Material extrusion 3D printing of biodegradable composites reinforced with continuous flax fibers
Source abstract
Abstract
Fabricating additively manufactured thermoplastic parts with increased load-bearing capacity using material extrusion, namely fused deposition modeling, requires the incorporation of continuous reinforcing fibers. In this study, composites of PLA matrix and continuous flax fibers were additively fabricated using a specially designed 3D printer with multiple deposition toolheads. Unidirectional tensile and flexural specimens with a component-like shape and a fiber volume fraction of up to 18% were fabricated. The mechanical properties were determined for four different composite and matrix layers arrangements. The tensile modulus of elasticity and strength values increased by 3.6 and 2.9 times, respectively, compared to the specimens without the reinforcing fibers. In contrast, the flexural modulus of elasticity improved by 2.4 times, while the flexural strength increased by 1.4 times. It was found that it is possible to influence the mechanical properties and the type of damage by changing the volume fraction of the fibers and the arrangement of the composite layers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Crump · 1992 · US5121329A
2. The recent patent analysis and industrial trend of 3D printing10.17485/ijst/2015/v8iS8/64717 ↗
3. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection10.1016/j.matdes.2017.03.065 ↗
4. Effects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials10.1016/j.polymertesting.2020.106483 ↗
5. Effect of porosity on mechanical properties of 3D printed polymers: experiments and micromechanical modeling based on X-ray computed tomography analysis10.3390/polym11071154 ↗
6. Are we able to print components as strong as injection molded?—comparing the properties of 3D printed and injection molded components made from ABS thermoplastic10.3390/app11156946 ↗
7. A critical review on the fused deposition modeling of thermoplastic polymer composites10.1016/j.compositesb.2020.108336 ↗
8. Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: an additive review of contemporary and modern techniques for advanced materials manufacturing
9. Fused filament fabrication of fiber-reinforced polymers: a review
10. Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
11. A review of 3D/4D printing of poly-lactic acid composites with bio-derived reinforcements
12. 3D printing of natural fiber and composites: a state-of-the-art review10.1016/j.matdes.2022.111065 ↗
13. A review of 3D and 4D printing of natural fibre biocomposites10.1016/j.matdes.2020.108911 ↗
14. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation10.1038/srep23058 ↗
15. 3D printed continuous fiber reinforced composite lightweight structures: a review and outlook10.1016/j.compositesb.2022.110450 ↗
16. Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics10.1016/j.matdes.2017.10.021 ↗
17. A review on fibre reinforced composite printing via FFF10.1108/RPJ-01-2019-0004 ↗
18. 3D-printing of Continuous Fiber: a review of processes, materials and properties10.1080/25740881.2023.2222793 ↗
19. Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: a review and prospect10.1007/s12289-022-01667-7 ↗
20. Tensile performance of 3D-printed continuous fiber-reinforced nylon composites10.3390/jmmp5030068 ↗
21. Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions10.1016/j.compstruct.2021.115033 ↗
22. Experimental characterization and modeling of 3D printed continuous carbon fibers composites with different fiber orientation produced by FFF process10.3390/polym14030426 ↗
23. Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites10.1016/j.conbuildmat.2022.127842 ↗
24. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites10.1016/j.compositesa.2016.05.032 ↗
25. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
26. Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension10.1016/j.compscitech.2022.109269 ↗
27. Mechanical properties and shape memory effect of 4D printed cellular structure composite with a novel continuous fiber-reinforced printing path10.1016/j.matdes.2020.109303 ↗
28. Three-dimensional printing of biomimetic variable stiffness composites with controlled orientations and volume fraction of fibers
29. Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests10.1016/j.compscitech.2018.12.021 ↗
30. Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters10.1016/j.compositesb.2020.108474 ↗
31. 3D printing of continuous flax fibre reinforced biocomposites for structural applications10.1016/j.matdes.2019.107884 ↗
32. Multi-objective optimization for improving printing efficiency and mechanical properties of 3D-printed continuous plant fibre composites10.1016/j.coco.2022.101283 ↗
33. Fruleux · 2022
34. Efficient plant fibre yarn pre-treatment for 3D printed continuous flax fibre/poly(lactic) acid composites10.1016/j.compositesb.2021.109389 ↗
35. Tailoring interfacial properties of 3D-printed continuous natural fiber reinforced polypropylene composites through parameter optimization using machine learning methods
36. In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process10.1016/j.compositesa.2021.106725 ↗
37. Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites10.1016/j.compstruct.2022.116313 ↗
38. Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing10.1016/j.indcrop.2021.113760 ↗
39. Layup sequence and interfacial bonding of additively manufactured polymeric composite: a brief review10.1515/ntrev-2021-0116 ↗
40. Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication10.1016/j.compstruct.2018.09.014 ↗
41. Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: effect of process parameters on mechanical properties10.1016/j.compscitech.2019.107688 ↗
42. Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling10.1016/j.polymertesting.2018.04.038 ↗
43. Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology
44. Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces10.1007/s00170-022-10398-7 ↗
45. The effects of PLA color on material properties of 3-D printed components
46. Development and processing of continuous flax and carbon fiber-reinforced thermoplastic composites by a modified material extrusion process10.3390/ma14092332 ↗
47. 2019
48. 2021
49. 1998
50. 2009
51. Process optimization of continuous flax fiber/polylactic acid prepreg filaments toward high performance 3D ‐printed composites10.1002/pc.27559 ↗
52. On the fatigue properties of material extrusion 3D-printed biodegradable composites reinforced with continuous flax fibers10.1016/j.ijfatigue.2023.107954 ↗
53. Jones · 2022