionally graded material from Ti-6Al-4V to SS316 by laser metal deposition
20. Phase evolution in laser rapid forming of compositionally graded Ti–Ni alloys10.1115/1.3184028 ↗
21. Additive fabrication of 316L/Inconel 625/Ti6Al4V functionally graded materials by laser synchronous preheating10.1007/s00170-019-04061-x ↗
22. Additive manufacturing of Inconel 718 – Ti6Al4V bimetallic structures
23. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing10.1016/j.matdes.2016.05.016 ↗
24. Fabrication of aluminum/stainless steel bimetallic composites through a combination of additive manufacturing and vacuum-assisted melt infiltration casting10.1016/j.jmapro.2021.07.047 ↗
25. Microstructure development during dissimilar welding: case of laser welding of Ti with Ni involving intermetallic phase formation10.1007/s10853-006-6480-4 ↗
26. Dissimilar metal welding of Ti6Al4V and Inconel 718 through pulsed laser welding-induced eutectic reaction technology10.1007/s00170-018-1633-6 ↗
27. Dissimilar P-TIG welding between Inconel 718 and commercially pure Titanium using niobium interlayer10.1177/09544089221091388 ↗
28. Fiber laser welding of Ti–6Al–4V to Inconel 718 bimetallic structure via Cu/Ta multi-interlayer10.1016/j.vacuum.2021.110461 ↗
29. Microstructure and mechanical properties of laser welding of Ti6Al4V to Inconel 718 using Nb/Cu interlayer10.1016/j.jmatprotec.2019.116467 ↗
30. Development of nickel-titanium graded composition components10.1108/13552540510573383 ↗
31. Finite element modeling of residual stress at joint interface of titanium alloy and 17-4PH stainless steel10.3390/met11040629 ↗
32. Solidification behavior and the evolution of phase in laser rapid forming of graded Ti6Al4V-Rene88DT alloy10.1007/s11661-006-9021-5 ↗
33. Microstructure and phase evolution in laser rapid forming of a functionally graded Ti–Rene88DT alloy10.1016/j.actamat.2005.12.019 ↗
34. Influence of vanadium filler on the properties of titanium and steel TIG welded joints10.1016/j.jmatprotec.2016.06.018 ↗
35. Martínez Bastús · 2019
36. Jonsson · 2018
37. Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium Alloy for Surgical Implant Applications (UNS R56400) n.d. https://www.astm.org/f1472-20a.html (accessed October 23, 2022).
38. Marangoni convection and weld shape variation in A-TIG welding process10.1016/j.tafmec.2007.05.004 ↗
39. Tang · 2009 · 4791
40. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
41. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
42. Solid solution strengthening in multicomponent fcc and bcc alloys: analytical approach10.1016/j.pnsc.2020.11.006 ↗
43. A general formulation for solid solution hardening effect in multicomponent alloys10.1016/j.scriptamat.2016.09.009 ↗
44. Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys10.1016/j.jallcom.2013.08.176 ↗
45. Mechanical properties of refractory high-entropy alloys: experiments and modeling10.1016/j.jallcom.2016.11.188 ↗
46. Modelling of solid solution strengthening in multicomponent alloys10.1016/j.msea.2017.06.001 ↗
47. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
48. Solid-solution hardening of a high-Entropy AlTiVCrNbMo alloy10.1134/S0036029514040028 ↗
49. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
50. Tensile properties of the Cr–Fe–Ni–Mn non-equiatomic multicomponent alloys with different Cr contents10.1016/j.matdes.2015.08.007 ↗