Investigation of microstructure evolution and mechanical properties of 2A10 aluminum alloy during ultrasonic vibration plastic forming
Source abstract
Abstract
Ultrasonic vibration-assisted plastic forming technology is promising since it can reduce the forming force and improve the quality of surface. However, the microstructure and deformation uniformity in the whole sample were rarely taken into account. In this paper, 2A10 Al alloy, which is commonly used in aviation rivets, is selected as the research object for ultrasonic assisted compression test. The test results show that ultrasonic vibration can significantly reduce the flow stress during Al deformation and increase the material hardness. Ultrasonic vibration provides energy for dislocation movement, which makes easier the dislocation to overcome an obstacle. In addition, it also refine the grain, increases the deformation degree of the small deformation region, and reduces the difference of deformation degree between different areas, resulting in improved deformation homogeneity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Elongation of zinc crystals under ultrasonic effect10.1007/BF00623773 ↗
2. Effects of ultrasonic vibration on the compression of pure titanium10.1016/j.ultras.2018.04.006 ↗
3. Effect of ultrasonic vibration-assisted laser surface melting and texturing of Ti-6Al-4V ELI alloy on surface properties10.1016/j.jmst.2018.09.057 ↗
4. Comparison between ultrasonic vibration-assisted upsetting and conventional upsetting10.1007/s11661-013-1651-9 ↗
5. Influence of ultrasonic vibration on the plasticity of metals during compression process10.1016/j.jmatprotec.2017.08.021 ↗
6. Superimposed ultrasonic oscillations in compression tests of aluminum10.1016/j.ultras.2006.05.116 ↗
7. Investigations on the material property changes of ultrasonic-vibration assisted aluminum alloy upsetting10.1016/j.matdes.2012.07.021 ↗
8. Investigations on the effects of ultrasonic vibrations in the extrusion process10.1016/j.jmatprotec.2006.11.168 ↗
9. The surface effect of ultrasonic vibration in double cup extrusion test10.1016/j.jmatprotec.2021.117344 ↗
10. Influence of ultrasonic vibrations on tube spinning process10.1016/j.jmatprotec.2012.02.006 ↗
11. Ultrasonic vibration-assisted metal forming: constitutive modelling of acoustoplasticity and applications10.1016/j.jmatprotec.2018.10.012 ↗
12. Ultrasonic assisted incremental sheet forming: constitutive modeling and deformation analysis10.1016/j.jmatprotec.2021.117365 ↗
13. Effect of microstructural complexity on the hot deformation behavior of aluminum alloy 202410.1016/j.msea.2003.09.078 ↗
14. Ultrasonic dynamic impact effect on deformation of aluminum during micro-compression tests10.1016/j.jmatprotec.2018.03.021 ↗
15. Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting10.1016/j.jmatprotec.2011.10.017 ↗
16. Dynamic tensile tests with superimposed ultrasonic oscillations for stainless steel type 321 at room temperature10.1016/0029-5493(87)90080-X ↗
17. Investigation on ultrasonic volume effects: stress superposition, acoustic softening and dynamic impact10.1016/j.ultsonch.2018.05.039 ↗
18. Constitutive behavior and microstructural evolution in ultrasonic vibration assisted deformation of ultrathin superalloy sheet10.1016/j.ijmecsci.2019.05.009 ↗
19. Investigation of acoustic softening and microstructure evolution characteristics of Ti3Al intermetallics undergoing ultrasonic vibration-assisted tension10.1016/j.matdes.2022.111015 ↗
20. Effect of variational friction and elastic deformation of die on oscillating cold forging for spline shaft10.1016/j.jmatprotec.2017.01.001 ↗
21. Microstructure of the pure copper produced by upsetting with ultrasonic vibration10.1016/j.matlet.2011.08.086 ↗
22. Effects of ultrasound on deformation characteristics of metals10.1109/T-SU.1966.29367 ↗
23. Analytical description of ultrasonic hardening and softening10.1016/j.ultras.2011.02.003 ↗
24. Acoustic softening and stress superposition in ultrasonic vibration assisted uniaxial tension of copper foil: experiments and modeling10.1016/j.matdes.2016.09.042 ↗
25. Investigation on ultrasonic vibration effects on plastic flow behavior of pure titanium: constitutive modeling10.1016/j.jmrt.2020.03.017 ↗
26. Investigations on the surface effect of ultrasonic vibration-assisted 6063 aluminum alloy ring upsetting10.1007/s00170-018-1611-z ↗
27. Forming mechanism of ultrasonic vibration assisted compression10.1016/S1003-6326(15)63850-X ↗
28. Mechanical behaviors and microstructure characteristics of W-tempered and peak-aged 7075 alloy sheets under low frequency vibration–assisted tension10.1016/j.msea.2021.142338 ↗
29. Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains10.1016/S1359-6454(02)00174-X ↗
30. Microstructure investigations on 2A10 aluminum alloy bars subjected to electromagnetic impact upsetting10.1016/j.msea.2017.06.039 ↗
31. Grain size, precipitation behavior, and mechanical properties through the thickness of Al-Mg-Si aluminum alloy rings produced by compact cast-rolling compound forming10.1007/s11665-021-06326-7 ↗
32. Dislocation sources and the flow stress of polycrystalline thin metal films10.1080/0950083021000050287 ↗
33. Acoustic softening and residual hardening in aluminum: modeling and experiments10.1016/j.ijplas.2012.06.003 ↗
34. Influence of low-frequency vibrations on the compression behavior and microstructure of T2 copper10.1016/j.msea.2017.10.083 ↗
35. Orientation dependence of shear banding in face-centered-cubic single crystals10.1016/j.actamat.2012.03.005 ↗
36. Formation mechanism of dislocation patterns under low cycle fatigue of a high-manganese austenitic TRIP steel with dominating planar slip mode10.1016/j.ijplas.2019.06.009 ↗
37. New insight on acoustoplasticity – ultrasonic irradiation enhances subgrain formation during deformation10.1016/j.ijplas.2010.09.007 ↗
38. A universal law for metallurgical effects on acoustoplasticity10.1016/j.mtla.2019.100214 ↗
39. The effect of tensile deformation by in situ ultrasonic treatment on the microstructure of low-carbon steel10.1016/j.actamat.2012.11.036 ↗
40. Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy10.1016/j.jmatprotec.2021.117360 ↗
41. Investigation of ultrasonic vibration effects on the microstructure and hardness of aluminum alloy 2024 tube spinning parts10.1007/s00170-014-6500-5 ↗