In situ observation of pearlite phase transition in high-carbon steel under different holding temperatures and cooling rates using confocal laser scanning microscope
Source abstract
Abstract
The pearlite phase transition behavior of the high-carbon steel (0.82% C) under different holding temperatures (1050 °C and 1450 °C) and cooling rates (60, 300 and 600 °C/min)were investigated using a confocal laser scanning microscope (CLSM). The phase diagram of the researched steel in an equilibrium state was calculated by JMatPro software, and the identifications of the pearlite lamellar spacing and dislocation density were conducted by SEM and TEM analysis, respectively. The in situ observation showed that the pearlite formed at the grain boundary and grew into austenite grains. As the cooling rate increased, the beginning and finishing temperature of pearlite transition moved in a lower direction as a whole. Compared with the normal heat treatment of 1050 °C, the pearlite formation temperature increased by 30 °C with a holding temperature of 1450 °C at the same cooling rate of 60 °C/min, which was contributed to the enhancement of dislocation density along the grain boundary. In addition, the liner relationship between average phase transition temperature and reciprocal of pearlite lamellar spacing was obtained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Investigating the effects of short time austenitizing and cooling rate on pearlitic microstructure and mechanical properties of a hot rolled plain eutectoid carbon steel10.1016/j.matdes.2014.11.038 ↗
2. Effect of initial microstructure on the work hardening behavior of plain eutectoid steel10.1016/j.msea.2015.02.040 ↗
3. Effect of recalescence on microstructure and phase transformation in high carbon steel10.1179/1743284713Y.0000000205 ↗
4. Effect of cooling rate and isothermal temperature on the phase transformation and microstructure evolution in SWRH82B high-carbon steel10.1088/2053-1591/aad269 ↗
5. Effect of prior austenite grain size on pearlite transformation in a hypoeuctectoid Fe-C-Mn steel10.1007/s11661-013-1996-0 ↗
6. The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod10.1016/S0261-3069(03)00095-5 ↗
7. The effect of interlamellar spacing on strength of pearlite in annealed eutectoid and hypoeutectoid plain carbon steels10.1016/0956-7151(91)90002-I ↗
8. Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steel10.1016/j.jmrt.2019.04.006 ↗
9. Phase-field simulations of pearlitic divergence in Fe-C-Mn steels10.1016/j.actamat.2018.02.059 ↗
10. Dislocation-based plasticity and strengthening mechanisms in sub-20 nm lamellar structures in pearlitic steel wire10.1016/j.actamat.2016.04.040 ↗
11. Dynamic studies of the tensile deformation a ND fracture of pearlite10.1016/0001-6160(78)90156-6 ↗
12. Developing very fine nanopearlitic structure in a high carbon steel wire before drawing
13. Some aspects of the structure-property relationships in high-carbon ferrite-pearlite steels
14. The structure and properties of drawn pearlite10.1016/0001-6160(66)90296-3 ↗
15. Effect of pearlite morphology on impact toughness of eutectoid steel containing vanadium10.1179/mst.1988.4.4.328 ↗
16. A review of the data on the interlamellar spacing of pearlite10.1007/BF02644694 ↗
17. Effect of continuous cooling on the morphology and kinetics of pearlite10.1007/BF03161825 ↗
18. Study on primary carbides precipitation in H13 tool steel regarding cooling rate during solidification10.1007/s41230-020-9092-8 ↗
19. In situ observation of solidification behavior in undercooled Pd-Cu-Ni-P alloy by using a confocal scanning laser microscope10.1016/S1359-6454(00)00353-0 ↗
20. Microstructure observation and quantification of the liquid fraction of M2 steel grade in the semi-solid state, combining confocal laser scanning microscopy and X-ray microtomography10.1016/j.actamat.2013.11.075 ↗
21. In situ observation of crystallization and growth in high-temperature melts using the confocal laser microscope10.1007/s11663-016-0675-0 ↗
22. Vander Voort · Metallography · 1984 · 17 · 110.1016/0026-0800(84)90002-8 ↗
23. In situ investigation of phase transformation behaviors of 300M steel in continuous cooling process10.1016/j.matchar.2018.07.034 ↗
24. In-situ observation of the fusion zone under different high heat input for hot-rolled ship plate steel with 0
25. Development of fatigue testing system for in-situ observation of stainless steel 316 by HS-AFM & SEM10.1016/j.ijfatigue.2019.05.015 ↗
26. Effects of high-temperature deformation and cooling process on the microstructure and mechanical properties of an ultrahigh-strength pearlite steel
27. Effect of processing parameters on the microstructure and properties of an
28. Kimura · 2010 · 11
29. Modelling thermal and microstructural evolution on runout table of hot strip mill10.1179/mst.1991.7.4.360 ↗
30. Microstructure engineering by dispersing nano-spheroid cementite in ultrafine-grained ferrite and its implications on strength-ductility relationship in high carbon steel10.1016/j.matdes.2017.11.019 ↗
31. Strain dependent evolution of microstructure and texture in severely cold-rolled and annealed ultrafine pearlite10.1016/j.matchar.2020.110583 ↗
32. formation of abnormal structures and their effects on the ductility of eutectoid steel10.1007/s12540-016-6251-y ↗
33. Microstructure evolution and mechanical properties of eutectoid steel with ultrafine or fine (ferrite + cementite) structure10.1016/j.msea.2014.01.037 ↗
34. Microstructure and hardness evolution during deformation near Ae3 in a Cr-Mn-Ti gear steel10.1002/srin.201800332 ↗
35. Temperature dependence of carbon supersaturation of ferrite in bainitic steels10.1016/j.scriptamat.2012.08.007 ↗
36. Effect of prior-austenite grain size and transformation temperature on nodule size of microalloyed hypereutectoid steels10.1007/s11661-005-0102-7 ↗
37. Effect of carbon content on the Hall-Petch parameter in cold drawn pearlitic steel wires10.1023/A:1015361031384 ↗
38. Advanced metallurgical alloy design and thermomechanical processing for rails steels for North American heavy haul use10.1016/j.wear.2010.10.048 ↗
39. Efficient thermo- mechanical model for solidification processes10.1002/nme.1614 ↗
40. Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws10.1016/j.jmatprotec.2007.06.060 ↗
41. Numerical simulation on solidification and thermal stress of continuous casting billet in mold based on meshless methods10.1016/j.msea.2007.02.103 ↗
42. Influence of stresses on the kinetics of pearlitic transformation during continuous cooling10.1016/0001-6160(87)90109-X ↗
43. The effect of small stress on the kinetics of the bainite transformation10.1016/0921-5093(95)09769-4 ↗
44. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
45. On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel, Multiscale investigation10.1016/j.jmst.2019.09.017 ↗