journal article·2023-09Open access

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Jian Liang, Zijuan Tang, Fang Qi, Weihui Jiang, Xinbin Lao, Lifeng Miao, Huidong Tang, Jianmin Liu, Zhenhong Bao

Abstract

Foam ceramics were prepared by using 80 wt.% sand shale, 8 wt.% coal fly ash, 8 wt.% steel slag and 4 wt.% magnesite as raw materials and 0.3 wt.% SiC as foam agent. Effects of firing temperature and holding time on performance and phases of foam ceramics were investigated. Grey system theory was used to explore the correlation between pore structure parameters and thermal conductivity. The foam ceramics sintered at 1160 °C for 50 min exhibit the optimal comprehensive properties: bulk density of 0.651 g/cm3, flexural strength of 4.75 MPa, total porosity of 73.58%, closed porosity of 54.16%, and thermal conductivity of 0.081 W/(m·K). The Micro-CT results show that the pores with the average pore volume of 1.083 mm3 are relatively independent and uniform; and the pore wall thickness presents a normal distribution, which is conducive to improving the properties. Among the pore structure parameters, the fractal dimension has the greatest correlation with the thermal conductivity of foam ceramics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Novel mullite ceramic foams with high porosity and strength using only fly ash hollow spheres as raw material10.1016/j.jeurceramsoc.2017.11.002 ↗
2. Improving the properties of ceramic foams by a vacuum infiltration process10.1016/j.jeurceramsoc.2010.06.003 ↗
3. Microstructure and gas permeation performance of porous silicon nitride ceramics with unidirectionally aligned channels10.1111/jace.17351 ↗
4. Processing and properties of advanced porous ceramics: an application based review10.1016/j.ceramint.2014.06.095 ↗
5. A novel approach to prepare high strength and high porosity reticulated porous ceramics by in-situ synthesis of mullite whiskers10.1016/j.ceramint.2021.02.036 ↗
6. Properties of ceramic foam catalyst supports: mass and heat transfer10.1016/S0926-860X(03)00287-4 ↗
7. Preparation and characterization of ceramic foam produced via polymeric foam replication method10.1016/j.jmatprotec.2007.12.099 ↗
8. Processing of porous ceramics by direct foaming: a review10.4191/kcers.2013.50.2.093 ↗
9. Preparation of high strength foam ceramics from sand shale and steel slag10.1016/j.ceramint.2019.12.179 ↗
10. Formation of closed-pore foam ceramic from granite scraps10.1016/j.ceramint.2017.10.180 ↗
11. Effects of magnesite addition on the properties and structure of foam ceramics10.1016/j.ceramint.2021.03.187 ↗
12. Preparation of ultra-light ceramic foams from waste glass and fly ash10.1080/17436753.2017.1342394 ↗
13. Using gold-silver tailings on the elaboration of ceramic foams10.1007/s40831-021-00365-z ↗
14. Preparation of nepheline-based ceramic foams from basalt tailing and black cotton soil10.1007/s12649-018-0514-4 ↗
15. Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent10.1016/j.ceramint.2018.02.211 ↗
16. Progressive utilisation prospects of coal fly ash: a review10.1016/j.scitotenv.2019.03.337 ↗
17. Preparation of glass ceramic foams for thermal insulation applications from coal fly ash and waste glass10.1016/j.conbuildmat.2016.02.183 ↗
18. A review of steel slag usage in construction industry for sustainable development10.1007/s10668-016-9759-x ↗
19. A review on steel slag valorisation via mineral carbonation10.1039/D1RE00035G ↗
20. New low-cost ceramic microfiltration membrane made from natural magnesite for industrial wastewater treatment10.1016/j.jece.2020.103906 ↗
21. Microstructures and strengths of microporous MgO-Al2O3 refractory aggregates using two types of magnesite10.1111/ijac.13619 ↗
22. Utilization of turmeric residue for the preparation of ceramic foam10.1016/j.jclepro.2020.123825 ↗
23. Unique microstructure and thermal insulation property of a novel waste-utilized foam ceramic10.1016/j.jmst.2020.03.017 ↗
24. Synthesis of in-situ mullite foam using waste rice husk ash derived sol by slip-casting route10.1016/j.ceramint.2020.01.099 ↗
25. Towards optimized pore structure to balance the thermal-mechanical performance of foamed ceramic
26. Novel ZrP2O7 ceramic foams with controllable structures and ultra-low thermal conductivity10.1016/j.jeurceramsoc.2021.07.004 ↗
27. Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings10.1016/j.jece.2022.108963 ↗
28. Optimization of process parameters in EDM using taguchi method with grey relational analysis and topsis for ceramic composites10.4028/www.scientific.net/JERA.22.83 ↗
29. Control problems of grey systems10.1016/S0167-6911(82)80025-X ↗
30. Product end-of-life options selection: grey relational analysis approach10.1080/00207540601043124 ↗
31. Correlations between pore structure parameters and gas permeability of corundum porous materials10.1111/jace.16861 ↗
32. Multi-criteria material selections and end-of-life product strategy: grey relational analysis approach10.1016/j.matdes.2006.02.016 ↗
33. Correlation between porosity characteristics and thermal conductivity of forsterite porous materials based on grey system theory
34. Volatility diagrams for silica, silicon nitride, and silicon carbide and their application to high-temperature decomposition and oxidation10.1111/j.1151-2916.1990.tb06677.x ↗
35. Tailoring pore structure and properties of waste-derived ceramic foams for lightweight construction10.1039/C9RA07818E ↗
36. Effects of flux components on the properties and pore structure of ceramic foams produced from coal bottom ash10.1016/j.ceramint.2019.03.190 ↗
37. Effect of the CaO content and decomposition of calcium-containing minerals on properties and microstructure of ceramic foams from fly ash10.1016/j.ceramint.2017.04.122 ↗
38. Preparation of sintered foamed ceramics derived entirely from coal fly ash10.1016/j.conbuildmat.2017.12.102 ↗
39. Novel glass ceramic foams materials based on red mud10.1016/j.ceramint.2013.11.128 ↗
40. Oxidation kinetics of silicon carbide crystals and ceramics: I, in dry oxygen
41. Preparation of ceramic foams from ceramic tile polishing waste and fly ash without added foaming agent10.1016/j.ceramint.2021.05.047 ↗
42. Quantitative relationship between microstructure and mechanical properties in Nd: YAG transparent ceramics10.1016/j.ceramint.2021.01.061 ↗
43. Pore surface fractal dimension of sol-gel-derived Al2O3-SiO2 membranes10.1016/S0167-577X(02)00712-7 ↗
44. Theory of transformation thermal convection for creeping flow in porous media: cloaking, concentrating, and camouflage10.1103/PhysRevE.97.022129 ↗
45. Novel applications of waste ceramics on the fabrication of foamed materials for exterior building walls insulation10.1016/j.conbuildmat.2018.05.290 ↗