journal article·2025-09Open access

Effects of PWHT on the microstructure, corrosion, tribology, and mechanical properties of mild steel welds under different joining positions: Experimental and Numerical Study

Behrouz Bagheri Vanani, Mohammad Reza Mehraban Dehaqani, Mahmoud Abbasi, Mahdi Sadeqi Bajestani, Melika Mohammadkhah, Sandra Klinge

Abstract

St37 mild steel has a broad range of applications in industry. The weldability of St37 using the Gas Metal Arc Welding (GMAW) method was investigated under flat and vertical-up welding positions. The effects of post-weld heat treatment (PWHT) on the microstructure, mechanical properties, corrosion resistance, and tribological behavior of the welded samples were thoroughly examined. A thermo-metallurgical finite element model (FEM) was employed to analyze the thermal history, phase distribution, and residual stress variation in double-sided butt-welded ST-37 samples during the GMAW process. The results indicated that PWHT significantly enhanced phase uniformity and microstructural homogeneity in the weld zone, leading to improved mechanical performance. Metallurgical defects, such as porosities, were effectively eliminated after PWHT, and residual stresses in the joint were significantly reduced. Corrosion resistance, influenced by microstructural evolution, followed the trend: Base metal ≥ Flat weld + PWHT > Flat weld > Vertical weld + PWHT > Vertical. Moreover, PWHT improved the wear resistance of welded specimens. This enhancement was attributed to stress relaxation, carbide formation through precipitation hardening, and the reduction of metallurgical defects. Notably, PWHT also contributed to a shift in the dominant wear mechanism from adhesive to abrasive in both flat and vertical welds.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Microstructure and mechanical properties of dissimilar friction stir welded type 304 austenitic stainless steel to Q235 low carbon steel10.1016/j.matchar.2019.109803 ↗
2. Me-chanical properties of friction stir welded St 37 and St 44 steel joints10.3139/120.111266 ↗
3. Investi- gation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
4. Effect variations and types of smaw welding electrodes on A39 steel to tensile test10.1088/1742-6596/1569/3/032052 ↗
5. Insight into the effect of weld pitch on the microstructure-properties relationships of St 32/AISI 309 steels dissimilar welds processed by friction stir welding10.1016/j.matchar.2021.111188 ↗
6. Advancements in joining Al-Zn-TiC-Mg composites using friction stir welding process: influence of traverse speed
7. Multi-pass friction stir welding of Al–TiC–Zn–Mg composite: microstructure and mechanical characteristics
8. Influence of variation ambient system on dissimilar friction stir welding of Al alloy to Mg alloy by the addition of nanoparticles and interlayer10.1007/s12540-024-01670-4 ↗
9. Fabrication of reinforced Al–Mg composite by TiC particles via FSW: microstructure and tribology study10.1016/j.jmrt.2024.05.066 ↗
10. Incorporation of SiC particles in FS welded zone of Mg alloy to improve the mechanical properties and corrosion resistance10.3139/146.111369 ↗
11. Microstructure and mechanical properties of pulsed Nd: YAG laser welding of st37 carbon steel10.1016/j.procs.2018.07.125 ↗
12. Study of the effect of shielding gas composition on the mechanical weld properties of steel ST 37-2 in gas metal arc welding10.1016/j.matdes.2009.03.031 ↗
13. Fariborz Amiri, Keyvan Seyedi Niaki, Seyed Ebrahim Vahdat, Repairing the surface grooves of St37 structural steel using flame spray welding, Int J Precis Eng Manuf Vol. 18, No. 12, pp. 1873-1879.10.1007/s12541-017-0216-z ↗
14. Characterizations of dissimilar friction welding of ST37 and CK60 steels
15. Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel10.1016/j.matchar.2012.09.004 ↗
16. A comparison of microstructure and mechanical characteristics correlation of the joint specimens for duplex stainless steel UNS S32304 and super-duplex stainless steel UNS S32750: the role of post-weld heat treatment
17. Gas tungsten arc welding joints: impact of post weld heat treatment (PWHT) and nitrogen addition in shielding gas, book chapter
18. Post-weld heat treatment and nitrogen application in welding of super duplex stainless steels
19. Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: a comparative investigation
20. Effect of post-weld heat treatment on mechanical properties and microstructure in electric arc welded mild steel joints10.1016/j.jer.2023.10.012 ↗
21. The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding
22. Pulsed Nd:YAG laser welding and subsequent post-weld heat treatment on super duplex stainless steel10.1016/j.jmapro.2016.12.015 ↗
23. Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al-Cu composite with Zn interlayer: effect of spot pass and shoulder diameter during the P-FSSW process
24. Investigation of SiC nanoparticle size and distribution effects on microstructure and mechanical properties of Al/SiC/Cu composite during the FSSW process: experimental and simulation
25. Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys10.1016/S1003-6326(21)65681-9 ↗
