journal article·2024-01Open access

Enhanced formability of Al–Mg–Si–Zn alloy sheet via dislocation structure and texture during cold rolling

Kai-Xin Chen, Li-Zhen Yan, Yong-An Zhang, Xi-Wu Li, Zhi-Hui Li, Guan-Jun Gao, Hong-Wei Yan, Bai-Qing Xiong

Abstract

The effects of cold rolling deformation on microstructure, texture, and formability of Al–Mg–Si–Zn alloy were systematically investigated using OM, SEM, TEM, XRD, and tensile tests. The results indicated that the effect of cold rolling deformation on the recrystallized microstructure and texture of the sheets mainly depended on the differences in dislocation structure and texture distribution. With the increase of cold rolling deformation, the dislocation structure gradually changed from a mixture of density dislocation walls and microbands to a lamellar bands structure, the large-angle boundary gradually increased, and the size of dislocation cells gradually decreased, which indicated a gradual increase of the stored deformation energy. In addition, the deformation texture increased gradually with the raise of cold rolling deformation. After T4P treatment, the recrystallized grain size gradually reduced with the increase of cold rolling deformation. The main recrystallization textures in the sheets with 41 % and 55 % deformation were Cube {001}<100> and CubeRD {310}<001> textures, respectively. The CubeND {001}<310> texture was predominantly present in the sheets with 69 % and 82 % deformation, meanwhile some P {011}<233> texture was also observed in the sheets with 82 % deformation. It was found that the dislocation structure and deformation texture distribution formed in the sheet with 82 % cold rolling deformation contributed to smaller recrystallized grains and weaker P texture after solution heat treatment, which enhanced the average plastic strain ratio r value and improved the formability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components10.1016/j.ijlmm.2018.03.006 ↗
2. Comparative study of the application of steels and aluminium in lightweight production of automotive parts10.1016/j.ijlmm.2018.09.001 ↗
3. Renewable and sustainable materials in automotive industry10.1016/B978-0-12-803581-8.11461-4 ↗
4. Vehicle lightweighting energy use impacts in U.S. light-duty vehicle fleet10.1016/j.susmat.2016.04.001 ↗
5. Multi-criteria decision analysis framework for sustainable manufacturing in automotive industry10.1016/j.jclepro.2018.03.133 ↗
6. Recrystallization textures and plastic anisotropy in Al-Mg-Si sheet alloys10.4028/www.scientific.net/MSF.217-222.479 ↗
7. Effect of particle size distribution on the microstructure, texture, and mechanical properties of Al-Mg-Si-Cu alloy10.1007/s12613-018-1645-0 ↗
8. Synergy in hybrid multi-scale particles for the improved formability of Al-Zn-Mg-Cu alloys10.1016/j.jmrt.2020.12.068 ↗
9. Effect of deformation path on texture and tension properties of submicrocrystalline Al-Mg-Si alloy fabricated by differential speed rolling10.1016/j.matlet.2017.11.012 ↗
10. Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals—I. Description of rolling texture development in homogeneous CuZn alloys10.1016/0001-6160(88)90172-1 ↗
11. Evolution of the Brass texture in an Al-Cu-Mg alloy during hot rolling10.1016/j.jallcom.2016.08.322 ↗
12. Microstructure and texture variation of 6016 aluminum alloy during cold rolling
13. Effect of rolling geometry on the mechanical properties, microstructure and recrystallization texture of Al-Mg-Si alloys10.1007/s12613-015-1129-4 ↗
14. The dependence of microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloy sheet on final cold rolling deformation10.1016/j.jallcom.2015.10.070 ↗
15. Influence of different thermomechanical processes on the mechanical properties and microstructure of Al-Mg-Si-Cu alloy sheets
16. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
17. High angle boundaries formed by grain subdivision mechanisms10.1016/S1359-6454(97)00027-X ↗
18. Strain induced grain boundary migration in high purity aluminum10.1063/1.1699614 ↗
19. Microstructural and crystallographic aspects of conventional and asymmetric rolling processes10.1016/j.actamat.2008.01.042 ↗
20. Deep drawing characteristics of automotive aluminum alloys10.1016/S0921-5093(98)00845-4 ↗
21. Prediction of the limiting drawing ratio and the maximum drawing load in cup-drawing10.1016/0890-6955(95)00107-7 ↗
22. Strain hardening and substructural evolution in Ni-Co solid solutions at large strains10.1016/0921-5093(89)90627-8 ↗
23. Microstructural evolution in rolled aluminium10.1016/0921-5093(92)90002-I ↗
24. Modelling of plastic deformation via segmented voce curves, linked to characteristic LEDS's which are generated by LEDS transformations between work hardening stages10.1002/pssa.2211490110 ↗
25. Analysis of large dislocation populations in deformed metals10.1002/pssa.2211490111 ↗
26. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
27. Microstructure and local crystallography of cold rolled aluminium10.1016/0956-7151(94)00473-U ↗
28. Particle stimulated nucleation and the formation of rscrystallization texture in Al-Mn alloy containing particles Ⅱ. Interaction between Particles and Other Nucleation Sites and the Formation of Recrystallization Texture
29. Effect of particles on microstructural evolution during cold rolling of the aluminum alloy AA310410.1016/j.jallcom.2009.03.183 ↗
30. Bennett · 2008
31. A study of through-thickness texture gradients in rolled sheets10.1007/s11661-000-0146-7 ↗
32. Particle stimulated nucleation and the formation of recrystallization texture in Al-Mn alloy containing particles Ⅰ. Deformation Zones Around Particles and Particle Stimulated Nucleation
33. Extremely improved formability of Al-Zn-Mg-Cu alloys via micro-domain heterogeneous structure10.1016/j.msea.2022.142737 ↗
34. The formation of bimodal grain size distribution in Al-Mg-Si-Cu alloy and its effect on the formability10.1016/j.matchar.2017.08.013 ↗
35. Investigation of particles on the microstructure, texture and formability of Al-Mg-Si-Zn alloy for automotive body sheet10.1007/s10853-022-07716-5 ↗