Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel
Source abstract
Abstract
Acicular ferrite (AF) has been regarded as the optimal microstructure in steel welds and heat affect zones (HAZs), because of its superior combination of strength and toughness. Although various aspects of AF have been investigated, the crystallographic characteristics of AF, including orientation relationship, variant selection and variant pairing, are still not fully studied. In this research, a Ti-deoxidized high strength low alloy steel was prepared and subjected to HAZ thermal cycle simulation tests to attain AF microstructure. Optical micrographs were obtained and EBSD mappings of AF microstructures were conducted. Through crystallographic analysis, the orientation relationship between AF and austenite was found close to that of bainite transformed at a high temperature (580 °C). In the AF microstructure, all 24 variants are formed and variant selection is nearly random. Compared with bainite, the variant pairing of AF is more random despite the slight favour of certain variant pairs. Most of the adjacent AF laths are from different close-packed plane (CP) groups, leading to the classic interlocking morphology. Meanwhile, a large number of neighbouring AF laths belong to different Bain groups, resulting in a high density of high angle grain boundaries (HAGBs). Intragranular nucleation of primary AF laths on inclusions contributes both to the high HAGB density and to the interlocking morphology of AF, while the sympathetic nucleation of secondary AF laths only contributes to the latter. These results suggest that to increase the HAGB density in AF, promoting the intragranular nucleation on inclusions is more important than enhancing the sympathetic nucleation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. TiO2-Assisted microstructural variations in the weld metal of EH36 shipbuilding steel subject to high heat input submerged arc welding10.1007/s11663-022-02697-x ↗
2. Development of offshore steel for high heat input welding
3. High tensile strength steel plates with excellent HAZ toughness for shipbuilding: JFE EWEL technology for excellent quality in HAZ of high heat input welded joints
4. Microstructure and toughness of the CGHAZ of an offshore platform steel10.1016/j.jmatprotec.2014.12.017 ↗
5. Improving the toughness of heat affected zone of steel plate by use of fine inclusion particles10.1002/srin.201100046 ↗
6. Transition from bainite to acicular ferrite in reheated Fe–Cr–C weld deposits10.1179/026708390790189605 ↗
7. New insights into intragranular ferrite in a low-carbon low-alloy steel10.1016/j.actamat.2009.04.045 ↗
8. Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals10.1080/09507116.2014.921042 ↗
9. Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone10.1016/j.matchar.2010.04.004 ↗
10. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior10.1007/s11661-003-0010-7 ↗
11. In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C–Mn steel10.1016/j.actamat.2009.10.043 ↗
12. Bhadeshia · 1992
13. Improvement of HAZ toughness in HSLA steel by introducing finely dispersed Ti-oxide
14. Solid-state nucleation of acicular ferrite on minerals added to molten steel10.1016/S1359-6454(96)00187-5 ↗
15. Factors affecting the inclusion potency for acicular ferrite nucleation in high-strength steel welds10.1007/s11661-016-3456-0 ↗
16. Inclusion characteristics and acicular ferrite nucleation in Ti‐containing weld metals of X70 pipeline steel10.1002/srin.201700316 ↗
17. Crystal orientation relationships between acicular ferrite, oxide, and the austenite matrix10.2355/isijinternational.54.1690 ↗
18. Effects of Mn and Al on acicular ferrite formation in SAW weld metal10.2355/isijinternational.ISIJINT-2020-407 ↗
19. A study on the acicular ferrite formation in steel weld metals for gas metal arc welding10.2207/qjjws.38.6s ↗
20. Effects of Mg-Al-O-Mn-S inclusion on the nucleation of acicular ferrite in magnesium-containing low-carbon steel10.1016/j.matchar.2018.05.005 ↗
21. On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels10.2355/isijinternational.49.1063 ↗
22. Critical assessment 42: acicular ferrite formation and its influence on weld metal and heat-affected zone properties of steels10.1080/02670836.2022.2088163 ↗
23. The mechanism of acicular ferrite in weld deposits10.1016/j.cossms.2004.10.001 ↗
24. Acicular ferrite and bainite in C–Mn and low-alloy steel arc weld metals10.1080/13621718.2018.1461992 ↗
25. Orientation relationships between adjacent plates of acicular ferrite in steel weld deposits10.1179/mst.1989.5.1.93 ↗
26. Stress and the acicular ferrite transformation10.1016/0921-5093(92)90410-3 ↗
27. Crystallography and Interphase boundary of martensite and bainite in steels10.1007/s11661-017-4064-3 ↗
28. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
29. Variant selection in grain boundary nucleation of upper bainite10.1007/s11661-008-9510-9 ↗
30. Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel10.1016/j.actamat.2011.12.018 ↗
31. Mechanism of acicular ferrite formation in low carbon steel Ti-B weld metals with different oxygen levels10.2355/tetsutohagane.96.608 ↗
32. The application of welding heat cycle computer software10.4028/www.scientific.net/MSF.575-578.821 ↗
33. Mapping microstructure inhomogeneity using electron backscatter diffraction in 316L stainless steel subjected to hot plane strain compression tests10.1179/026708310X12688283410280 ↗
34. Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis10.1016/j.scriptamat.2009.02.053 ↗
35. X-ray investigation of the mechanism of the transformation from face centered cubic lattice to body centered cubic
36. Über den mechanismus der stahlhärtung10.1007/BF01397346 ↗
37. Crystallography of lath martensite in steels10.2320/matertrans1989.33.235 ↗
38. The mechanism of martensite formation10.1007/BF03398900 ↗
39. An in-situ microscopy study on nucleation and growth of acicular ferrite in Ti-Ca-Zr deoxidized low-carbon steel10.1016/j.matchar.2020.110381 ↗
40. Strangwood · 1987 · 209
41. Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel10.1016/j.actamat.2004.01.025 ↗
42. Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals10.1179/mst.1996.12.3.237 ↗
43. Inclusions nucleating intragranular polygonal ferrite and acicular ferrite in low alloyed carbon manganese steel welds10.1007/s12540-011-0425-4 ↗
44. Formation of acicular ferrite at oxide particles in steels10.1179/mst.1989.5.11.1057 ↗
45. In situ observation of morphological development for acicular ferrite in weld metal10.1179/174329306X149795 ↗
46. Three-dimensional morphology of ferrite formed in association with inclusions in low-carbon steel10.1016/j.matchar.2004.04.004 ↗
47. Effect of different strains on acicular ferrite and martensite-austenite islands in oxide metallurgy steel10.1016/j.jmrt.2022.05.154 ↗
48. Acicular ferrite morphologies in a medium-carbon microalloyed steel10.1007/s11661-001-0194-7 ↗
49. Crystallographic restriction in martensite and bainite transformations in steels