journal article·2023-11Open access

A review on the preparation and characterization methods of spherical explosive crystals

Dongjie Liao, Minjie Li, Jiechao Wang, Minxue Zhang, Mianji Qiu, Chongwei An

Abstract

Spherical explosive crystals refer to explosives with a spherical morphology. Compared to polyhedral explosive crystals, spherical explosive crystals do not have sharp edges or corners, and have a lower probability of generating hot spots due to the edges and corners when subjected to friction and impact. Therefore, spherical explosive crystals have lower mechanical sensitivity and better safety. Moreover, the spherical morphology can endow explosive crystals with more excellent thermal properties, charging performance, energy output, and mechanical properties. Due to the significant improvement of the comprehensive performance of explosive crystals through crystal spheroidization, the research on explosive crystal spheroidization has received high attention from countries around the world. However, there are currently few review articles on the study of spheroidization of explosive crystals. In order to help people better carry out the research on spheroidization of explosive crystals, this article summarizes the current methods for preparing and characterizing spherical explosive crystals based on a systematic investigation of the spheroidization mechanism of explosive crystals, moreover analyzes the process characteristics and spheroidization effects. Finally, based on the current challenges in the study of spheroidization of explosive crystals, the development of spheroidization of explosive crystals is prospected, hoping to provide positive references for the preparation and application of spherical explosive crystals.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · Crystallization and Solubility Studies · Gold and Silver Nanoparticles Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Metal-organic framework templated synthesis of copper azide as the primary explosive with low electrostatic sensitivity and excellent Initiation Ability10.1002/adma.201601371 ↗
2. Interfacial engineering endowing energetic co-particles with high density and reduced sensitivity10.1016/j.cej.2020.124209 ↗
3. Fabrication of RDX, HMX and CL-20 based microcapsules via in situ polymerization of melamine–formaldehyde resins with reduced sensitivity10.1016/j.cej.2015.01.024 ↗
4. Recent advances on the crystallization engineering of energetic materials10.1016/j.enmf.2020.12.004 ↗
5. Solvent effects on the growth morphology and phase purity of CL-2010.1021/cg401774s ↗
6. Co-agglomerated crystals of 2,2′,4,4′,6,6′-hexanitro -stilbene/-azobenzene with attractive nitramines10.1016/j.cej.2022.141200 ↗
7. Constructing novel RDX with hierarchical structure via dye-assisted solvent induction and interfacial self-assembly10.1021/acs.cgd.9b01445 ↗
8. High-yielding and continuous fabrication of nanosized CL-20-based energetic cocrystals via electrospraying deposition10.1021/acs.cgd.7b01568 ↗
9. Construction of self-reinforced polymer based energetic composites with nano-energetic crystals to enhance mechanical properties10.1016/j.compositesa.2021.106604 ↗
10. Fabrication of micro/nano spherulitic hierarchical energetic materials via noncrystallographic branching induced by polymer additives: a case study of 2,2′,4,4′,6,6′-hexanitrostilbene (HNS)10.1016/j.cej.2023.142162 ↗
11. Membrane-cooling coupled crystallization with zero solvent discharge for spherical HMX: process design, growth kinetics and mechanism10.1016/j.cej.2023.144886 ↗
12. Occupancy model for predicting the crystal morphologies influenced by solvents and temperature, and its application to nitroamine explosives10.1021/cg301421e ↗
13. Fabrication of microspherical Hexanitrostilbene (HNS) with droplet microfluidic technology10.1016/j.powtec.2020.10.056 ↗
14. Fabrication and characterization of HMX@TPEE energetic microspheres with reduced sensitivity and superior toughness properties10.1016/j.compscitech.2017.02.017 ↗
15. Study on ultrasound assisted precipitation of CL-20 and its effect on morphology and sensitivity10.1016/j.jhazmat.2006.06.027 ↗
16. Preparation of HMX/TATB spherical composite explosive by droplet microfluidic technology10.1016/j.dt.2021.11.004 ↗
17. Uniform lactose microspheres with high crystallinity fabricated by micro-fluidic spray drying technology combined with post-treatment process10.1016/j.powtec.2021.07.059 ↗
18. Coupling oscillating swirling coflowing: a microfluidic strategy for superior safety and output performance of core–shell energetic microspheres10.1021/acs.iecr.2c02705 ↗
