A review on progress trends of machining of Carbon Fiber Reinforced Plastics
Source abstract
Abstract
In contemporary manufacturing industries, composite materials such as carbon fiber reinforced plastics (CFRPs) have become indispensable, finding extensive applications in aerospace, automotive, shipbuilding, high-tech sports equipment, and more. The exceptional chemical, physical, and mechanical properties of CFRPs, including high corrosion resistance, superior strength-to-weight ratio, high fatigue strength, and oxidation resistance, make them highly sought after. However, these very advantages pose significant challenges during machining due to the abrasive nature of composites, anisotropic mechanical properties, and poor thermal conductivity, which collectively exacerbate tool wear. This review paper addresses the critical need for innovative solutions to improve the machinability of CFRPs, a subject of paramount importance for advancing manufacturing efficiency and product quality. It comprehensively examines the latest research progress, current practices, and emerging trends in machining techniques such as turning, drilling (including reaming and countersinking), milling and grinding. The review delves into the influence of various cutting conditions, environments, and tool geometries. It also examines tool textures, materials, and coatings. Additionally, advanced machining methods, including vibration, thermal, and hybrid-assisted machining, are discussed. These factors impact key performance metrics such as cutting forces and torques, tool wear and life, chip morphology, surface roughness, and the quality of machined surfaces, including defect analysis. By synthesizing a vast array of literature for the first time, this paper highlights the most effective strategies to enhance machinability while extending tool life and improving surface finish. Notably, it underscores the innovative use of dry and flood lubrication, minimum quantity lubrication, cryogenic lubrication, and high-pressure cooling. Additionally, it emphasizes optimizing cutting tool geometry, employing diamond tools, and coating tools with TiN and TiAlN, alongside the application of heat treatment and hybrid machining methods, particularly those incorporating vibration machining techniques. This review not only identifies the current challenges but also proposes cutting-edge solutions, making it an essential resource for researchers and practitioners aiming to push the boundaries of CFRP machining technology.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A self-healing carbon fibre reinforced polymer for aerospace applications10.1016/j.compositesa.2007.01.013 ↗
2. Fibre reinforced composites in aircraft construction10.1016/j.paerosci.2005.02.004 ↗
3. Lignin - an alternative precursor for sustainable and cost-effective automotive carbon fiber10.1016/j.jmrt.2015.03.004 ↗
4. Marine application of fiber reinforced composites: a review10.3390/jmse8010026 ↗
5. Analysis and development of the CFRP boring bar for stability improvement10.1007/s12221-023-00376-5 ↗
6. Carbon fiber reinforced plastic (CFRP) market by raw material (polyacrylonitrile (PAN), petroleum pitch, and others), resin type (thermosetting and thermoplastic), and application (aerospace & defense, wind turbine, automotive, sports equipment
7. Carbon fibres: production, properties and potential use10.13005/msri/140109 ↗
8. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials10.1016/j.dt.2018.02.001 ↗
9. A review on finite element method for machining of composite materials10.1016/j.compstruct.2017.06.012 ↗
10. A review of mechanical drilling for composite laminates10.1016/j.compstruct.2011.11.024 ↗
11. Delamination formation, evaluation and suppression during drilling of composite laminates: a review10.1016/j.compstruct.2019.02.099 ↗
12. A critical review of the drilling of CFRP composites: burr formation, characterisation and challenges10.1016/j.compositesb.2021.109155 ↗
13. Recent trends in drilling of carbon fiber reinforced polymers (CFRPs): a state-of-the-art review10.1016/j.jmapro.2021.07.029 ↗
14. Investigation on the cutting responses of CFRP/Ti stacks: with special emphasis on the effects of drilling sequences10.1016/j.compstruct.2020.112794 ↗
15. The mechanical characterization of carbon fiber reinforced epoxy with carbon nanotubes
16. Optimization of orientation of carbon fiber reinforced polymer based on structural analysis
17. Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites10.1016/S1359-835X(00)00068-3 ↗
18. Kaw · 2005
19. Nanofluids and their application in carbon fibre reinforced plastics: a review of properties, preparation, and usage10.1016/j.arabjc.2023.104908 ↗
20. Influence of the matrix material on the thermal properties of the short carbon fiber reinforced polymer composites manufactured by material extrusion10.1016/j.jmapro.2023.02.055 ↗
