Progress of highly conductive Graphene-reinforced Copper matrix composites: A review
Source abstract
Abstract
Enhancing the electrical conductivity of metals remains a critical challenge, as it directly determines the transmission efficiency of power electronic systems. Graphene-reinforced metal matrix composites have garnered widespread attention due to their exceptional electrical conductivity and low-temperature coefficient of resistance. This review thoroughly examines the intrinsic physical properties of Graphene and Cu, identifying specific obstacles in developing highly conductive composite materials. Despite the weak van der Waals interactions between Graphene and Cu, the work principle and interaction mechanism between Cu and Graphene are elucidated. The primary focus of this review is to explore methods for enhancing the electrical conductivity of Cu/Graphene composites through different design strategies and processing techniques. The more complex and critical factors encompass the quality of raw materials, processing techniques, dimensional precision, crystallographic orientation, and the interfacial properties between Graphene and Cu. The perspectives on the research gap and further development trends of Cu/Graphene composites are also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Continuous patterning of copper nanowire-based transparent conducting electrodes for use in flexible electronic applications10.1021/acsnano.6b03626 ↗
2. Age-hardening structure and mechanism of Cu-3at%Ni-1.5 at%Si corson alloy10.1016/j.msea.2021.142220 ↗
3. Effect of large deformation on microstructure and properties of copper alloy wire10.1016/j.jmrt.2024.02.153 ↗
4. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite10.1021/acsnano.5b01067 ↗
5. Quantitative mechanisms behind the synchronous increase of strength and electrical conductivity of cold-drawing oxygen-free Cu wires10.1016/j.jallcom.2021.158759 ↗
6. Change in microstructures and mechanical properties during deep wire drawing of copper10.1016/j.msea.2010.05.057 ↗
7. Enhancing strength and electrical conductivity of Cu-Cr composite wire by two-stage rotary swaging and aging treatments10.1016/j.compositesb.2021.109567 ↗
8. Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: a review10.1016/j.pmatsci.2023.101141 ↗
9. Electrical resistivity due to dislocations in highly purified copper10.1103/PhysRevB.32.2149 ↗
10. Properties and precipitates of the high strength and electrical conductivity Cu-Ni-Co-Si-Cr alloy10.1016/j.jmst.2021.03.049 ↗
11. Modeling the electrical resistivity of deformation processed metal-metal composites10.1016/j.actamat.2014.06.013 ↗
12. Single-crystallization of electrolytic copper foils10.1016/j.jmst.2023.07.039 ↗
13. Crossing the limits of electric conductivity of copper by inducing nanotwinning via extreme plastic deformation at cryogenic conditions10.1016/j.matchar.2023.113513 ↗
14. Microstructure evolution of high-strength and ultra-high-conductivity microfilament wire prepared by continuous deformation of single-crystal copper10.1007/s10853-022-07919-w ↗
15. High strength and high conductivity Cu alloys: a review10.1007/s11431-020-1633-8 ↗
16. Microstructural design of new high conductivity-high strength Cu-based alloy10.1016/j.jallcom.2015.01.234 ↗
17. Carbon nanotube-and graphene-based nanomaterials and applications in high-voltage supercapacitor: a review10.1016/j.carbon.2018.10.010 ↗
18. Composites with carbon nanotubes and graphene: an outlook10.1126/science.aat7439 ↗
19. Mechanisms for high strength and ultra-high electrical conductivity of Cu-3.5wt.%Ag alloy prepared by thermomechanical treatment
20. Microstructure and properties of high strength and high conductivity Cu-0.4Mg alloy processed by upward continuous casting and multi-pass drawing
21. Microstructural design of new high conductivity high strength Cu-based alloy10.1016/j.jallcom.2015.01.234 ↗
22. High strength and high electrical conductivity CuMg alloy prepared by cryorolling10.1016/S1003-6326(19)64968-X ↗
23. Development and performance analysis of novel in situ Cu-Ni/Al2O3 nanocomposites10.1016/j.ceramint.2022.01.287 ↗
24. Effect of texture and microstructure on properties of electrodeposited Cu-SiO2 and Cu-Y2O3 coatings10.1016/j.surfcoat.2017.02.035 ↗
25. Reforming nanostructured Cu-Ag alloy to improve ductility and electrical conductivity10.1016/j.msea.2023.144997 ↗
