journal article·2024-03Open access

Optimization of hot deformation parameters for multi-directional forging of Ti65 alloy based on the integration of processing maps and finite element method

Peng Zhu, Shu Yang, Zhijie Gao, Jianrong Liu, Li Zhou

Abstract

In this paper, the hot deformation behavior of Ti65 alloy was investigated over the temperature range of 930–1110 °C with the strain rate of 0.001–1 s−1. According to the stress-strain curves, the constitutive equation was developed to describe the flow behavior of Ti65 alloy. The processing maps were constructed based on the dynastic materials model (DMM) and the perfect formability zone of Ti65 alloy is found under the temperature of 970–1020 °C and the strain rate of 0.001–0.1 s−1. In addition, a three-dimensional nonlinear transient thermo-mechanically coupled finite element model of the multi-dimensional forging (MDF) process of Ti65 alloy was developed. The effects of the forging temperature and forging speed, on the temperature rise, residual stress, and grain refinement were predicted. By analyzing the temperature and stress distribution, the optimum forging temperature and speed for Ti65 alloys were determined to be 1000 °C and 10 mm/s, respectively. Increasing the forging temperature or reducing the forging speed reduces the temperature rise and the maximum tensile stress, thus reducing the risk of cracking. Additionally, the equivalent strain increases as forging speed decreases. Simultaneously, the accumulated strain is more significant for the inside of the forgings. The results of this research are instructive for the optimization of the MDF process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Realizing deep penetration and superior mechanical properties in a titanium alloy thick plate joint via vacuum laser beam welding10.1016/j.jmrt.2023.08.059 ↗
2. Recent developments in cold dwell fatigue of titanium alloys for aero-engine applications: a review10.1016/j.jmrt.2022.07.094 ↗
3. Oxide formation on titanium alloys in primary water of nuclear pressurised water reactor10.1016/j.corsci.2019.01.020 ↗
4. Recent advances in silicon containing high temperature titanium alloys10.1016/j.jmrt.2021.08.117 ↗
5. Tensile properties of a newly developed high-temperature titanium alloy at room temperature and 650 °C10.1016/j.msea.2018.01.113 ↗
6. First-principles investigation of interaction between surface oxygen and other alloy atoms in α-Ti (0001) for designing high-temperature titanium alloy10.1016/j.apsusc.2022.154535 ↗
7. Enhanced mechanical properties of a near-α titanium alloy by tailoring the silicide precipitation behavior through severe plastic deformation10.1016/j.msea.2023.145356 ↗
8. Enhancing strength and ductility of low RE content Mg-Gb-Y-Zr alloy via a noval thermomechanical treatment based on multi-directional forging10.1016/j.jallcom.2023.170535 ↗
9. Microstructure and mechanical properties of in situ TiB2⋅TiAl3/2024Al composite subjected to multidirectional forging10.1016/j.jmrt.2022.10.098 ↗
10. Characterization of hot workability of Ti-6Cr-5Mo-5V-4Al alloy based on hot processing map and microstructure evolution10.1016/j.jallcom.2022.164161 ↗
11. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloy
12. Mechanical behaviour and microstructural evolution of Ti-6Al-1Mo-1V-2Zr-2Cr-1Fe alloy subjected to hot compression deformation10.1016/j.jmrt.2023.10.086 ↗
13. An investigation into Arrhenius type constitutive models to predict complex hot deformation behavior of TC4 alloy having bimodal microstructure
14. Hot deformation behaviors and dynastic recrystallization mechanism of Ti-35421 alloy in βsingle field10.1016/S1003-6326(22)65991-0 ↗
15. Flow behavior and 3D processing map for hot deformation of Ti-2.7Cu-alloy10.1016/j.jmrt.2019.12.093 ↗
16. Hot deformation behavior, microstructure evolution and processing map of Cu-2Be alloy10.1016/j.jmrt.2023.02.215 ↗
17. The high-temperaturre deformation behavior of a novel near-αtitanium alloy and hot -forging based on the processing map10.1016/j.vacuum.2019.109135 ↗
18. Characterization on hot deformation behavior of Ti-22Al-25Nb alloy using a combination of 3D processing maps and finite element simulation method10.1016/j.jallcom.2018.04.225 ↗
19. Analysis of metal workability by integration of FEM and 3-D processing maps10.1016/j.jmatprotec.2007.11.308 ↗
20. Microstructure and mechanical properties of AZ31 magnesium alloy processed by multi-directional forging at different temperatures10.1016/j.msea.2016.07.052 ↗
21. Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti6510.1016/j.jmst.2020.02.026 ↗
22. Effect of thermomechanical treatment on the microstructure evolution and mechanical properties of lightweight Ti65(AlCrNb)35 medium-entropy alloy10.1016/j.intermet.2022.107470 ↗
23. Tensile properties of laser precipitated Ti65 titanium alloy
24. Influence of silicide and texture on the room temperature deformation size effect of Ti65 alloy sheets/foils and its constitutive model modification
25. Microstructured/texture evolution maps to optimize hot deformation process of near-α titanium alloy10.1016/j.pnsc.2020.01.004 ↗
26. Hot behavior of supercritical martensitic stainless steel at elevated temperature
27. Constitutive equations for modelling flow softening due to dynastic recovery and heat generation during plastic deformation10.1016/S0167-6636(97)00035-5 ↗
28. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
29. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
30. Modeling of dynastic material behavior in hot deformation: Forging of Ti-624210.1007/BF02664902 ↗
31. Investigation of high temperature behavior and processing map of Ti-6Al-4V-0.11Ru titanium alloy10.1016/j.jallcom.2019.02.046 ↗
32. Hot compression rheological behavior of micro-alloying 8630 steel
33. Analysis of residual stresses in electron beam welding with filler wire of Ti62A alloy10.1016/j.jmrt.2023.01.081 ↗
34. Numerical and experimental study on the properties of laser cladding of 6061Al alloy10.1007/s12666-021-02485-2 ↗
35. Investigation of mechanical and microstructural properties of Ti-6Al-4V alloy depending on hot forging process parameters10.1016/j.proeng.2017.10.974 ↗
36. Selection of forging process for compressor disc for aero engine using finite element analysis10.1016/j.matpr.2022.02.035 ↗
37. Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperature10.1016/S1003-6326(14)63192-7 ↗