21. Damage monitoring of carbon fibre reinforced polymer composites using acoustic emission technique and deep learning10.1016/j.compstruct.2022.115629 ↗
22. Facile preparation, closed-loop recycling of multifunctional carbon fiber reinforced polymer composites10.1016/j.compositesb.2023.110677 ↗
23. Carbon fiber-reinforced polymers: modern materials in bridge engineering10.2749/101686692780617020 ↗
24. Carbon fiber reinforced polymer for cable structures—a review10.3390/polym7101501 ↗
25. The use of thermosets in aerospace applications10.1533/9780857097637.2.189 ↗
26. Structural analysis of aircraft fuselage splice joint
27. A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP)10.1007/s44245-023-00011-w ↗
28. Taladrado de materiales compuestos: problemas, prácticas recomendadas y técnicas avanzadas
29. Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs)10.1016/j.jmapro.2018.11.022 ↗
30. Energy saving by parametric optimization and advanced lubri-cooling techniques in the machining of composites and superalloys: a systematic review10.3390/en15218313 ↗
31. Advance monitoring of hole machining operations via intelligent measurement systems: a critical review and future trends10.1016/j.measurement.2022.111757 ↗
32. Study on cutting force and surface topography of peripheral milling CFRP10.1007/s40799-022-00575-4 ↗
33. Investigation on the interface damage in drilling low-stiffness CFRP/Ti stacks10.1016/j.cja.2019.04.017 ↗
34. Some constructive observations on the effect of wheel eccentricity during grinding of CFRP10.1016/j.jmapro.2023.04.066 ↗
35. Exit delamination at the material interface in drilling of CFRP/metal stack10.1016/j.jmapro.2022.11.058 ↗
36. Investigation of fracture mechanism evolution model for UD-CFRP and MD-CFRP during the milling process10.1016/j.compstruct.2022.116585 ↗
37. Damage evaluation of drilled carbon/epoxy laminates based on area assessment methods10.1016/j.compstruct.2012.08.003 ↗
38. Analytical study of delamination damage and delamination-free drilling method of CFRP composite10.1016/j.jmatprotec.2020.116665 ↗
39. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials10.1016/j.dt.2018.02.001 ↗
40. Surface grinding of carbon fiber reinforced plastic (CFRP) with an internal coolant supplied through grinding wheel10.1016/j.precisioneng.2014.04.005 ↗
41. Drilling of GFRP with liquid silicon rubber reinforced with fine aluminium powder on hole surface quality and tool wear using DOE10.1007/s40735-023-00771-8 ↗
42. Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability10.1007/s00170-017-0146-z ↗
43. Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC)10.1016/j.jmapro.2022.12.047 ↗
44. Tool wear mechanism in cutting of stack CFRP/UNS A9707510.3390/ma11081276 ↗
45. Ahmad · 2009
46. Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools10.1016/j.wear.2010.04.013 ↗
47. Tool wear prediction in milling CFRP with different fiber orientations based on multi-channel 1DCNN-LSTM
48. Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites10.1016/j.compstruct.2018.01.018 ↗
49. Structural optimization method of multitooth cutter for surface damages suppression in edge trimming of Carbon Fiber Reinforced Plastics10.1016/j.jmapro.2019.09.013 ↗
50. A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP)10.1016/j.compstruct.2016.08.004 ↗
51. Using nano-fluids minimum quantity lubrication (NF-MQL) to improve tool wear characteristics for efficient machining of CFRP/Ti6Al4V aeronautical structural composite10.3390/pr11051540 ↗
52. Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks10.1080/10426914.2019.1594275 ↗
53. The effect of MQL on tool wear progression in low-frequency vibration-assisted drilling of CFRP/Ti6Al4V stack material10.3390/jmmp5020050 ↗
54. Analysis of tool wear and hole delamination for large-diameter drilling of CFRP aircraft fuselage components: identifying performance improvement drivers and optimization opportunities10.3390/jmmp7020076 ↗
55. Chip formation studies in machining fibre reinforced polymer composites10.1504/IJMPT.2013.052790 ↗
56. Chip root analysis after machining carbon fiber reinforced plastics (CFRP) at different fiber orientations10.1016/j.procir.2014.03.013 ↗
57. Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites10.1016/j.jmapro.2011.09.005 ↗
58. Evaluation of the delamination factor for drilling of compact laminate composite material with tungsten carbide tools10.5505/pajes.2016.97992 ↗
59. Size effect of depth of cut on chip formation mechanism in machining of CFRP10.1016/j.compstruct.2016.11.044 ↗
60. CFRP drilling under throttle and evaporative cryogenic cooling and micro-lubrication10.1016/j.compstruct.2021.113916 ↗
61. The effects of cutting conditions and tool geometry on mechanics, tool wear and machined surface integrity when routing CFRP composites10.1016/j.jmapro.2021.01.011 ↗
