Mechanical and microstructural responses in molybdenum-rhenium alloys under hot compressions
Source abstract
Abstract
To study temperature and rate-dependent behaviors of molybdenum-rhenium (Mo-Re) alloys, compressive tests at variable temperatures and strain rates were conducted. After the same machining and thermal annealing processes, fully recrystallization happens in Mo and Mo-Re alloys with low Re content (5 wt. %), while recovery occurs in Mo-Re alloys with high Re content (14 wt.% and 42 wt. %). The strength increases as Re content rises at all temperatures (300 °C, 600 °C and 1200 °C), meaning sufficient strengthening effect of Re. The rate-dependent behaviors, however, show different trends between Mo and Mo-Re alloys. Positive strain rate sensitivity is detected in Mo and low Re Mo-Re alloys in all temperatures, which is consistent to other research. While, near zero strain rate sensitivity is found in high Re Mo-Re alloys at 600 °C. Such an unusual phenomenon may be contributed to high stored dislocation density during mechanical processes. The stored dislocations are activated at a proper temperature to accommodate plastic flow, which weakens the influence of strain rate on strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Molybdenum alloys for high temperature applications in air, Powder Metal
2. Design of high-performance molybdenum alloys via doping metal oxide and carbide strengthening: a review
3. Mechanical properties and corrosion behavior in molten zinc of Mo-ZrO2 alloys10.1016/j.jmrt.2023.06.271 ↗
4. ZrTiO4 secondary phase effects on ductility and toughness of molybdenum alloys10.1016/j.matlet.2021.131077 ↗
5. A novel method for preparing ultrafine molybdenum-rhenium alloy powders10.1016/j.ijrmhm.2023.106429 ↗
6. Parametric optimization of multi-pass electron beam melting for molybdenum alloy containing 47.5 wt% rhenium10.1016/j.ijrmhm.2023.106193 ↗
7. A simpler technique for determining substitutional solute-screw dislocation interaction energies in bcc structures useful for estimating solid solution screw strengthening10.1016/j.actamat.2024.119820 ↗
8. Geach · 1956
9. Solid solution softening in bcc Mo alloys: effect of transition-metal additions on dislocation structure and mobility10.1103/PhysRevB.72.134107 ↗
10. Ductility and i MPact resistance of powder-metallurgical molybdenum-rhenium alloys10.1007/s11661-006-0177-9 ↗
11. Effect of rhenium content on microstructures and mechanical properties of electron beam welded TZM alloy joints10.1016/j.jmapro.2018.03.008 ↗
12. Mutual diffusion in cast and powder tungsten-rhenium and molybdenum-rhenium alloys
13. The low-temperature mechanical behavior of molybdenum-rhenium10.1007/s11837-003-0171-2 ↗
14. High-temperature mechanical properties and dynamic recrystallization of Mo-14Re alloy10.1016/j.matchar.2023.113617 ↗
15. Evaluating compressive property and hot deformation behavior of molybdenum alloy reinforced by nanoscale zirconia particles10.1016/j.jallcom.2020.158289 ↗
16. Microstructure and texture evolution of pure molybdenum during hot deformation10.1016/j.matchar.2019.110010 ↗
17. Hot compression behaviors and microstructural evolution of Mo-42wt%Re alloy for space nuclear power10.1016/j.matlet.2022.132252 ↗
18. Mechanical properties of ternary molybdenum-rhenium alloys at room temperature and 1700 K10.1016/j.scriptamat.2008.02.057 ↗
19. Quantifying primary recrystallization from EBSD maps of partially recrystallized states of an IF steel10.1016/j.matchar.2020.110773 ↗
20. A systematic study on thermo-mechanical behavior, processing maps and recrystallization mechanism of Incoloy825 superalloy during hot compression10.1016/j.jmrt.2024.01.042 ↗
21. Investigation of stress-strain response microstructure and texture of hot deformed pure molybdenum10.1016/j.ijrmhm.2018.02.011 ↗
22. Comparative study of the dynamic deformation of pure molybdenum at high strain rates and high temperatures
23. Grain size dependent strain rate sensitivity in nanocrystalline body-centered cubic metal thin films10.1016/j.msea.2014.04.080 ↗
24. Characterization of strengthening mechanism and hot deformation behavior of powder metallurgy molybdenum10.1016/j.matdes.2011.07.065 ↗
25. Orientation-dependent mechanical responses in molybdenum-rhenium alloys evaluated via micro-pillars
26. Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum10.1016/j.ijrmhm.2018.02.011 ↗