The study on the effect of various tool wear indicators on the machining of MMCs
Source abstract
Abstract
This paper aims to conduct tool wear experiments on cutting SiCp/Al composite materials, and methodically reveal the wear evolution of PCD tools in some detail. Based on the experiments, five-tool wear schemes are rationally developed, including free from wear, crater wear, flank wear, combined crater and flank wear, and edge blunting. The accurate equivalent homogeneous material (EHM) turning simulation model of SiCp/Al composite material is constructed and verified using AdvantEdge software. Subsequently, comprehensive studies have been conducted to analyze the effect of various tool wear patterns on the SiCp/Al cutting process. The results indicate that the crater wear of the tool is positively correlated with the radius of curvature of the chip. Additionally, the flank wear of the tool demonstrates a negative correlation with both the thickness and length of the chips. The actual cutting temperature is 11.3% lower compared to the simulated data, whereas the actual cutting forces in the X and Y directions are 16.1% and 13.7% higher, respectively. The flank wear degree of the tool and the edge blunting both remarkably influence the cutting force in the Y direction and the surface residual stress after machining. As the degree of wear increases, the cutting force in the Y direction and the surface residual stress rise, and the penetration layer of the residual stress becomes deeper, which is attributed to the significantly enhanced ploughing effect of the tool. This study provides a valuable reference for predicting the wear status of cutting tools, particularly in machining difficult-to-machine materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Modeling of machining of composite materials: a review10.1016/j.ijmachtools.2012.01.006 ↗
2. An investigation on the machinability of Al-SiC metal matrix composites using pcd inserts10.1007/s00170-007-1111-z ↗
3. The wear of polycrystalline diamond tools used in the cutting of metal matrix composites10.1016/S0263-4368(98)00040-7 ↗
4. Aluminum-based MMC machining with diamond-coated cutting tools10.1016/S0257-8972(97)00521-5 ↗
5. Machining of Al/SiC particulate metal-matrix composites Part Ⅰ: tool performance10.1016/S0924-0136(98)00054-5 ↗
6. Experimental investigation on ultrasonic vibration-assisted turning of SiCp/Al composites
7. Evaluation of machining performance of MMC with PCBN and PCD tools10.1016/j.wear.2005.02.094 ↗
8. Investigation and modeling of flank wear process of different PCD tools in cutting titanium alloy Ti6Al4V10.1007/s00170-017-1222-0 ↗
9. Investigation of machinability of Ti-B-SiCp reinforced Cu hybrid composites in dry turning
10. Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites10.1016/j.jmatprotec.2008.10.057 ↗
11. Analysis of two- and three-body abrasive wear during machining of aluminium-based metal matrix composite10.1504/IJMPT.2013.052793 ↗
12. Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites10.1007/s00170-021-06889-8 ↗
13. Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu-B-CrC based ceramic matrix composites
14. Machinability aspects of metal matrix composites
15. A consideration of tool wear mechanism when machining metal matrix composites (MMC)10.1016/S0007-8506(07)62400-7 ↗
16. Diamond tools wear and their applicability when ultra-precision turning of SiCp/2009Al matrix composite10.1016/j.wear.2009.09.002 ↗
17. An energy based analytical force model for orthogonal cutting of metal matrix composites10.1016/S0007-8506(07)60652-0 ↗
18. Tool wear and surface quality of metal matrix composites due to machining: a review10.1177/0954405416667402 ↗
19. Cutting tool wear-mechanisms
20. Diamond tools wear and their applicability when ultra-precision turning of SiCp/2009Al matrix composite
21. Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tool10.1016/j.wear.2010.04.013 ↗
22. Tool wear simulation of complex shaped coated cutting tools10.1016/j.wear.2015.01.015 ↗
23. Tool wear characteristics analysis of cBN cutting tools in high-speed turning of Inconel 71810.1016/j.ceramint.2022.09.034 ↗
24. An FEM-based approach for tool wear estimation in machining10.1016/j.wear.2016.08.007 ↗
25. Development and implementation of crater and flank tool wear model for hard turning simulations10.1007/s00170-022-08885-y ↗
26. Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis10.1016/j.triboint.2016.03.008 ↗
27. 3D modeling of tool wear and optimization in hard turning considering the effects of tool cutting edge and nose radii
28. Modeling and simulation of tool wear during the cutting process10.1016/j.procir.2013.06.107 ↗
29. Evaluation of tool wear and cutting performance considering effects of dynamic nodes movement based on FEM simulation10.1016/j.cja.2020.08.003 ↗
30. Study on the effect of wear models in tool wear simulation using hybrid SPH-FEM method10.1016/j.procir.2023.03.070 ↗
31. Evaluation of tool wear during turning of Ti6Al4V alloy applying MQL technique with Cu nanoparticles diversified in terms of size
32. Evaluation of physical indicators and tool wear during grooving of spheroidal cast iron with a novel WCCo/cBN (BNDCC) inserts
33. A novel hybrid micro-texture for improving the wear resistance of PCD tools on cutting SiCp/Al composites10.1016/j.jmapro.2023.06.027 ↗
34. A novel approach to cutting tool edge design based on initial wear stage10.1016/j.jmatprotec.2022.117561 ↗
35. Multiobjective optimization of tool geometric parameters using genetic algorithm10.1155/2018/9692764 ↗
36. An improved approach to tool life promotion concerning cutting edge microgeometry10.1007/s00170-023-11204-8 ↗
37. Research on 3D milling simulation of SiC p/Al composite based on a phenomenological model10.1007/s00170-017-0315-0 ↗
38. Analysis of the cutting mechanics under the influence of worn tool geometry10.1016/j.procir.2013.06.075 ↗
39. Size effect on surface generation in micromilling of hardened tool steel10.1016/S0007-8506(07)60490-9 ↗
40. Investigations of tool edge radius effect in micromachining: a FEM simulation approach10.1016/j.jmatprotec.2007.04.137 ↗