Manufacturing and experimental characterization of new-developed natural fiber reinforced polymer nanocomposite
Source abstract
Abstract
In this work, a nanocomposite polymer is developed using less utilized palm leaf stalk fiber as natural reinforcement and nano coconut shell powder blended with polyester resin as a matrix. The fibers are extracted from palm leaves. The fibers are treated with 5% potassium permanganate (KMnO4) as an alkali for one hour. They are then thoroughly cleaned with water and dried in an oven. The fibers are chopped into short strands. The polyester matrix is pre-prepared by blending with coconut shell nanopowder. The fabrication of the composite is completed using these mats as reinforcement in the prepared blend. Mechanical tests are performed on the newly developed composites. The experimental findings are compared to similar natural fibers, and found that palm-based composite exhibits superior values. Structural electron microscopy observations reveal the presence of matrix, reinforcement and the absence of voids due to the addition of nanopowder. The developed composite may be recommended for automobile and aerospace applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Agarwal · 2015
2. A review on pineapple leaves fibre and its composites10.1155/2015/950567 ↗
3. Compressive and fracture toughness of natural and synthetic fiber-reinforced polymer
4. Effect of unmodified and modified nanocrystalline cellulose reinforced polylactic acid (PLA) polymer prepared by solvent casting method morphology, mechanical and thermal properties10.37358/MP.17.1.4793 ↗
5. Characterization of high glass transition temperature sugar-based epoxy resin composites with jute and carbon fiber reinforcement10.1016/j.compscitech.2015.06.001 ↗
6. Physicochemical and thermal properties of lignocellulosic fiber from Gigantochloa Scortechinii Bamboo: effect of steam explosion treatment10.1007/s12221-020-1022-2 ↗
7. Influence of fiber orientation on impact resistance behavior of woven sisal fiber reinforced polyester composite10.1155/2021/6669600 ↗
8. Mechanical performance of thermoplastic olefin composites reinforced with coir and sisal natural fibers: influence of surface pretreatment10.1002/pc.25209 ↗
9. Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites10.1016/j.jmrt.2019.11.086 ↗
10. Rheological and morphological properties of oil palm fiber-reinforced thermoplastic composites for fused deposition modeling (FDM)10.3390/polym13213739 ↗
11. Effect of chemical treatment on thermal, mechanical and degradation behavior of banana fiber reinforced polymer composites10.1080/15440478.2018.1550461 ↗
12. Mechanical properties of banana/kenaffiber-reinforced hybrid polyester composites: effect of woven fabric and random orientation10.1016/j.matdes.2014.10.067 ↗
13. Dynamic mechanical analysis of Silk and Glass (S/G/S)/Pineapple and Glass (P/G/P)/Flax and Glass (F/G/F) reinforced Lanneacoromandelica blender hybrid nanocomposites10.1016/j.jmrt.2021.09.068 ↗
14. A brief review on mechanical and thermal properties of banana fiber based hybrid composites
15. Wang · 2020 · 1498
16. Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers10.1007/s12221-017-7123-x ↗
17. Effect of silicon coupling grafted ferric oxide and E-glass fiber in thermal stability, wear and tensile fatigue behaviour of epoxy hybrid composite
18. Effect of short fibre orientation on the mechanical characterization of a composite material-hybrid fibre reinforced polymer matrix10.1007/s12034-019-1813-5 ↗
19. Ferreira · 2022
20. Investigations on chemical behaviours on mechanical properties of natural fiber Composites: an evaluation10.1016/j.matpr.2022.04.761 ↗
21. Effect of coconut shell nanopowder reinforcement in the development of palm fiber composites10.3389/fmats.2022.986011 ↗
22. Preparation and characterization of Silk/Bamboo/Glass nano polymer composites10.1016/j.matpr.2022.04.570 ↗
23. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw10.1007/s00107-020-01608-8 ↗
24. An artificial neural network and Taguchi prediction on wear characteristics of Kenaf–Kevlar fabric reinforced hybrid polyester composites
25. Suchart Mechanical and chemical properties evaluation of sheep wool fiber–reinforced vinylester and polyester composites10.1520/MPC20200036 ↗