26. Exceptional ballistic transport in epitaxial graphene nanoribbons10.1038/nature12952 ↗
27. Graphene defect engineering for optimizing the interface and mechanical properties of graphene/copper composites10.1016/j.carbon.2018.08.004 ↗
28. Enhanced electrical conductivity in graphene-copper multilayer composite10.1063/5.0073879 ↗
29. A review of graphene reinforced Cu matrix composites for thermal management of smart electronics
30. Metal-graphene interfaces in epitaxial and bulk systems: a review10.1016/j.pmatsci.2020.100652 ↗
31. Effect of reduced graphene oxide nanoplatelets content on the mechanical and electrical properties of copper matrix composite10.1016/j.jallcom.2019.07.183 ↗
32. Copper/graphene composites: a review10.1007/s10853-019-03703-5 ↗
33. Recent progress in architecture design of nanocarbon-reinforced metal matrix composites and their properties: a review10.1016/j.carbon.2024.119382 ↗
34. Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm10.1016/j.scriptamat.2020.06.051 ↗
35. Enhanced electrical conductivity and tensile strength of Cu/Single-Layer graphene/Cu nanomaterials10.1021/acsanm.2c05065 ↗
36. Ultrahigh electrical conductivity of graphene embedded in metals10.1002/adfm.201806792 ↗
37. Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling10.1016/j.ceramint.2013.06.091 ↗
38. Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying10.1007/s12613-020-2176-z ↗
39. Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite10.1016/j.msea.2019.138350 ↗
40. Compression properties and electrical conductivity of in-situ 20 vol.% nano-sized TiCx/Cu composites with different particle size and morphology10.3390/ma10050499 ↗
41. Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys10.1016/j.matdes.2014.08.027 ↗
42. Investigation on microstructure and properties of TiC0. 5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis10.1016/j.ceramint.2021.03.225 ↗
43. Mechanical properties and electrical conductivity of nano-La2O3 reinforced copper matrix composites fabricated by spark plasma sintering10.1088/2053-1591/ab36f7 ↗
44. Microstructures and properties of Al2O3 dispersion-strengthened copper alloys prepared through different methods10.1007/s12613-016-1367-0 ↗
45. A novel way for fabricating ultrafine grained Cu-4.5 vol% Al2O3 composite with high strength and electrical conductivity10.1016/j.matchar.2019.06.017 ↗
46. High temperature mechanical behavior of alumina dispersion strengthened copper alloy with high content of alumina10.1016/S1003-6326(15)63622-6 ↗
47. Structural and mechanical characterization of nano-structured Cu-Ag bimetallic coatings developed from a novel thiourea-based electroplating bath10.1016/j.matchar.2022.112011 ↗
48. Grain refinement and high-performance of equal-channel angular pressed Cu-Mg alloy for electrical contact wire10.3390/met4040586 ↗
49. Cu–Nb alloys prepared by mechanical alloying and subsequent heat treatment10.1016/S0925-8388(03)00634-0 ↗
50. Microstructure and properties of Cu–Ti–Ni alloys10.1007/s12613-015-1185-9 ↗
51. Characterization of Cu–Ti powder metallurgical materials10.1007/s12613-017-1381-x ↗
52. Microstructure and properties of Cu–Ni–Si–Cr alloy fabricated by vacuum-assisted die casting via direct aging10.1016/j.msea.2024.147120 ↗
53. High strength and high conductivity Cu alloys: a review10.1007/s11431-020-1633-8 ↗
54. Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: a review10.1016/j.pmatsci.2023.101141 ↗
55. Enhancement mechanisms of mechanical, electrical and thermal properties of carbon nanotube-copper composites: a review10.1016/j.jmrt.2024.07.181 ↗
56. The solubility of C in solid Cu
57. Preparation of high strength graphene reinforced Cu-based nanocomposites via mechanical alloying method: microstructural, mechanical and electrical properties10.1007/s00339-020-3412-0 ↗
58. Enhancement of multiwalled carbon nanotubes' electrical conductivity using metal nanoscale copper contacts and its implications for carbon nanotube-enhanced copper conductivity10.1021/acs.jpcc.0c05000 ↗
59. A general way to manipulate electrical conductivity of graphene10.1016/j.cej.2023.142139 ↗
60. Macro copper-graphene composites with enhanced electrical conductivity10.1016/j.jallcom.2021.162477 ↗
61. An axially continuous graphene-copper wire for high-power transmission: thermoelectrical characterization and mechanisms
62. Ultrahigh electrical conductivity of graphene embedded in metals10.1002/adfm.201806792 ↗
