Effect of cellular structure on the mechanical properties of 316L stainless steel fabricated by EBF3
Source abstract
Abstract
The cellular structure formed in additive manufactured 316L stainless steel (316L SS) plays a crucial role in achieving strength–ductility synergy. The cellular structure was also found in the 316L SS fabricated by electron beam freeform fabrication process (EBF3), and its microstructural characterization was analyzed. Interrupted tensile tests were carried out to demonstrate the effect of the cellular structure on the mechanical properties. The results showed that the microstructure of the as-deposited 316L SS consisted of the single austenite phase, and the enrichment of Cr and Mo elements was found in the cellular boundary. The orientation of the cellular structure and boundary was similar, and the obvious {100} preferred orientation was parallel to the building direction. The yield strength and fracture elongation of the as-deposited 316L SS parts were 316 MPa and 37.2%, respectively. Its ultimate tensile strength with a value of 632 MPa, was higher than that manufactured by conventional methods. The hardness and elastic modulus in the cellular interior were 2.88±0.11 GPa and 227.45±10.66 GPa, respectively. The cellular boundary had a higher hardness and a lower elastic modulus than the cellular interior. At the initial stage of tensile deformation, the cellular boundary deforms first due to its lower elastic modulus, causing the dislocation pileup and orientation change. The high dislocation density improved the slip resistance leading to the appearance of deformation twins after necking. The micron-dimples and nano-dimples formed in the fracture surface with the deformation of the cellular boundary and interior. Different from 316L SS fabricated by other additive manufacturing processes, the cellular structure improved the strain hardening capacity of the 316L SS fabricated by the EBF3 process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Effect of contaminations on the acoustic emissions during wire and arc additive manufacturing of 316L stainless steel
2. Electric current evaluation for process monitoring in electron beam directed energy deposition10.1016/j.ijmachtools.2022.103883 ↗
3. Transformation law of microstructure evolution and mechanical properties of electron beam freeform fabricated 321 austenitic stainless steel10.1016/j.vacuum.2021.110594 ↗
4. Microstructure and mechanical properties of Ti–6Al–4V alloy fabricated using electron beam freeform fabrication10.1016/j.vacuum.2019.06.030 ↗
5. Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication
6. Microstructure and mechanical properties of Ti-52 at% Al alloy synthesized in-situ via dual-wires electron beam freeform fabrication10.1016/j.msea.2020.140232 ↗
7. Solidification behavior and microstructure of Ti-(37−52) at% Al alloys synthesized in situ via dual-wire electron beam freeform fabrication
8. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing10.1016/j.msea.2017.05.024 ↗
9. Dynamic mechanical properties of 316L stainless steel fabricated by an additive manufacturing process10.1016/j.jmrt.2020.12.097 ↗
10. Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing10.1016/j.msea.2017.07.082 ↗
11. Characterization and mechanical properties of cladded stainless steel 316L with nuclear applications fabricated using electron beam melting10.1016/j.jnucmat.2018.04.026 ↗
12. Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: a comparative study bringing insights into the impact of microstructure on their passivity10.1016/j.corsci.2020.108914 ↗
13. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
14. On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: multiscale investigation10.1016/j.jmst.2019.09.017 ↗
15. Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting10.1016/j.matdes.2018.03.035 ↗
16. Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy10.1080/21663831.2019.1650131 ↗
17. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
18. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel
19. On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting10.1016/j.matchar.2018.12.032 ↗
20. Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel
21. About metastable cellular structure in additively manufactured austenitic stainless steels
22. Electron beam freeform fabrication of NiTi shape memory alloys: crystallography, martensitic transformation, and functional response10.1016/j.msea.2022.143135 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid10.1016/j.apsusc.2018.10.150 ↗
25. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts10.1016/j.matdes.2016.03.111 ↗
26. Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel10.1016/j.jmst.2021.10.006 ↗
27. Micro laser powder bed fusion of stainless steel 316L: cellular structure, grain characteristics, and mechanical properties10.1016/j.msea.2022.143345 ↗
28. Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel10.1016/j.msea.2018.10.051 ↗
29. Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel10.1016/j.msea.2019.02.078 ↗
30. Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel: segregation, partitioning and carbide precipitation10.1016/j.matdes.2017.11.055 ↗
31. Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr – 6 Ni – 2 Mo super martensitic stainless steel: thermodynamics versus experimental assessments10.1016/j.actamat.2019.05.026 ↗
32. Microstructure and mechanical properties of the laminated heterostructured material with 316L stainless steel/18Ni300 maraging steel fabricated by WAAM10.1016/j.msea.2023.145300 ↗
33. In-situ observation of asymmetrical deformation around inclusion in a heterogeneous additively manufactured 316L stainless steel10.1016/j.jmst.2021.02.022 ↗
34. Deformation-induced martensitic transformation in 316L stainless steels fabricated by laser powder bed fusion10.1016/j.matlet.2021.130377 ↗
35. Study on microstructure and tensile properties of 316L stainless steel fabricated by CMT wire and arc additive manufacturing10.1016/j.msea.2020.140006 ↗
36. Effect of heat treatment temperature on microstructure and tensile properties of austenitic stainless 316L using wire and arc additive manufacturing10.1016/j.msea.2021.142446 ↗
37. Subgrain microstructures and tensile properties of 316L stainless steel manufactured by selective laser melting10.1007/s42243-021-00561-x ↗
38. The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel10.1016/j.jmst.2019.11.025 ↗
39. Cellular size dependence on the strength of additively manufactured austenitic stainless steel10.1016/j.matlet.2020.128524 ↗
40. EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy10.1016/j.matchar.2018.04.035 ↗
41. Hetero-deformation-induced stress in additively manufactured 316L stainless steel10.1080/21663831.2020.1775149 ↗
42. Structural hierarchy defeats alloy cracking10.1126/science.abk1671 ↗