26. Experimental investigations on thermal properties of coconut shell particles in DAP solution for use in green composite applications
27. Arif Study of flame retardant and mechanical properties of coconut shell particles filled composite
28. Characterization of the mechanical and thermal properties of rape short natural-fiber reinforced thermoplastic composites10.1007/s13726-021-00988-9 ↗
29. Experimental and numerical studies on the mechanical characterization of Epdm/S-sbr nano clay composites10.1088/1757-899X/912/5/052016 ↗
30. Advanced structural analysis of various composite materials with carbon nano-tubes for property enhancement10.1063/5.0019367 ↗
31. The mechanical characterization of carbon fiber reinforced epoxy with carbon nanotubes
32. Comparative numerical analyses of different carbon nanotubes added with carbon fiber–reinforced polymer composite, nanomaterials and nanocomposites: characterization, processing, and applications
33. Babak Safaei, and Mohammed Asmael Finite element analysis of natural fibers composites10.1515/ntrev-2020-0069 ↗
34. Amplitude-dependent damping characteristics of all-composite sandwich plates with a foam-filled hexagon honeycomb core10.1016/j.ymssp.2022.109845 ↗
35. Characterization of palm fibers for reinforcement in polymer matrix
36. 2nd International Conference on Condensed Matter and Applied Physics, (ICC 2017), Experimental testing and numerical simulation on natural composite for aerospace applications
37. The natural fiber polymer composites industry in europe technology and markets
38. Thermosetting polymer and nano clay based natural fiber bio- composites10.1016/j.mspro.2015.06.095 ↗
39. Experimental and computational structural cum fatigue data investigations on various lightweight materials under tensile load10.1063/5.0108365 ↗
40. Nature-inspired energy dissipation sandwich composites reinforced with high-friction graphene10.1016/j.compscitech.2023.109925 ↗
41. Recent developments in Luffa natural fiber composites: review10.3390/su12187683 ↗
42. Optimizations on various lightweight composite materials under complex load using advanced computational simulation
43. A novel battery thermal management system using nano-enhanced phase change materials10.1016/j.energy.2020.119564 ↗
44. Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics10.1016/j.energy.2021.120611 ↗
45. Mechanical and corrosion studies of friction stir welded nano Al2O3 reinforced Al-Mg matrix composites: RSM-ANN modelling approach10.3390/sym13040537 ↗
46. Role of ultrasonication duration and surfactant on characteristics of ZnO and CuONanofluids10.1088/2053-1591/ab5013 ↗
47. An overview on the effect of ultrasonication duration on different properties of nanofluids10.1007/s10973-018-7144-8 ↗
48. Back propagation modeling of shear stress and viscosity of aqueous ionic - MXeneNanofluids10.1007/s10973-021-10743-0 ↗
49. Human thermal comfort in passenger vehicles using an organic phase change material– an experimental investigation, neural network modelling, and optimization10.1016/j.buildenv.2020.107012 ↗
50. Experimental investigation of the friction stir weldability of AA8006 with zirconia particle reinforcement and optimized process parameters10.3390/ma14112782 ↗
51. Raja Dhas Parameter optimisation of fiber reinforced polymer composite by RSM design matrix10.1504/IJCAET.2021.117134 ↗
52. Tensile and hardness properties of banana/pineapple natural FiberReinforced hybrid composites
53. Synthesis and characterization of mechanical properties and wire cut EDM process parameters analysis in AZ6110.3390/ma14133689 ↗
54. Microstructure, mechanical properties, and corrosion behavior of boron carbide reinforced aluminum alloy (Al-Fe-Si-Zn-Cu) matrix composites produced via powder metallurgy route10.3390/ma14154315 ↗
55. Investigation of mechanical and physical properties of big sheep horn as an alternative biomaterial for structural applications10.3390/ma14144039 ↗
56. Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks10.3390/ma14112895 ↗
57. Experimental investigation of the friction stir weldability of AA8006 with zirconia particle reinforcement and optimized process parameters10.3390/ma14112782 ↗
58. Parameter study on friction surfacing of AISI316Ti stainless steel over EN8 carbon steel and its effect on coating dimensions and bond strength10.3390/ma14174967 ↗