Analysis of the wear behavior and corrosion resistance of CoCrFeNiMn-2% CNTs laser cladding composite coating
Source abstract
Abstract
Carbon nanotubes (CNTs), as a kind of nanopowder, can be used as reinforcing powder to improve various properties of coatings because of their good self-lubricating properties and three-dimensional structure. However, CNTs are difficult to mix uniformly with other powders due to their easily disrupted microstructure and extremely low density. Therefore, CoCrFeNiMn HEA and 2 wt.% CNTs were mixed by a new mixing method—alcohol stirring and ball-less ball mill mixing methods. CoCrFeNiMn /2 wt.% CNTs coatings prepared by laser cladding (LC). The phase composition, microstructure, wear resistance, and corrosion resistance of the HEA/CNTs coating were analyzed by various characterization techniques. The results showed that grain refinement occurred in the coatings after adding CNTs, generating fine carbides. It was calculated that the densification percentage of the HEA/CNTs coating increased and the porosity decreased. Compared with the HEA coating, the microhardness of the HEA/CNTs coating increased by 101.66%, and the friction coefficient and wear rate of the HEA/CNTs coating were only 63.30% and 6.22% of the HEA coating. The more positive Ecorr and smaller Icorr indicated that the HEA/CNTs coating has better corrosion resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
3. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
4. Design of high entropy alloys: a single-parameter thermodynamic rule10.1016/j.scriptamat.2015.03.023 ↗
5. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
6. On the microstructure and erosion-corrosion resistance of AlCrFeCoNiCu high-entropy alloy via annealing treatment10.1080/02670836.2015.1116494 ↗
7. Oxidation behavior of the CrMnFeCoNi high-entropy alloy10.1007/s11085-016-9616-1 ↗
8. High thermal stability and sluggish crystallization kinetics of high-entropy bulk metallic glasses10.1063/1.4955060 ↗
9. Effect of aluminum content on plasma-nitrided AlxCoCrCuFeNi high-entropy alloys10.1007/s11661-009-9821-5 ↗
10. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
11. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
12. CoCrFeNi (W1− xMox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering10.1016/j.matdes.2016.12.076 ↗
13. Surface modification of CoCrFeNi high entropy alloy by low-temperature gaseous carburization10.1016/j.matlet.2020.128896 ↗
14. Effect of W Content on microstructure and properties of laser cladding CoCrFeNi HEA coating10.3390/coatings13081301 ↗
15. Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process10.1016/j.jmst.2021.10.001 ↗
16. Optimization of slip casting parameters for spark plasma sintering of transparent MgAl2O4/Si3N4 nanocomposite10.1016/j.ceramint.2019.07.055 ↗
17. Laser cladding process of Cobalt and Nickel based hard-micron-layers on 316L-stainless-steel-substrate10.1080/10426914.2019.1692354 ↗
18. Formation of TiCx during reactive spark plasma sintering of mechanically milled Ti/carbon nanotube mixtures10.1016/j.jallcom.2017.03.216 ↗
19. Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes10.1016/j.surfcoat.2022.128241 ↗
20. Microstructure and mechanical properties of spark plasma sintered AlCoFeMnNi high entropy alloy (HEA)-carbon nanotube (CNT) nanocomposite10.1016/j.jallcom.2020.158577 ↗
21. Hot corrosion behaviour of carbon nanotubes reinforced chromium oxide composite coatings at elevated temperature10.1088/2053-1591/aadc34 ↗
22. Microstructural homogenization and substantial improvement in corrosion resistance of mechanically alloyed FeCoCrNiCu high entropy alloys by incorporation of carbon nanotubes10.1016/j.mtla.2020.100917 ↗
23. Effect of carbon nanotube incorporation on the evolution of morphology, phase and compositional homogeneity, surface oxide chemistry and corrosion behaviour of electrodeposited FeCuMnNiCo-carbon nanotube composite coatings10.1016/j.electacta.2022.141639 ↗
24. Thermoelectric properties of Al-doped ZnO composite films with polymer nanoparticles prepared by pulsed laser deposition10.1016/j.compositesb.2019.02.043 ↗
25. Microstructure evolution, texture and laser surface HEACs of Al-Mg-Si alloy for light automobile parts10.1016/j.matchar.2019.110093 ↗
26. In-situ Fe2P reinforced bulk Cu–Fe immiscible alloy with nanotwinned Cu produced by selective laser melting10.1016/j.jallcom.2020.155592 ↗
27. Dispersion and damage of carbon nanotubes in carbon nanotube/7055Al composites during high-energy ball milling process10.1007/s40195-020-01138-5 ↗
28. J.L. Du, X. Xu, H.M. Zhang, M.W. Lu, J.F. Sun, K.Y. Luo, J.Z. Lu, Microstructure and Wear Resistance of CoCrFeNiMn Coatings Prepared by Extreme-High-Speed Laser Cladding[J] Available at: SSRN 4467028.