62. Efficient analysis of CFRP cutting force and chip formation based on cutting force models under various cutting conditions
63. Chip Formation and orthogonal cutting optimisation of unidirectional carbon fibre composites10.3390/polym15081897 ↗
64. Specific machining forces and resultant force vectors for machining of reinforced plastics10.1016/j.cirp.2011.03.085 ↗
65. Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres10.1016/j.matdes.2013.08.087 ↗
66. Failure of delaminated interply hybrid composite plates under compression10.1016/S0266-3538(01)00048-3 ↗
67. The cutting process, chips, and cutting forces in machining CFRP10.1016/0010-4361(83)90157-X ↗
68. Machining of composite materials. Part I: traditional methods10.1016/0956-7143(92)90119-F ↗
69. Effect of tool geometry on surface roughness in slotting of CFRP10.1007/s00170-015-8185-9 ↗
70. The effect of tool structure and milling parameters on the milling quality of CFRP based on 3D surface roughness10.1007/s12541-023-00799-3 ↗
71. Analysis of characteristics of surface roughness of machined CFRP composites10.3311/PPme.14436 ↗
72. Investigation of the quality of Al-CFRP stacks when drilled using innovative approaches10.1016/j.cirpj.2023.04.011 ↗
73. Analytical study and experimental investigation on delamination in drilling of CFRP laminates using twist drills10.1016/j.tws.2021.107983 ↗
74. Effects of processing parameters on kerf characteristics and surface integrity following abrasive waterjet slotting of Ti6Al4V/CFRP stacks10.1016/j.jmapro.2019.04.024 ↗
75. Surface integrity and acoustic emission characteristics during slot milling 3D carbon/carbon composites using superabrasive diamond grinding point10.1016/j.diamond.2023.110166 ↗
76. An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures10.1016/j.jmrt.2022.12.054 ↗
77. Surface quality and burr characterization during drilling CFRP/Al stacks with acoustic emission monitoring10.1016/j.jmapro.2023.04.076 ↗
78. Edge trimming of carbon fibre reinforced plastic
79. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review10.1016/j.compositesa.2019.105552 ↗
80. Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates10.1007/s00170-017-0023-9 ↗
81. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates10.1016/j.compositesb.2012.01.007 ↗
82. On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies10.1016/j.compstruct.2019.111708 ↗
83. Damage behaviors of unidirectional CFRP in orthogonal cutting: a comparison between single- and multiple-pass strategies10.1016/j.compositesb.2020.107774 ↗
84. Kong L, Gao D, Lu Y, Jiang Z. Novel orbital drilling and reaming tool for machining holes in carbon fiber-reinforced plastic (CFRP) composite laminates n.d. https://doi.org/10.1007/s00170-020-05928-0/Published.
85. Trochoid milling of carbon fibre-reinforced plastics (CFRP)
86. Effect of the cutting speed on the cutting mechanism in machining CFRP10.1016/j.compstruct.2019.04.052 ↗
87. Size effect of depth of cut on chip formation mechanism in machining of CFRP10.1016/j.compstruct.2016.11.044 ↗
88. Quality monitoring and control for drilling of CFRP laminates10.1016/j.jmapro.2019.02.028 ↗
89. Asmael M, Safaei B, Zeeshan Q, Zargar O, Nuhu AA. Ultrasonic machining of carbon fiber-reinforced plastic composites: a review n.d. https://doi.org/10.1007/s00170-021-06722-2/Published.
90. Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling10.1007/s00170-019-04052-y ↗
91. Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study10.1016/S0261-3069(03)00062-1 ↗
92. Study on the surface quality of CFRP machined by micro-textured milling tools10.1016/j.jmapro.2018.11.021 ↗
93. Research on milling strategies to reduce delamination damage during machining of holes in CFRP/Ti stack10.1016/j.compstruct.2018.06.011 ↗
94. Machining quality and cutting force signal analysis in UD-CFRP milling under different fiber orientation10.1007/s00170-018-2312-3 ↗
95. Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates10.1016/j.compstruct.2019.111441 ↗
96. Sheikh-Ahmad J, Almaskari F, El-Hofy M. Characterization of the cutting forces and friction behavior in machining UD-CFRP using slot milling test n.d. https://doi.org/10.1007/s00170-020-06544-8/Published.
97. Wear analysis of cryogenic treatment cutting tool insert in turning of glass fiber reinforced plastics10.1063/5.0108237 ↗
98. Surface morphology characterization of unidirectional carbon fibre reinforced plastic machined by peripheral milling10.1016/j.cja.2021.04.024 ↗
99. Machining of long ceramic fibre reinforced metal matrix composites – how could temperature influence the cutting mechanisms?10.1016/j.ijmachtools.2023.103994 ↗
100. Performance and mechanism evaluation during milling of CFRP laminates under cryogenic-based conditions10.1016/j.compstruct.2021.114578 ↗