journal article·2020-09Open access

Effect of silica nano-materials on the viscosity of ethylene glycol: an experimental study by considering sonication duration effect

Sara Rostami, Rasool kalbasi, Roya Jahanshahi, Cong Qi, Salman Abbasian-Naghneh, Aliakbar Karimipour

Abstract

In this study, the effects of incorporating of SiO2 nanoparticles into the ethylene glycol on the viscosity were examined. Many samples were prepared by two-step method to investigate the effects of temperature (5–65 ℃), mass fraction (0.005−5 wt.%), shear rate (3–110 1s) and sonication time (15−60 min) on viscosity. Rheological analysis revealed that despite the EG Newtonian behavior, it was found that SiO2/EG conforms to the non-Newtonian shear-thinning model. However, as the shear rate raised, the behavior tends to Newtonian. For all samples, the viscosity of SiO2/EG was higher than EG viscosity. At higher temperature as well as mass fraction and the lowest shear rate, the maximum intensification in viscosity was reported to be 133.7%. The sonication energy diminishes clustering length and consequently reduces the viscosity. It was found that the increase in sonication time from 15 min to 60 min, diminished the viscosity up to 14%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surfactants and Colloidal Systems · Coagulation and Flocculation Studies · Rheology and Fluid Dynamics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Risk-based stochastic scheduling of energy hub system in the presence of heating network and thermal energy management10.1016/j.applthermaleng.2019.113825 ↗
2. Exergoeconomic optimization of a new double-flash geothermal-based combined cooling and power (CCP) system at two different cooling temperatures assisted by boosters10.1016/j.jclepro.2020.120921 ↗
3. Risk and profit-based bidding and offering strategies for pumped hydro storage in the energy market10.1016/j.jclepro.2020.120715 ↗
4. The multiple selections of fostering applications of hydrogen energy by integrating economic and industrial evaluation of different regions10.1016/j.ijhydene.2019.07.089 ↗
5. Effect of different surfactants on the pool boiling heat transfer of SiO2/deionized water nanofluid on a copper surface10.1016/j.ijthermalsci.2019.105977 ↗
6. Energetic analysis of an air handling unit combined with enthalpy air-to-air heat exchanger10.1007/s10973-019-09158-9 ↗
7. Solutions for enhancement of energy and exergy efficiencies in air handling units10.1016/j.jclepro.2020.120565 ↗
8. Simultaneous effects of heterogeneous-homogeneous reactions in peristaltic flow comprising thermal radiation: Rabinowitsch fluid model10.1016/j.jmrt.2020.01.089 ↗
9. Utilization of modified Darcy’s law in peristalsis with a compliant channel: applications to thermal science10.1016/j.jmrt.2020.03.087 ↗
10. Thermal and species transportation of Eyring-Powell material over a rotating disk with swimming microorganisms: applications to metallurgy10.1016/j.jmrt.2020.03.082 ↗
11. Incorporating novel heat recovery units into an AHU for energy demand reduction-exergy analysis10.1007/s10973-019-09060-4 ↗
12. Experimental investigation on a thermal model for a basin solar still with an external reflector10.3390/en10010018 ↗
13. Effects of temperature and nanoparticles concentration on rheological behavior of Fe3O4–Ag/EG hybrid nanofluid: an experimental study10.1016/j.expthermflusci.2016.04.007 ↗
14. Effect of poly ethylene glycol (PEG) as surfactant on cerium doped ZnS nanoparticles10.1016/j.jmrt.2014.04.001 ↗
15. Electrochemical corrosion study of Mg–Al–Zn–Mn alloy in aqueous ethylene glycol containing chloride ions10.1016/j.jmrt.2016.04.003 ↗
16. Impact of Cattaneo-Christov model on Darcy–Forchheimer flow of ethylene glycol base fluid over a moving needle10.1016/j.jmrt.2020.02.041 ↗
17. Stability analysis and multiple solution of Cu–Al2O3/H2O nanofluid contains hybrid nanomaterials over a shrinking surface in the presence of viscous dissipation10.1016/j.jmrt.2019.10.071 ↗
18. Experimental study on thermal conductivity of ethylene glycol containing hybrid nano-additives and development of a new correlation10.1016/j.applthermaleng.2016.09.024 ↗
19. Designing an artificial neural network to predict thermal conductivity and dynamic viscosity of ferromagnetic nanofluid10.1016/j.icheatmasstransfer.2015.06.013 ↗
20. An experimental study on the thermal conductivity of new antifreeze containing copper oxide and graphene oxide nano-additives10.1016/j.powtec.2019.01.055 ↗
21. Improving the thermal conductivity of paraffin by incorporating MWCNTs nanoparticles
22. Experimental investigation and simulation of flow boiling of nanofluids in different flow directions10.1016/j.physe.2016.10.026 ↗
23. Sensitivity of adhesive and cohesive intermolecular forces to the incorporation of MWCNTs into liquid paraffin: experimental study and modeling of surface tension10.1016/j.molliq.2020.113235 ↗
24. Molecular dynamics simulation of water–copper nanofluid flow in a three-dimensional nanochannel with different types of surface roughness geometry10.1016/j.molliq.2020.113222 ↗
25. "Competition between intermolecular forces of adhesion and cohesion in the presence of graphene nanoparticles: Investigation of graphene nanosheets/ethylene glycol surface tension10.1016/j.molliq.2020.113329 ↗
26. Efficacy of hybrid nano-powder presence on the thermal conductivity of the engine oil: an experimental study10.1016/j.powtec.2020.05.004 ↗
27. Comparison of Nusselt number and stream function in tall and narrow enclosures in the mixed convection of hybrid nanofluid
28. Rheological behavior of hybrid MWCNTs-TiO2/EG nanofluid: a comprehensive modeling and experimental study10.1016/j.molliq.2020.113058 ↗
29. Measurement of the viscosity coefficient of an ethylene glycol-based nanofluid with silicon-dioxide particles10.1134/S1028335813050042 ↗
30. Rheological properties of nanofluids flowing through microchannels10.1063/1.2821117 ↗
31. Dependence of nanofluid viscosity on particle size and pH value10.1088/0256-307X/26/6/066202 ↗
32. Physics and mechanics of heat exchange processes in nanofluid flows10.1134/S1029959916030085 ↗
33. The relationship between particle aggregation and rheology in mixed silica–titania suspensions10.1016/S1385-8947(98)00105-3 ↗
34. Structure and rheology of SiO2 nanoparticle suspensions under very high shear rates10.1103/PhysRevE.80.051403 ↗
35. Rheology of mineral oil-SiO2 nanofluids at high pressure and high temperatures10.1016/j.ijthermalsci.2013.10.016 ↗
36. Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2 (20–80)-SAE40 hybrid nano-lubricant10.1016/j.icheatmasstransfer.2016.05.015 ↗
37. An experimental study on rheological behavior of non-Newtonian hybrid nano-coolant for application in cooling and heating systems10.1016/j.expthermflusci.2016.03.015 ↗
38. Evaluation of rheological behavior of 10W40 lubricant containing hybrid nano-material by measuring dynamic viscosity10.1016/j.physe.2017.05.011 ↗
39. Müller RH, Hildebrand GE, Zetapotential und Partikelladung in der Laborpraxis(Einführung in die Theorie praktische Messdurchführung Dateninterpretation), Paperback APV, 1996.
40. Thermal, conductivity, density, viscosity, and Prandtl‐numbers of ethylene glycol‐water mixtures10.1002/bbpc.19840880813 ↗