29. Effect of graphitization treatment on the structure of carbon nanotubes
30. Effect of Ni modified graphene on microstructure and properties of Ni60 composite coatings prepared by laser cladding10.1016/j.optlastec.2020.106756 ↗
31. On enhancing wear resistance of titanium alloys by laser cladded WC-Co composite coatings10.1016/j.ijrmhm.2022.105902 ↗
32. Microstructure and properties of laser cladding and CoCr2.5FeNi2Tix high-entropy alloy composite coatings
33. Microstructure and mechanical properties of spark plasma sintered nanocrystalline Ni3Al-xB (0.0< x< 1.5 at%) alloy10.1016/j.mtcomm.2018.09.002 ↗
34. Klug · 1954
35. A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding10.1016/j.optlastec.2021.106967 ↗
36. Electrogalvanization using new generation coatings with carbonaceous additives: progress and challenges10.1515/corrrev-2020-0035 ↗
37. Effect of WC content on microstructure and properties of CoCrFeNi HEA composite coating on 316L surface via laser cladding10.3390/ma16072706 ↗
38. A prismatic substructure formed during solidification of metals10.1139/p53-003 ↗
39. Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding10.1016/j.ijrmhm.2019.105044 ↗
40. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding10.1016/j.apsusc.2020.146085 ↗
41. Physico-mechanical, microstructure, and chemical properties of Si/Ti/Nb additions to CoCrMoW medium entropy alloys10.1016/j.jmrt.2023.05.198 ↗
42. Development of Fe-Co-Cr-Mn-Ni-C high entropy cast iron (HE cast iron) available for casting in air atmosphere10.1016/j.matdes.2019.108172 ↗
43. Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility10.1016/j.msea.2018.01.045 ↗
44. Effect of carbon nanotubes content on microstructure and properties of WC/Ni laser cladding coatings10.1080/02670844.2020.1812481 ↗
45. Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles
46. Microstructure and mechanical properties of graphene reinforced Fe50Mn30Co10Cr10 high-entropy alloy composites synthesized by MA and SPS10.1007/s00339-017-1151-7 ↗
47. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
48. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
49. Corrosion resistance and tribological behavior of FeCoCrNi@ GO/Ni high entropy alloy-based composite coatings prepared by electrodeposition10.1016/j.surfcoat.2024.130379 ↗
50. Improvement ductility and corrosion resistance of CoCrFeNi and AlCoCrFeNi HEAs by electroless copper technique10.1016/j.jmrt.2021.04.083 ↗
51. Effect of laser re-melting on geometry and mechanical properties of YCF102 cladding layer10.1016/j.surfcoat.2020.126789 ↗
52. Structure and properties of nickel-plated CNTs/Fe-based amorphous composite coatings fabricated by high-speed laser cladding10.1016/j.surfcoat.2022.128363 ↗
53. Effect of carbon nanotubes content on microstructure and properties of laser cladding nickel-based composite coatings
54. Structure and properties of nickel-plated CNTs/Fe-based amorphous composite coatings fabricated by high-speed laser cladding10.1016/j.surfcoat.2022.128363 ↗
55. Corrosion resistance of 13wt% Cr martensitic stainless steels: additively manufactured CX versus wrought ni-containing AISI 42010.1016/j.corsci.2021.109362 ↗
56. Pit growth kinetics of additively manufactured MoNi over-alloyed type 316L stainless steel10.1016/j.jmrt.2023.11.210 ↗
57. A comparative study on the critical pitting criteria of a super ferritic stainless steel at different temperatures in chloride or bromide solution10.1016/j.corsci.2021.109311 ↗
58. A comprehensive study of the pitting corrosion mechanism of lean duplex stainless steel grade 2404 aged at 475 C10.1016/j.corsci.2021.109738 ↗
59. Comparing corrosion behavior of additively manufactured Cr-rich stainless steel coating between conventional and extreme high-speed laser metal deposition10.1016/j.corsci.2021.109976 ↗
60. On the importance of the heat and mass transfer resistances in internally-cooled liquid desiccant dehumidifiers and regenerators10.1016/j.ijheatmasstransfer.2018.01.111 ↗
61. Laser-induced topology optimized amorphous nanostructure and corrosion electrochemistry of supersonically deposited Ni30Cr25Al15Co15Mo5Ti5Y5 HEA coating based on AIMD10.1016/j.jmst.2021.07.043 ↗
62. Synergistic improvement of wear and corrosion resistance of CoCrNiMoCB coatings obtained by laser cladding: role of Mo concentration10.1016/j.matdes.2022.110751 ↗
63. High-temperature oxidation behavior and corrosion resistance of in-situ TiC and Mo reinforced AlCoCrFeNi-based high entropy alloy coatings by laser cladding10.1016/j.ceramint.2022.11.198 ↗
64. Electrochemical polarization and passive film analysis of austenitic Fe–Mn–Al steels in aqueous solutions10.1016/S0010-938X(99)00017-7 ↗
65. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
66. Microstructure and corrosion behavior of FeCrNiCoMnx (x=1.0,0.6,0.3,0) high entropy alloys in 0.5M H2SO4