journal article·2022-07Open access

Analysis of large edge breakage of WC-Co cemented carbide tool blades emerging in precision grinding process

Li Wei, Ju Wen-Liang, Long Gui, Wang Bo, Mohammad S. Alsoufi, Ammar Elsheikh, Ahmed Mohamed Mahmoud Ibrahim

Abstract

This paper analyzes the edge damage characteristics of the cutting blade made of WC-Co cemented carbide material after precision grinding. The edge damage characteristics present tiny cracks and serrated continuous edge breakage. The main causes of the edge damage were explored regarding the edge residual stress, microstructure, and the change of element content. The results show that the value of the average residual compressive stress on the rear surface of the caving edge is −1745.7 MPa, which is much larger than that recorded before grinding (−578.6 MPa). The content of element C and element W on the surface increased obviously (from 28.35% to 34.29% and 54.51%–61.06% respectively). The increase of WC grains and the decrease of Co content will lead to the decrease of the bonding strength of the corresponding material, which will easily lead to the crack at the edge and cave. The grinding experiment of WC-Co cemented carbide was carried out with a bowl shape resin-bonded diamond grinding wheel and was optimized with the orthogonal experimental method. The optimized results show that the single grinding amount was the biggest factor affecting the processing time. The angular speed of rotation and the single grinding amount was listed as the factors that had the greatest influence on the blade rejection rate. Considering the processing efficiency and quality comprehensively, adopting the improved combination during the grinding process, the experimental results were as follows the blade rejection rate is 10%, and the processing time of a single blade is 205 s.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Fabrication of dual-grain structure WC-Co cemented carbide by in-situ carbothermal reduction of WO3 and subsequent liquid sintering10.1016/j.ceramint.2020.02.045 ↗
2. Mechanical strength and fatigue lifetime of WC-Co cemented carbide in relation to the effectively loaded volume and surface10.1016/j.ijrmhm.2021.105658 ↗
3. Effect of interlayers on the structure and properties of TiAlN based coatings on WC-Co cemented carbide substrate10.1016/j.ijrmhm.2012.10.017 ↗
4. Fabrication and tribological properties of textured diamond coatings on WC-Co cemented carbide surfaces10.1016/j.ceramint.2020.10.124 ↗
5. Effect of crystallinity of WC on microstructure, properties, and application of WC-Co cemented carbide
6. Study on the oxidation of WC-Co cemented carbide under different conditions
7. Grinding of WC-Co hardmetals10.1016/S0043-1648(00)00561-5 ↗
8. Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides
9. Effects of binder concentration on the nanometric surface characteristics of WC-Co materials in ultra-precision grinding10.1016/j.ijrmhm.2019.105048 ↗
10. Prediction of crack paths in WC-Co alloys10.1016/0956-7151(92)90108-Q ↗
11. Role of co content on densification and microstructure of WC–Co cemented carbides prepared by selective laser melting10.1007/s40195-021-01195-4 ↗
12. Microstructure, mechanical properties, and cutting performances of WC-Co cemented carbides with Ru additions
13. Research on grinding forces of creep feed grinding cemented carbide tool helical grooves
14. Loading crack mode effects on the fracture toughness and fatigue growth resistance of WC-Co cemented carbides10.1016/j.scriptamat.2005.02.011 ↗
15. Mechanical strength improvement of electrical discharge machined cemented carbides through PVD (TiN, TiAlN) coatings10.1016/S0040-6090(03)01062-9 ↗
16. Surface integrity effects on the fracture resistance of electrical-discharge-machined WC–Co cemented carbides10.1111/j.1551-2916.2004.01687.x ↗
17. Micromechanical modelling of ductile crack growth in the binder phase of WC-Co10.1016/S0927-0256(03)00045-4 ↗
18. Surface damage mechanism of WC/Co and RB-SiC/Si composites under high spindle speed grinding (HSSG)10.1016/j.matdes.2015.12.055 ↗
19. X-ray diffraction determination of residual stresses in functionally graded WC-Co composites10.1016/j.ijrmhm.2004.06.002 ↗
20. Influence of microstructure on ultraprecision grinding of cemented carbides10.1016/j.ijmachtools.2003.10.022 ↗
21. Finite-element simulation and experiment on the residual stress when grinding nanostructured WC/12Co coatings
22. Experimental research on HVOF sprayed WC-17CO coating at high speed grinding mechanism
23. Cutting edge damage in grinding of cemented carbides micro end mills10.1016/j.ceramint.2017.05.336 ↗
24. Grinding effects on surface integrity and mechanical strength of WC-Co cemented carbides10.1016/j.procir.2014.04.044 ↗
25. On cutting mechanism of CBN-WC-10Co composite cutting tool material with WEDM
26. Energy and material removal mechanisms for the grinding of cemented carbide with brazed diamond wheels
27. Removal and fracture characteristics of cemented Tungsten carbide under nanoindenting and nanoscratching
28. Influence of cup wheel grinding and etching pretreatment on residual stress and surface topography for coated cemented carbide tools
29. Precision grinding of cemented carbides based on a multi-layer brazed diamond wheel using an electrolyte containing carbon nanotubes
30. Assessment of the surface integrity of ground cemented tungsten carbide cutting inserts and its influence on tool wear in turning of ferritic nodular cast iron10.1016/j.cirpj.2022.03.014 ↗