19. Microfluidic assisted 90% loading CL-20 spherical particles: enhancing self-sustaining combustion performance10.1016/j.dt.2021.12.004 ↗
20. Slow cook-off experiment and numerical simulation of spherical NQ-based melt-cast explosive10.3390/ma15072438 ↗
21. Molecular shape dominated crystal packing features of energetic materials10.1021/acs.cgd.0c01342 ↗
22. Fabrication and characterization of nanoenergetic hollow spherical hexanitrostibene (HNS) derivatives10.3390/nano8050336 ↗
23. Preparation, Thermal and sensitivity properties of nano‐sized spherical nitrocellulose composite crystal10.1002/prep.201900319 ↗
24. A method for the synthesis of tetranitroglycoluril from Imidazo- 4,5-d -imidazoles with loss of dinitrogen oxide10.1002/prep.201400041 ↗
25. Study on synthesis and characterization of primary explosive KDNBF with different morphologies10.1002/prep.202000052 ↗
26. Polymer-directed crystallization of HMX to construct nano-/microstructured aggregates with tunable polymorph and microstructure10.1039/D1CE01428E ↗
27. Preparation and properties of submicrometer sized LLM-105 via spray crystallization method10.1002/prep.201300174 ↗
28. Effect of modification of binary solvent molecules on ε-CL-20 crystal morphology: a molecular dynamics study10.1039/D1CE00003A ↗
29. Research progress and suggestion for the modification of the explosive crystal characteristics
30. A comprehensive review on polymer single crystals—from fundamental concepts to applications10.1016/j.progpolymsci.2017.11.006 ↗
31. Effects of additives on epsilon-HNIW crystal morphology and impact sensitivity10.1002/prep.201000014 ↗
32. Effect of amphiphilic additives on nucleation of hexahydro-1,3,5-trinitro-1,3,5-triazine10.1021/cg4006423 ↗
33. Effect of anionic carboxymethyl cellulose acetate butyrate on recrystallization and surface modification of energetic ion salt TKX-50 crystal10.1016/j.colsurfa.2022.128885 ↗
34. Crystal morphology modification of 5, 5′‐bisthiazole‐1,1′‐ dioxyhydroxyammonium salt10.1002/slct.201904492 ↗
35. Molecular dynamics simulation of β-HMX crystal morphology induced by polymer additives10.3390/cryst12020164 ↗
36. Spheroidal crystal morphology of RDX in mixed solvent systems predicted by molecular dynamics10.1016/j.jpcs.2019.109196 ↗
37. Thermodynamic analysis of pure and impurity doped pentaerythritol tetranitrate crystals grown at room temperature10.1007/s10973-006-8462-9 ↗
38. Preparation and characterization of spheroidized TKX-50
39. Borne · 2006
40. Chen · 2019
41. Shtukenberg · Chem Rev · 2012 · 112 · 180510.1021/cr200297f ↗
42. Gao · 2019
43. Growth and form of spherulites10.1103/PhysRevE.72.011605 ↗
44. Stabilization and spheroidization of ammonium nitrate: Co-crystallization with crown ethers and spherical crystallization by solvent screening10.1016/j.cej.2013.04.002 ↗
45. Rapid assembly and preparation of energetic microspheres LLM‐105/CL‐2010.1002/prep.201900389 ↗
46. Self‐assembly method for insensitive DAAF/FOX‐7 composite crystals with microspheres structure10.1002/crat.202000194 ↗
47. Rui · J Nanjing Univ Sci Technol (Nat Sci) · 1995 · 19 · 497
48. Study on the process of HMX recrystallization from nitric acid water
49. Study on the process of HMX spherulitic recrystallization from DMF-H2O
50. Micro-seeding and soft template effects on the control of polymorph and morphology of HMX micro particles in solvent-anti-solvent process10.1016/j.dt.2017.05.017 ↗
51. Influences of additives on HMX crystal morphology
52. Li · 2017
53. The facile fabrication and formation mechanism of self-assembled spherical 3,3′-diamino-4,4′-azoxyfurazan (DAAF) hierarchical structures10.1039/C9CE00930B ↗
54. Preparation of contained self-assembly spherical shell structure of 3,3'-diamino-4,4'-azofurazan and its thermal properties
55. Preparation of spherical nitroguanidine by solvent/non-solvent method
56. Study on preparation of insensitive and spherical high bulk density nitroguanidine with controllable particle size10.1002/prep.201500153 ↗
57. Engineering the morphology and particle size of high energetic compounds using drop-by-drop and drop-to-drop solvent–antisolvent interaction methods10.1021/acsomega.8b03214 ↗
58. A spherical FOX-7 crystal: preparation, characterization, solubility and thermodynamic study10.1080/07370652.2021.1912213 ↗
59. Process for spheroidization of HMX
60. Preparation of spherical HMX/DMF solvates, spherical HMX particles, and HMX@NTO composites: a way to reduce the sensitivity of HMX10.1021/acsomega.3c00606 ↗
