Formation mechanism of surface gradient microstructure and mechanical properties evolution of Mg–Y-Nd-Gd-Zr alloy by ultrasonic rolling
Source abstract
Abstract
The evolution mechanism of the microstructure and mechanical properties of a Mg-Y-Nd-Gd-Zr alloy subjected to different numbers of passes of the ultrasonic surface rolling process (USRP) was investigated. The results demonstrated an initial decrease followed by an increase in the surface roughness of the alloy. The optimal surface roughness was achieved after four passes, with a contour mean deviation of 0.06 μm and micro-roughness 10-point height of 0.55 μm. After the USRP, the alloy exhibited a composite gradient structure characterized by increased grain size and decreased dislocation, lamination, and twin densities. The depth of the gradient layer increased with each additional USRP pass, ranging from 650 μm (1 pass) to 910 μm (8 passes). Furthermore, the USRP treatment effectively enhanced the alloy strength; compared with the untreated samples; the yield strength increased by 34.2% in the gradient sample after one pass. No significant change was observed in the YS with an increasing number of rolling passes for Mg alloys, whereas both the tensile strength and elongation showed improvements. High-density twinning played a crucial role in enhancing the YS of the gradient samples without significant variation across different numbers of rolling passes, thus following a consistent pattern. The formation of more nanocrystals on the surface of Mg alloys after multiple rolling cycles is key to preventing premature fracture failure and improving the work-hardening rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
2. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
3. Dependence of tensile and compressive deformation behavior on aging precipitation in rolled ZK60 alloys10.1016/j.msea.2015.05.088 ↗
4. Magnesium: properties — applications — potential10.1016/S0921-5093(00)01351-4 ↗
5. Effect of Y and Gd content on the microstructure and mechanical properties of Mg–Y–RE alloys10.1016/j.jma.2019.03.002 ↗
6. The effect of homogenization on microstructures and mechanical properties of Mg–7Gd–3Y–1Nd–xZn–0.5Zr (x = 0.5, 1 and 2 wt.%) alloys10.1016/j.matchar.2015.08.013 ↗
7. Recent developments and applications on high-performance cast magnesium rare-earth alloys10.1016/j.jma.2020.06.021 ↗
8. Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel10.1016/j.surfcoat.2005.04.046 ↗
9. Improvement of high-temperature fatigue performance in the nickel-based alloy by LSP-induced surface nanocrystallization10.1016/j.jallcom.2018.01.070 ↗
10. High-strength GWZ1031K alloy with gradient structure induced by surface mechanical attrition treatment10.1016/j.matchar.2020.110701 ↗
11. Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment10.1016/j.actamat.2015.06.014 ↗
12. Atomic-scale dissecting the formation mechanism of gradient nanostructured layer on Mg alloy processed by a novel high-speed machining technique10.1016/j.jmst.2020.10.086 ↗
13. Effect of stacking faults in nanograins on the tensile properties of Mg–Y–Nd–Gd–Zr alloys subjected to ultrasonic surface rolling processing10.1016/j.surfcoat.2022.128305 ↗
14. Enhanced rolling contact fatigue behavior of selective electron beam melted Ti6Al4V using the ultrasonic surface rolling process10.1016/j.msea.2021.142352 ↗
15. Effect of ultrasonic surface rolling process on the surface properties of QAl10-3-1.5 aluminum bronze alloy10.1016/j.surfcoat.2022.128126 ↗
16. Effects of ultrasonic rolling on the surface integrity of in-situ TiB2/2024Al composite10.1016/j.jmatprotec.2021.117068 ↗
17. Surface integrity and wear behavior of 300M steel subjected to ultrasonic surface rolling process10.1016/j.surfcoat.2021.127380 ↗
18. Surface modification and its effect on the tensile and fatigue properties of 300M steel subjected to ultrasonic surface rolling process10.1016/j.surfcoat.2021.127566 ↗
19. Enhanced strength-ductility synergy in high-entropy alloys via architecting three-level gradient hierarchical nanostructure10.1016/j.msea.2023.145597 ↗