26. Numerical and experimental investigation of the formation mechanism and the distribution of the welding residual stress induced by the hybrid laser arc welding of AH36 steel in a butt joint configuration10.1016/j.jmapro.2020.01.008 ↗
27. Numerical simulations of laser and hybrid S700MC T-Joint welding10.3390/ma12030516 ↗
28. Simulation of laser butt welding of AISI 316L stainless steel sheet using various heat sources and experimental validation10.1016/j.jmatprotec.2014.12.008 ↗
29. Numerical simulation and experimental validation of residual stress and welding distortion induced by laser-based welding processes of thin structural steel plates in butt joint configuration10.1016/j.optlastec.2018.02.026 ↗
30. Influence of the first weld bead on strain and stress states in wire+arc additive manufacturing
31. A new finite element model for welding heat sources10.1007/BF02667333 ↗
32. Thermo-metallurgical simulation and performance evaluation of hybrid laser arc welding of chromium-molybdenum steel10.1016/j.matdes.2021.110029 ↗
33. Experimental and numerical investigation of laser-FSW hybrid welding technique for high strength materials10.1016/j.matpr.2022.05.579 ↗
34. Effect of overlap rate and pattern on residual stress in selective laser melting10.1016/j.ijmachtools.2019.103433 ↗
35. Prabhu · 2019
36. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
37. Kinetics of phase change. I general theory10.1063/1.1750380 ↗
38. Kinetics of phase change. I general theory10.1063/1.1750380 ↗
39. A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size10.1016/0001-6160(84)90211-6 ↗
40. Study of gravity effects on titanium laser welding in the vertical position10.3390/ma10091031 ↗
41. High speed imaging technique part 2—High speed imaging of power beam welding phenomena10.1179/136217110X12785889549949 ↗
42. Porosity formation mechanism and suppression procedure in laser welding of aluminium alloys10.1080/09507110109549341 ↗
43. Fusion zone microstructure and porosity in electron beam welds of an α+βTitanium alloy
44. Microstructure and micro-electrochemical properties of the heat affected zone in flash butt welded joints of corrosion resistant steel for marine flexible risers
45. Effect of creep fracture mode transition of P91 steel welded joints on long-term creep fracture life10.1016/j.jmrt.2024.10.214 ↗
46. Microstructural analysis and mechanical behavior of the HAZ in an API 5L X70 steel welded by GMAW process10.1007/s40194-021-01102-6 ↗
47. Fine-grain heat affected zone softening of G115/Sanicro25 dissimilar steel welded joints after post-weld heat treatment10.1016/j.ijpvp.2020.104253 ↗
48. Influence of post-weld heat treatment on the microstructure, microhardness, and toughness of a weld metal for hot Bend10.3390/met6040075 ↗
49. Double-sided single-pass submerged arc welding for 2205 duplex stainless steel10.1007/s11665-013-0529-8 ↗
50. Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process10.1016/j.jmatprotec.2011.01.012 ↗
51. Numerical modeling and experimental analysis of water jet spot welding and friction stir spot welding: a comparative study10.1007/s11665-020-05407-3 ↗
52. Finite element investigation of IGSCC-prone zone in AISI 304L multipass groove welds10.1007/s43452-020-00056-8 ↗
53. Experimental and FEM study of Ti containing TWIP steel weldability10.1016/j.jmatprotec.2018.05.028 ↗
54. Experimental and numerical simulation study on microstructure, residual stress and mechanical properties of Fe–Mn–C–Cr cryogenic high-manganese steel arc-welded joint10.1016/j.jmrt.2025.01.114 ↗
55. A different attempt to investigate the influence of PTA parameters on microstructure evolution and mechanical characteristics of nickel base powder (Ni-WC) deposited tool steel10.1016/j.jmrt.2023.11.230 ↗
56. Effect of post-weld heat treatment on mechanical and electrochemical properties of gas metal arc-welded 316L (X2CrNiMo 17-13-2) stainless steel10.1007/s11665-016-2240-z ↗
57. Callister · 2003
58. Wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing
59. Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement10.1080/10408436.2018.1490251 ↗
60. Microstructural evolution and micro-corrosion behaviour of flash-welded U71Mn joints as a function of post-weld heat treatment10.3390/ma16155437 ↗
61. Influence of tempering treatments on mechanical properties and hydrogen embrittlement of 13 wt% Cr martensitic stainless steel10.1016/j.ijpvp.2019.103969 ↗
62. Heat treatment effects on the hardness and wear behavior of laser-welded AISI40 martensitic steel plates10.1007/s00170-021-06942-6 ↗
63. Effect of post-weld heat treatment on the wear resistance of hardfacing martensitic steel deposits10.1080/09507110902844071 ↗
64. Tribological performance of weld joints fabricated using TIG welding on AISI304L stainless steel10.1177/17515831251326741 ↗
65. Analyzing microstructural evolution and wear behavior of friction stir welded dissimilar joints of SS304 and 2024-T3 Al alloy
66. 316L stainless steel repaired layers by weld surfacing and laser cladding on a 27SiMn steel: a comparative study of microstructures, corrosion, hardness and wear performances10.1016/j.jmrt.2023.01.162 ↗