63. Enhanced electrical conductivity and tensile strength of Cu/single-layer graphene/Cu nanomaterials10.1021/acsanm.2c05065 ↗
64. A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites
65. Graphene and its derivative reinforced tungsten-copper composites for electrical contact applications: a review10.1177/07316844211063869 ↗
66. An overview of metal matrix nanocomposites reinforced with graphene nanoplatelets; mechanical, electrical and thermophysical properties10.3390/met8060423 ↗
67. Advanced electrical conductors: an overview and prospects of metal nanocomposite and nanocarbon based conductors10.1002/pssa.202000704 ↗
68. Electrical property of graphene and its application to electrochemical biosensing10.3390/nano9020297 ↗
69. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
70. New graphene composites for power engineering10.3390/ma15030715 ↗
71. Ultrahigh electron mobility in suspended graphene10.1016/j.ssc.2008.02.024 ↗
72. Contact resistivity and current flow path at metal/graphene contact10.1063/1.3491804 ↗
73. Effect of nano-scale Cu particles on the electrical property of CNT/polymer nanocomposites
74. Navasingh · 2019 · 153
75. A glimpse of the first eight months of the COVID-19 literature on microsoft academic graph: themes, citation contexts, and uncertainties10.3389/frma.2020.607286 ↗
76. Fabrication and Research progress of graphene reinforced Cu matrix composites
77. Progress on graphene/copper composites focusing on reinforcement configuration design: a review
78. Three-dimensional graphene networks: synthesis, properties and applications10.1093/nsr/nwu072 ↗
79. Electrochemistry of graphene, graphene oxide and other graphenoids: review10.1016/j.elecom.2013.08.028 ↗
80. Graphene and graphene derivatives toughening polymers: toward high toughness and strength10.1016/j.cej.2019.03.229 ↗
81. Chemical vapour deposition of graphene: layer control, the transfer process, characterisation, and related applications10.1080/0144235X.2019.1634319 ↗
82. Enhanced in tunning of photochemical and electrochemical responses of inorganic metal oxide nanoparticles via rGO frameworks (MO/rGO): a comprehensive review10.1016/j.mseb.2022.115632 ↗
83. Conductive enhancement of copper/graphene composites based on high-quality graphene10.1039/C5RA15189A ↗
84. Enhanced electrical and thermal conduction in graphene−encapsulated copper nanowires10.1021/nl504889t ↗
85. A new electrochemical approach for the synthesis of copper-graphene nanocomposite foils with high hardness10.1038/srep04049 ↗
86. Orientation dependence of thermal conductivity in copper-graphene composites10.1063/1.3641640 ↗
87. Effect of rare metal element interfacial modulation in graphene/Cu composite with high strength, high ductility and good electrical conductivity10.1016/j.apsusc.2020.147489 ↗
88. Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites10.1016/j.jallcom.2013.11.222 ↗
89. The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy10.1016/j.jallcom.2015.07.008 ↗
90. Microstructure, Electrical conductivity and hardness of multi layer graphene/copper nanocomposites synthesized by flake powder metallurgy10.1007/s12540-015-5058-6 ↗
91. Electrical conductivity of copper graphene composite films synthesized by electrochemical deposition with exfoliated graphene platelets10.1116/1.3701701 ↗
92. Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites10.1016/j.jallcom.2018.10.357 ↗
93. Direct synthesis of high-quality graphene on Cu powders from adsorption of small aromatic hydrocarbons: a route to high strength and electrical conductivity for graphene/Cu composite10.1016/j.jallcom.2019.05.273 ↗
94. Mechanical properties and thermal conductivity of graphene reinforced copper matrix composites10.1016/j.powtec.2016.06.045 ↗
95. Effect of interface structure on the mechanical properties of graphene nanosheets reinforced copper matrix composites10.1021/acsami.8b09799 ↗
96. Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites10.1016/j.compositesb.2018.11.004 ↗
97. Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids10.1016/j.carbon.2019.02.048 ↗
98. Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength10.1016/j.carbon.2017.10.095 ↗
99. Thermal properties of the binary-filler hybrid composites with graphene and copper nanoparticles10.1002/adfm.201904008 ↗
100. Wafer-scale single-crystal monolayer graphene grown on sapphire substrate10.1038/s41563-021-01174-1 ↗