Study on microstructure evolution of Ti–6Al–3Nb–2Zr–1Mo alloy with bimodal structure during hot compression in the near β region
Source abstract
Abstract
Hot compression tests were performed different reductions on Ti–6Al–3Nb–2Zr–1Mo alloy with bimodal structure in the near β phase region to investigate the microstructure evolution. The stress–strain curves showed obvious flow softening. With the increase of deformation strain, the alloy gradually undergoes dynamic recrystallization (DRX). Simultaneously, the thickness of lamellar αs grains significantly decreases. The high-density dislocation area provides a suitable place for β grains nucleation. Subsequently, β grains grow in lamellar α grains and become approximately 60° with the lamellar α grains under the driving force of the dislocation. The calculated DRX critical true strain of the alloy deformed at 0.01 s−1 and 980 °C is 0.095. Discontinuous dynamic recrystallization (DDRX) is the main DRX mechanism, while continuous dynamic recrystallization (CDRX) is the assistant DRX mechanism. In addition, the twin boundaries provides opportune locations for the nucleation of DRX grains, thereby promoting the DRX of the alloy. Moreover, the initial texture disappears, and different new texture components appear during hot deformation. The texture density first increases with increased deformation strain. With the further increase of deformation strain, the texture density gradually decreases, due to the combined action of sufficient DRX and dynamic phase transformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Effect of annealing on microstructure and tensile properties of skew hot rolled Ti–6Al–3Nb–2Zr–1Mo alloy tube10.1016/j.msea.2019.138346 ↗
3. Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near β-Ti alloys during hot deformation10.1016/j.msea.2019.05.015 ↗
4. An experimental study of deformation mechanism and microstructure evolution during hot deformation of Ti–6Al–2Zr–1Mo–1V alloy10.1016/j.matdes.2012.09.045 ↗
5. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy10.1016/j.msea.2016.10.095 ↗
6. Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy10.1016/j.msea.2015.03.071 ↗
7. Transformation softening in three titanium alloys10.1016/j.matdes.2016.10.039 ↗
8. Flow behavior and microstructure in Ti–6Al–4V alloy with an ultrafine-grained α-single phase microstructure during low-temperature-high-strain-rate superplasticity10.1016/j.matdes.2014.05.045 ↗
9. Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I hot rolling in alpha + beta phase field10.1007/s11661-013-1672-4 ↗
10. Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing10.1016/j.actamat.2011.03.037 ↗
11. Microstructure and texture evolution of a near-α titanium alloy during hot deformation10.1016/j.msea.2012.11.064 ↗
12. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
13. Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy10.1016/j.jallcom.2019.02.302 ↗
14. Characterization of hot workability for a near alpha titanium alloy by integrating processing maps and constitutive relationship10.1002/adem.201801232 ↗
15. Microstructure and mechanical behavior of hot compressed Ti–6V–6Mo–6Fe–3Al10.1016/j.msea.2015.04.047 ↗
16. Dynamic transformation during the high temperature deformation of two-phase titanium alloys10.1016/j.msea.2019.138047 ↗
17. Substructure and texture evolution and flow behavior of TA15 titanium alloy compressed in the alpha + beta two-phase field10.1016/j.jmatprotec.2013.05.020 ↗
18. The variation of microstructures, textures and mechanical properties from edge to center in cross section of Ti6242s titanium alloy10.1016/j.vacuum.2018.09.046 ↗
19. The effect of β phase on microstructure and texture evolution during thermomechanical processing of α+β Ti alloy10.1016/j.actamat.2013.02.008 ↗
20. Deformation behavior of TC17 titanium alloy with basketweave microstructure during isothermal compression10.1016/j.jallcom.2017.10.001 ↗
21. Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti6510.1016/j.jmst.2020.02.026 ↗
22. Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium10.1016/j.scriptamat.2017.02.022 ↗
23. Evolution of microstructure and texture of a near α titanium alloy during forging bar into disk10.1016/j.jallcom.2020.154750 ↗
24. A review of strain analysis using Electron backscatter diffraction10.1017/S1431927611000055 ↗
25. Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation10.1016/j.msea.2020.139537 ↗
26. EBSD analysis of hot deformation behavior of Cu-Ni-Co-Si-Cr alloy10.1016/j.matchar.2020.110656 ↗
27. T ensile deformation behavior of a near-α titanium alloy Ti-6Al-2Zr-1Mo-1V under a wide temperature range10.1016/j.jmrt.2020.01.016 ↗
28. Dynamic transformation of deformed austenite at temperatures above the Ae310.1016/j.pmatsci.2016.04.004 ↗
29. Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α+β region10.1016/j.msea.2019.138851 ↗
30. Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain10.1016/j.jmst.2019.08.005 ↗
31. Dynamic recrystallization kinetics of a powder metallurgy Ti–22Al–25Nb alloy during hot compression10.1016/j.msea.2014.04.062 ↗
32. Constitutive analysis and dynamic recrystallization behavior of as-cast 40CrNiMo alloy steel during isothermal compression10.1016/j.jmrt.2019.12.025 ↗
33. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
34. Initiation of dynamic recrystallization in constant strain rate hot deformation10.2355/isijinternational.43.684 ↗
35. Hot deformation behavior of a medium carbon microalloyed steel10.1016/j.msea.2011.01.098 ↗
36. Dynamic recrystallization behavior of GH4169G alloy during hot compressive deformation10.1016/j.jmst.2019.04.018 ↗
37. Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation10.1016/j.matchar.2020.110281 ↗
38. Dynamic recrystallization behavior and interfacial bonding mechanism of 14Cr ferrite steel during hot deformation bonding10.1016/j.jmst.2020.01.010 ↗
39. An investigation of dynamic recrystallization behavior of ZK60-Er magnesium alloy10.1016/j.msea.2014.06.058 ↗
40. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
41. Survey of computed grain boundary properties in face-centered cubic metals: I. Grain boundary energy10.1016/j.actamat.2009.04.007 ↗
42. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
43. Microstructure/texture evolution maps to optimize hot deformation process of near-α titanium alloy10.1016/j.pnsc.2020.01.004 ↗
44. X-ray line-broadening analysis of deformation mechanisms during rolling of commercial-purity titanium10.1016/j.actamat.2003.10.025 ↗
45. Interaction among deformation, recrystallization and phase transformation of TA2 pure titanium during hot compression10.1016/S1003-6326(16)64302-9 ↗