journal article·2022-11Open access

Influence of micro-rolling on the strength and ductility of plasma-arc additively manufactured Ti–6Al–4V alloys

Ziqin Pan, Haiou Zhang, Xinli Song, Guilan Wang, Chuandong Wu, XinWang Liu

Abstract

The aim of this study was to reduce the number of defects, refine the grain size, and improve the mechanical properties of Ti–6Al–4V. We investigated the effect of interpass micro-rolling on the microstructures and mechanical properties of Ti–6Al–4V alloys produced via plasma arc additive manufacturing (PAAM). The non-rolled plasma-arc additively manufactured (PAAMed) sample exhibited coarse columnar crystals, basket-weave microstructures, and Widmanstätten structures, while the interpass-micro-rolled PAAMed sample exhibited fine equiaxed crystals and basket-weave microstructures. Interpass micro-rolling could significantly reduce the number density and size of defects during PAAM, and the rolled samples exhibited lower mechanical property anisotropy than the non-rolled samples. Moreover, the rolled sample exhibited a higher yield strength (∼797.66 and 793.45 MPa), tensile strength (∼939.73 and 935.71 MPa), and elongation (∼12.83% and 14.73%) in the X- and Z-directions than the unrolled sample. These enhanced mechanical properties can be attributed to αGB fragmentation, grain boundary strengthening, dislocation strengthening, and a low crack density. The micro-cracks preferentially nucleated around defects in the non-rolled sample, resulting in high crack and defect densities.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗
2. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
3. Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb10.1016/j.jallcom.2017.09.163 ↗
4. A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys10.1016/j.jallcom.2021.163242 ↗
5. Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
6. Toward superior fatigue crack growth resistance of TC4-DT alloy by in-situ rolled wire-arc additive manufacturing10.1016/j.jmrt.2021.08.152 ↗
7. Microstructure and texture evolution of Ti-6Al-4V alloy T-joint fabricated by dual laser beam bilateral synchronous welding10.1016/j.msea.2021.141426 ↗
8. Grain boundary discontinuity and performance improvement mechanism of wire arc additive manufactured Ti-6Al-4V10.1016/j.jallcom.2021.159287 ↗
9. The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding10.1016/j.msea.2015.02.051 ↗
10. Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: microstructure evolution and mechanical properties, Mater. Sci
11. Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing10.1016/j.ijheatmasstransfer.2018.03.085 ↗
12. Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)10.1016/j.msea.2011.10.095 ↗
13. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting10.1016/j.matchar.2013.07.012 ↗
14. Heterogeneous random medium plasticity and fracture model of additively-manufactured Ti-6Al-4V10.1016/j.actamat.2018.02.025 ↗
15. Mechanical properties and microstructural features of direct laser-deposited Ti-6Al-4V10.1007/s11837-015-1308-9 ↗
16. State of art on wire feed additive manufacturing of Ti-6Al-4V alloy10.1016/j.matpr.2020.02.551 ↗
17. Review on effect of heat input for wire arc additive manufacturing process10.1016/j.jmrt.2021.02.002 ↗
18. Effects of processing parameters on surface rough-ness of additive manufactured Ti-6Al-4V via electron beam melting10.3390/ma10101121 ↗
19. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
20. Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing10.1016/j.matdes.2016.04.018 ↗
21. Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V10.1016/j.jallcom.2018.07.235 ↗
22. Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
23. The effect of wire size on high deposition rate wire and plasma arc additive manufacture of Ti-6Al-4V10.1016/j.jmatprotec.2020.116842 ↗
24. The role of microstructure and local crystallographic orientation near porosity defects on the high cycle fatigue life of an additive manufactured Ti-6Al-4V10.1016/j.matchar.2020.110576 ↗
25. Microstructure of interpass rolled wire þ arc additive manufacturing Ti-6Al-4V components10.1007/s11661-015-3172-1 ↗
26. Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling10.1108/RPJ-01-2012-0006 ↗
27. Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement
28. Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment10.1016/j.jmbbm.2016.12.015 ↗
29. Enhanced strength and ductility in thin Ti-6Al-4V alloy components by alternating the thermal cycle strategy during plasma arc additive manufacturing10.1016/j.msea.2019.05.025 ↗
30. Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening10.1016/j.jallcom.2021.163335 ↗
31. Ti-6Al-4V alloy strengthening via instantaneous phase transformation induced by electropulsing10.1016/j.jallcom.2021.163303 ↗
32. The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319[J]10.1016/j.jmatprotec.2018.07.030 ↗
33. A review on wire and arc additive manufacturing of titanium alloy10.1016/j.jmapro.2021.08.018 ↗
34. Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure10.1016/j.scriptamat.2017.11.021 ↗
35. Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy10.1016/j.msea.2018.06.019 ↗