journal article·2024-05Open access

Quasi-static compressive fracture behavior of three-period minimum surface Al2O3 / Al composites fabricated by stereolithography

Fulong Zhang, Kai Qian, Ping Lu, Shuangyu Liu, Sen Lu, Qimeng Liu, Bo Cui

Abstract

Extensive research has been conducted on the structures and preparation methods of ceramic/metal composites to achieve materials with superior strength and toughness. Among these, the triply periodic minimal surface (TPMS) structure stands out due to its remarkable advantages. In this study, we employed SLA additive manufacturing to fabricate a Gyroid-structured ceramic skeleton, and utilized metal infiltration to prepare interpenetrating Al 2 O 3 /Al composites. A comparison was made between the compressive properties of Al 2 O 3 /Al interpenetrating composites with Gyroid curved surface structure and those with honeycomb structure. The experimental outcomes indicate that compressive failure in both structural composites primarily occurs at the bond interface between the ceramic framework and the metal. These composites exhibit brittle fracture and experience shear failure. Furthermore, the compressive failure mechanism involves a mixed fracture composed of cleavage and micropore polymerization fractures. Gyroid curved structural composites exhibit lower local stress concentration due to their smooth and regular topology, rendering them with higher strength and ductility compared to honeycomb structural composites. The ultimate compressive strength of the Gyroid curved composite is 264 MPa, representing a 3.8-fold increase over the honeycomb structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Theoretical hardness analysis and experimental verification for composite ceramic tool materials10.1016/j.ceramint.2017.08.112 ↗
2. A novel SiC composite material infiltrated by basalt glass-ceramic with a high hardness10.1016/j.ceramint.2023.05.293 ↗
3. Length-scale effect on the hardness of metallic/ceramic multilayered composites: a machine learning prediction10.1016/j.scriptamat.2023.115921 ↗
4. Plasma sprayed Cr2O3 ceramic coating for the surface modification of Al-Si (LM13) alloy: morphology and hardness study10.1016/j.matpr.2022.07.348 ↗
5. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings — a new fabrication mode for all-ceramic restorations10.1016/j.dental.2008.04.019 ↗
6. The influence of TiB2 content on high temperature flexural strength and reliability of the developed titanium carbonitride based ceramic tool material10.1016/j.ceramint.2020.01.032 ↗
7. Microstructure and mechanical properties of Al2O3/Al2O3 composite densified through a slurry infiltration and sintering process10.1016/j.jmrt.2023.06.167 ↗
8. Experimental characterisation and numerical simulation of ballistic penetration of columnar ceramic/fiber laminate composite armor10.1016/j.matdes.2022.111394 ↗
9. Relationships between distribution characteristics of ceramic fragments and anti-penetration performance of ceramic composite bulletproof insert plates10.1016/j.dt.2021.10.003 ↗
10. Polyurea-coated ceramic-aluminum composite plates subjected to low velocity large fragment impact
11. 1 - introduction and applications of SiC ceramics,//RUYS A J
12. Crack-healing and pre-oxidation behavior of ZrO2 fiber toughened ZrB2-based ceramics10.1016/j.ijrmhm.2014.07.017 ↗
13. Strength-toughness improvement of martensite-austenite dual phase deposited metals after austenite reversed treatment with short holding time10.1016/j.msea.2019.03.125 ↗
14. Fabrication of ceramic reinforcement aluminium and its alloys metal matrix composite materials: a review10.1016/j.matpr.2018.06.223 ↗
15. The conflicts between strength and toughness10.1038/nmat3115 ↗
16. How to select discrete or continuous interfaces in biological materials to achieve a strength-toughness tradeoff10.1016/j.jmps.2023.105502 ↗
17. Preparation and wear resistance of ZrO2 toughened Al2O3 ceramic particles reinforced high chromium cast iron matrix composites by powder sintering and casting