61. Li · 2010
62. Cooling crystallization method for preparation of millimeter-scale spheroidized RDX
63. Particle size management studies on spherical 3-Nitro-1,2,4-triazol-5-one10.1002/ppsc.201100047 ↗
64. Effect of particle size and shape of NTO on micromeritic characteristics and its explosive formulations10.1016/j.powtec.2013.11.029 ↗
65. Morphology and structure of NTO spheroial crystals
66. Agglomeration of NTO on the surface of HMX particles in water-NMP solvent10.1002/crat.200710946 ↗
67. Optimal technical conditions of preparing spherical nitroguanidine by uniform design
68. A new way to synthesize spherical KDNBF
69. Recent developments in materials synthesis and processing using supercritical CO210.1002/1521-4095(200107)13:14<1111::AID-ADMA1111>3.0.CO;2-L ↗
70. Formation of energetic materials using supercritical fluids10.1002/1521-4087(200110)26:4<168::AID-PREP168>3.0.CO;2-X ↗
71. Formation of particles of explosives with supercritical fluids10.1002/prep.19970220313 ↗
72. Solvent effect on particle morphology in recrystallization of HMX (cyclotetramethylenetetranitramine) using supercritical carbon dioxide as anti-solvent10.1007/s11814-009-0187-6 ↗
73. Crystallization technique with supercritical fluids and its application research
74. Production and sensitivity evaluation of nanocrystalline RDX-based explosive compositions10.1002/prep.201000114 ↗
75. A successive and scalable process for preparing spherical submicrometer-sized RDX by the SEDS process10.1080/07370652.2013.829133 ↗
76. Preparation of submicron-sized RDX particles by rapid expansion of solution using compressed liquid dimethyl ether10.1016/j.supflu.2011.03.008 ↗
77. Asymmetrical flow field-flow fractionation for characterization of cyclotrimethylene trinitramine (RDX) particles prepared by supercritical anti-solvent recrystallization10.1007/s10337-012-2264-y ↗
78. Review of melt crystallization in the pharmaceutical field, towards crystal engineering and continuous process development10.1016/j.cherd.2020.12.012 ↗
79. Recent advances in melt crystallization, towards process intensification and technique development10.1039/D2CE00022A ↗
80. Crystallization of spherical ammonium dinitramide (ADN) particles10.1002/(SICI)1521-4087(200004)25:2<81::AID-PREP81>3.0.CO;2-F ↗
81. Energetic-material combustion experiments on propellant formulations containing prilled ammonium dinitramide10.1007/BF02701520 ↗
82. Preparation of spherical ammonium nitrate particles by melt spray10.1021/ie1006992 ↗
83. Micro nozzle assisted spraying process for re-crystallization of submicrometer hexanitrostilbene explosive10.1002/prep.201800008 ↗
84. Investigation of the crystallization of RDX during spray drying10.1016/j.powtec.2015.01.032 ↗
85. ANN model of preparation of energetic materials by spray drying10.1002/prep.202100086 ↗
86. Production of desensitized, ultrafine PETN powder10.1016/j.powtec.2021.10.042 ↗
87. Optimization of process for preparing spherical RDX by the spray drying method
88. Study on the influencing factors of ultrafine spherical RDX during spray drying with low speed10.1155/2019/7915129 ↗
89. Study on control of HNS spherical process
90. Preparation and performance of Nano HMX/TNT cocrystals10.1002/prep.201400175 ↗
91. Morphology and properties of CL-20/MTNP cocrystal prepared via facile spray drying10.1016/j.fpc.2022.10.002 ↗
92. Tunable continuous production of RDX from microns to nanoscale using polymeric additives10.1016/j.cej.2016.01.083 ↗
93. Fabrication of nano- and micron- sized spheres of CL-20 by electrospray10.22211/cejem/100682 ↗
94. Fabrication and properties of sphere CL-20/RDX composites with different molar ratios10.1080/07370652.2022.2120568 ↗
95. Preparation and characterization of superfine spherical TKX-50 with a hollow structure by spray drying10.1002/prep.202200308 ↗
96. Nozzle-Assisted Simultaneous precipitation method for energetic FOX-7/RDX composite microspheres with improved thermal stability and sensitivity10.1002/crat.202000015 ↗
97. Fabrication and characterization of submicron scale spherical RDX, HMX, and CL-20 without soft agglomeration10.1155/2019/7394762 ↗
98. A novel spherulitic self-assembly strategy for organic explosives: modifying the hydrogen bonds by polymeric additives in emulsion crystallization10.1021/acs.cgd.8b00044 ↗
99. A novel approach for preparation of CL-20 nanoparticles by microemulsion method10.1016/j.molliq.2013.12.028 ↗
100. Preparation of spherical particles of 1,1-diamino-2,2-dinitroethene (FOX-7) using a micellar nanoreactor10.1021/op200386u ↗