Microstructure effects on surface integrity in slot micro-milling multiphase titanium alloy Ti6Al4V
Source abstract
Abstract
Material microstructure in micro-cutting, such as the phase boundary for multiphase material, plays a dominant role in governing the surface integrity that strongly influences the fatigue life of micro-components with complex structures. In the present study, surface formation, subsurface deformation, and subsurface microstructure evolution for the machined surface were investigated by slot micro-milling multiphase titanium alloy Ti6Al4V in terms of chip morphology, burrs formation, surface roughness, surface defects, and subsurface deformation. In particular, the effect of β-Ti was considered in the study. The results show that the machined surface shows the obvious feed marks and adhesive materials accompanied by squeezed β-Ti, split β-Ti and plastic side flow β-Ti. The subsurface of the machined surface can be divided into the amorphous layer (around 24 nm), nanocrystalline layer (around 124 nm), elongated grain layer (around 197 nm), and bulk material. The deformation layer thickness of the β-Ti zone is larger than the α-Ti zone. In the deformation layer of the machined subsurface, the synergetic deformation between α-Ti and β-Ti can lead to the formation of a large number of nanocrystalline grains and some enlarged grains in the phase boundary of the α-Ti side, and the β-Ti side is full of elongated grains and sporadic dynamic recrystallization nanocrystalline. Our study enhances the understanding of the surface formation and subsurface formation mechanism in micro-milling Ti6Al4V, which can provide a theoretical basis and practical reference for achieving high surface integrity for polycrystalline or multiphase material by micro-milling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Titanium Alloys Microstructure and Properties · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Investigation on the burr formation mechanism in micro cutting10.1016/j.precisioneng.2016.08.004 ↗
2. Fluid mechanics of internal flow with friction and cutting strategies for micronozzles10.1016/j.ijmecsci.2015.06.011 ↗
3. Impact of deep cores surface topography generated by micro milling on the demolding force in micro injection molding10.1016/j.jmatprotec.2017.03.028 ↗
4. Calculation and analysis of quasi-dynamic cutting force and specific cutting energy in micro-milling Ti6Al4V
5. Surface integrity in material removal processes: recent advances10.1016/j.cirp.2011.05.002 ↗
6. Microstructure attributes and tool wear mechanisms during high-speed machining of Ti-6Al-4V10.1016/j.jmapro.2019.12.029 ↗
7. Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case10.1016/j.actamat.2019.08.059 ↗
8. Surface integrity and material removal mechanisms in high-speed grinding of Al/SiCp metal matrix composites10.1016/j.ijmachtools.2022.103906 ↗
9. Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining10.1016/j.msea.2016.08.076 ↗
10. Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy10.1016/j.apsusc.2013.11.111 ↗
11. Deformation behaviour and texture evolution of martensite steel subjected to hard milling10.1016/j.matchar.2019.109881 ↗
12. Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy10.1016/j.msea.2009.12.018 ↗
13. Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V10.1016/j.msea.2019.03.011 ↗
14. Quantitative characterization of machining-induced white layers in Ti–6Al–4V10.1016/j.msea.2019.138220 ↗
15. Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations
16. Material removal mechanism of multi-layer metal-film nanomilling10.1016/j.cirp.2022.03.040 ↗
17. Towards an understanding of grain boundary step in diamond cutting of polycrystalline copper10.1016/j.jmatprotec.2019.116400 ↗
18. Micro-milling machinability of pure molybdenum10.1007/s00170-019-03524-5 ↗
19. Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys10.1016/j.jmatprotec.2017.09.042 ↗
20. Microstructure and machinability evaluation in micro milling of selective laser melted Inconel 718 alloy10.1016/j.jmrt.2021.06.081 ↗
21. Surface generation analysis in micro end-milling considering the influences of grain10.1007/s00542-007-0478-y ↗
22. Modeling the material microstructure effects on the surface generation process in microendmilling of dual-phase materials10.1115/1.4006851 ↗
23. Microstructure evolution and grain refinement mechanism of rapidly solidified single-phase copper based alloys10.1016/j.jmst.2022.04.025 ↗
24. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals10.1016/j.ijmachtools.2021.103827 ↗
25. Dislocation evolution in nanoscratching the CVD diamond film: discrete dislocation dynamics simulation and experiments10.1557/s43579-021-00084-2 ↗
26. Chip formation during microscale cutting of a medium carbon steel10.1016/j.ijmachtools.2005.07.019 ↗
27. Formation of high density stacking faults in polycrystalline 3C-SiC by vibration-assisted diamond cutting10.1016/j.jeurceramsoc.2022.06.002 ↗
28. Towards understanding the machining mechanism of the atomic force microscopy tip-based nanomilling process
29. A numerical study on the material removal and phase transformation in the nanometric cutting of silicon10.1016/j.apsusc.2018.05.091 ↗
30. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
31. Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V10.1016/j.msea.2011.10.050 ↗
32. Amorphization by mechanical deformation
33. Thermal analysis of micro milling titanium alloy Ti–6Al–4V10.1016/j.jmatprotec.2015.10.019 ↗
34. Simulation of grain refinement induced by high-speed machining of OFHC copper using cellular automata method
35. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
36. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
37. Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy10.1016/j.matdes.2017.01.076 ↗
38. Stress-induced orientation relationship variation for phase transformation of α -Ti to β -Ti during high speed machining Ti-6Al-4V10.1016/j.msea.2017.02.098 ↗
39. Deformation induced face-centered cubic titanium and its twinning behavior in Ti–6Al–4V10.1016/j.scriptamat.2016.03.018 ↗
40. Face-centered titanium induced by ultrasonic surface rolling process in Ti-6Al-4V alloy and its tensile behavior10.1016/j.matchar.2018.09.004 ↗
41. Stress-induced hexagonal close-packed to face-centered cubic phase transformation in commercial-purity titanium under cryogenic plane-strain compression10.1016/j.scriptamat.2013.05.038 ↗
42. Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti6510.1016/j.jmst.2020.02.026 ↗
43. Microstructural evolution and formation mechanism of FCC titanium during heat treatment processing10.1016/j.jallcom.2012.10.083 ↗
44. Directional amorphization of covalently-bonded solids: a generalized deformation mechanism in extreme loading10.1016/j.mattod.2021.04.017 ↗
45. Structure response characteristics and surface nanocrystallization mechanism of alpha phase in Ti-6Al-4V subjected to high energy shot peening10.1016/j.jallcom.2018.09.343 ↗
46. The coordination behaviors of alpha and beta phases with different grain sizes in Ti-6Al-4V subjected to surface severe plastic deformation10.1016/j.msea.2018.12.112 ↗
47. Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 71810.1016/j.simpat.2020.102187 ↗
48. Prediction of surface residual stress after end milling based on cutting force and temperature10.1016/j.jmatprotec.2016.04.002 ↗