18. Analysis of ballistic resistance of composites based on EN AC-44200 aluminum alloy reinforced with Al2O3 particles10.1016/j.compstruct.2018.06.099 ↗
19. Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: evaluation of ballistic behaviour10.1016/j.dt.2018.08.002 ↗
20. Unveiling the corrosion perspective of Al-Si alloy/SiC foam interpenetrating phase composite
21. Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties10.1016/j.ceramint.2021.09.232 ↗
22. Effects of pore density on microstructure and mechanical properties of porous SiC ceramic foam/Zr-based metallic glass interpenetrating phase composites10.1016/j.intermet.2020.106964 ↗
23. Metal matrix composites10.1146/annurev-matsci-070909-104511 ↗
24. In-situ SEM investigation on the damage behavior of an interpenetrating metal ceramic composite10.1016/j.compstruct.2023.117278 ↗
25. Processing and characterization of Al-Si alloy/SiC foam interpenetrating phase composite10.1016/j.matpr.2021.01.923 ↗
26. 2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg10.1016/j.compstruct.2021.113742 ↗
27. A novel approach to fabricate ceramic/metal interpenetrating phase composites by ultrasonic-assisted spontaneous infiltration10.1016/j.ceramint.2020.09.121 ↗
28. Warren · 2022
29. Lamellar-interpenetrated Al–Si–Mg/SiC composites fabricated by freeze casting and pressureless infiltration10.1016/j.msea.2015.02.012 ↗
30. Digital light processing 3D printing of porous ceramics based on multi-materials additive manufacturing10.1016/j.cjsc.2023.100106 ↗
31. Recent progress of alumina ceramics by direct ink writing: ink design, printing and post-processing10.1016/j.ceramint.2023.01.143 ↗
32. Stereolithography 3D printing of Si3N4 cellular ceramics with ultrahigh strength by using highly viscous paste10.1016/j.ceramint.2022.10.137 ↗
33. Mechanical and dielectric properties of Si3N4-SiO2 ceramics prepared by digital light processing based 3D printing and oxidation sintering10.1016/j.ceramint.2023.06.210 ↗
34. A review of 3D printed porous ceramics10.1016/j.jeurceramsoc.2022.02.039 ↗
35. 3D printing of infrared transparent ceramics via material extrusion
36. The applications and latest progress of ceramic 3D printing10.1016/j.amf.2024.200113 ↗
37. Direct ink writing of aluminium oxynitride (AlON) transparent ceramics from water-based slurries10.1016/j.ceramint.2021.12.014 ↗
38. Preparation of Mn–Zn ferrite ceramic using stereolithography 3D printing technology10.1016/j.ceramint.2021.11.248 ↗
39. Fabrication of alumina ceramics with functional gradient structures by digital light processing 3D printing technology10.1016/j.ceramint.2021.12.275 ↗
40. Additive manufacturing of graded B4C-Al cermets with complex shapes10.1016/j.matdes.2020.108516 ↗
41. Yan · 2021 · 39
42. Mechanical properties of three-dimensional functionally graded triply periodic minimum surface structures10.1016/j.ijmecsci.2023.108118 ↗
43. Morphological and mechanical characterisation of three-dimensional gyroid structures fabricated by electron beam melting for the use as a porous biomaterial10.1016/j.jmbbm.2021.104882 ↗
44. Mechanical properties of Al2O3 and Al2O3/Al with Gyroid structure obtained by stereolithographic additive manufacturing and melt infiltration10.1016/j.ceramint.2022.04.283 ↗
45. Mechanical properties of energy-absorbing structures with triply periodic minimal surface topology10.1016/j.actaastro.2017.12.034 ↗
46. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review
47. Parametric design and evaluation of TPMS-like cellular solids10.1016/j.matdes.2022.110908 ↗
48. Liu
49. Effects of powder morphology on stereolithography additive manufactured Al2O3 ceramic10.1016/j.jmrt.2024.01.075 ↗
50. The influence of particle surface oxidation treatment on microstructure and mechanical behavior of 3D-SiCp/A356 interpenetrating composites fabricated by pressure infiltration technique10.1016/j.jmrt.2023.05.118 ↗
51. 3D printing and modelling of continuous carbon fibre reinforced composite grids with enhanced shear modulus10.1016/j.engstruct.2023.116165 ↗
52. Crashworthiness and failure analyses of FRP composite tubes under low velocity transverse impact