20. Achieving the synergistic of strength and ductility in Mg-15Gd-1Zn-0.4Zr alloy with hierarchical structure10.1016/j.jma.2023.01.002 ↗
21. Effect of twin assisted precipitation on the microstructure and mechanical properties of gradient structure Mg-Gd-Zn-Zr alloy10.1016/j.vacuum.2023.112162 ↗
22. Effect of a compound modification process on the microstructure and mechanical properties of ZK60 magnesium alloys10.1016/j.msea.2020.139117 ↗
23. Microstructures and mechanical properties of Mg-15Gd-1Zn-0.4Zr alloys treated by ultrasonic surface rolling process10.1016/j.msea.2021.141881 ↗
24. Cold rolling textures in AZ31 wrought magnesium alloy10.1016/j.scriptamat.2004.01.010 ↗
25. Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
26. Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys10.1016/j.scriptamat.2014.12.010 ↗
27. Aging effects on cyclic deformation and fatigue of extruded Mg–Gd–Y–Zr alloy10.1016/j.msea.2015.06.001 ↗
28. Effect of high-frequency dynamic characteristics in the ultrasonic surface rolling process on the surface properties10.1016/j.jmatprotec.2024.118353 ↗
29. Study on surface fretting friction properties of heat-treated HIP Ti-6Al-4 V alloy after heating-assisted ultrasonic surface strengthening10.1016/j.jmatprotec.2023.117942 ↗
30. Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
31. Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy10.1016/j.apsusc.2018.06.176 ↗
32. Contribution of extension twinning to plastic strain at low stress stage deformation of a Mg-3Al-1Zn alloy10.1016/j.msea.2017.10.038 ↗
33. The influence of surface pre-twinning on the friction and wear performance of an AZ31B Mg alloy10.1016/j.apsusc.2019.03.070 ↗
34. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
35. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum
36. Microstructure and tensile properties of as extruded and as aged Mg–Al–Zn–Mn–Sn alloy10.1179/1743284714Y.0000000676 ↗
37. Strain hardening behaviour and the Taylor factor of pure magnesium
38. Ascertaining the microstructural evolution and strengthening mechanisms of the gradient nanostructured pure titanium fabricated by ultrasonic surface rolling process10.1016/j.surfcoat.2023.130047 ↗
39. Effect of microstructure evolution on the mechanical properties of a Mg–Y–Nd–Zr alloy with a gradient nanostructure produced via ultrasonic surface rolling processing10.1016/j.jallcom.2022.166495 ↗
40. Dynamic recrystallization in nanocrystalline AZ31 Mg-alloy10.1016/j.vacuum.2017.06.023 ↗
41. Dynamic reerystallization of magnesium at ambient
42. Effect of dynamic recrystallization on texture orientation and grain refinement of Ti6Al4V titanium alloy subjected to laser shock peening10.1016/j.jallcom.2020.156672 ↗
43. Recrystallization of metals during hot deformation
44. Recent advances in hot working: fundamental dynamic softening mechanisms10.1007/BF02833651 ↗
45. Recent advances in micro-alloyed wrought magnesium alloys: theory and design10.1016/S1003-6326(22)65907-7 ↗
46. Constitutive analysis, twinning, recrystallization, and crack in fine-grained ZK61 Mg alloy during high strain rate compression over a wide range of temperatures10.1016/j.msea.2019.138649 ↗
47. Enhanced tensile and bending yield strengths of 304 stainless steel and H62 brass by surface spinning strengthening10.1016/j.msea.2019.03.113 ↗
48. Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening10.1016/j.matchar.2021.111179 ↗
49. Surface strengthening behaviors of four structural steels processed by surface spinning strengthening10.1016/j.msea.2017.08.007 ↗
50. Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation10.1016/j.msea.2017.04.005 ↗
51. Surface strengthening behaviors of pure Cu with heterogeneous microstructures10.1016/j.msea.2018.05.008 ↗
52. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing10.1016/j.apsusc.2008.06.034 ↗
53. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
54. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