Parametric optimization of electric discharge machining of Ni 55.65Ti based shape memory alloy using NSGA II with TOPSIS
Source abstract
Abstract
Nickel-Titanium based shape memory alloys (SMAs) are a unique category of smart materials that possess remarkable properties like super-elasticity, shape memory effect, high wear and corrosion resistance, thereby rendering them appropriate for uses such as composite structures, aerospace, and biomedical uses etc. These distinctive features make these alloys ‘difficult in machining’ using the traditional approach of machining process. In the present investigation, machinability aspects of Ni55.65Ti-SMAs using non-traditional electric discharge machining process has been studied. The effect of input process parameters i.e., pulse time ON, duty factor, peak current on the surface roughness and material removal rate has been investigated. The output responses viz. minimum surface roughness along with maximum material removal rate having values of 6.828μm and 4.552 mm3/sec respectively were achieved. Furthermore, empirical modelling and ANOVA study have been executed based on the full factorial design analysis. The non-dominated sorting genetic algorithm IIalgorithm IIalg2 commonly known as NSGA II, used crowding distance approach for multi-objective process optimization. The results obtained with NSGA-II were again ranked using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach to give a more thorough understanding of the solution space and opt for the best possible solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Shape Memory Alloy Transformations · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Crystal structures and shape-memory behaviour of NiTi10.1038/nmat884 ↗
2. Cadmium-gold alloys solid10.1021/ja01349a004 ↗
3. Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi10.1063/1.1729603 ↗
4. A novel heterogeneous multi-wire indirect arc directed energy deposition for in-situ synthesis Al-Zn-Mg-Cu alloy: process, microstructure and mechanical properties
5. Developing a Mg alloy with ultrahigh room temperature ductility via grain boundary segregation and activation of non-basal slips10.1016/j.ijplas.2023.103548 ↗
6. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
7. Molecular dynamics simulation and experimental study of tin growth in SAC lead-free microsolder joints under thermo-mechanical-electrical coupling
8. Dynamic growth mechanism of tin whisker driven by compressive stress under thermal-mechanic-electric-diffusion coupling10.1016/j.vacuum.2023.112299 ↗
9. Molecular level manipulation of charge density for solid-liquid TENG system by proton irradiation10.1016/j.nanoen.2022.107819 ↗
10. Towards applications , processing and advancements in shape memory alloy and its composites10.1016/j.jmapro.2020.09.048 ↗
11. Microstructure evolution and deformation behavior during stretching of a compositionally inhomogeneous TWIP-TRIP cantor-like alloy by laser powder deposition10.1016/j.msea.2022.143319 ↗
12. Effect of cutting parameters on the corrosion resistance of 7A04 aluminum alloy in high speed cutting10.1016/j.vacuum.2023.111968 ↗
13. Ultrasonic welding of AZ31B magnesium alloy and pure copper: microstructure, mechanical properties and finite element analysis10.1016/j.jmrt.2023.01.095 ↗
14. High-temperature solid particle erosion characteristics and damage mechanism of AlxCoCrFeNiSi high-entropy alloy coatings prepared by laser cladding10.1016/j.intermet.2023.107939 ↗
15. Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys
16. Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study10.1016/j.jmrt.2023.01.057 ↗
17. Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: a phase-field study
18. A review on shape memory alloy reinforced polymer composite materials and structures
19. Wing morphing control with shape memory alloy actuators10.1177/1045389X12471866 ↗
20. Tool wear progression of PCD and PCBN cutting tools in high speed machining of NiTi shape memory alloy under various cutting speeds
21. Biomedical applications of shape memory alloys10.1155/2011/501483 ↗
22. Review on effect of Ti-alloy processing techniques on surface-integrity for biomedical application10.1080/10426914.2020.1748195 ↗
23. Shape memory alloy-based sensor for two-phase flow detection10.1109/JSEN.2020.3008191 ↗
24. Development and control of a multifunctional prosthetic hand with shape memory alloy
25. MEMS applications of NiTi based shape memory alloys: a review10.2174/1876402908666161102151453 ↗
26. Recent advances in multicomponent NiTi-based shape memory alloy using metallic glass as a precursor10.1016/j.pmatsci.2020.100756 ↗
27. Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: modeling and applications10.1016/j.actamat.2018.08.008 ↗
28. Cooperative effect of strength and ductility processed by thermomechanical treatment for Cu–Al–Ni alloy10.1016/j.msea.2022.143485 ↗
29. Core-shell structure nanoprecipitates in Fe-xCu-3.0Mn-1.5Ni-1.5Al alloys: a phase field study10.1016/j.pnsc.2022.04.001 ↗
30. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy
31. Discontinuous dynamic recrystallization and nucleation mechanisms associated with 2-, 3- and 4-grain junctions of polycrystalline nickel-based superalloys10.1016/j.matdes.2023.112041 ↗
32. Effects of Ni-decorated reduced graphene oxide nanosheets on the microstructural evolution and mechanical properties of Sn-3.0Ag-0.5Cu composite solders10.1016/j.intermet.2022.107683 ↗
33. Investigation of welding crack in micro laser welded NiTiNb shape memory alloy and Ti6Al4V alloy dissimilar metals joints10.1016/j.optlastec.2016.12.028 ↗
34. Lagoudas · 2008
35. Otsuka · 1998
36. A review of shape memory alloy research , applications and opportunities10.1016/j.matdes.2013.11.084 ↗
37. The story of nitinol: the serendipitous discovery of the memory metal and its applications
38. A review on the machining of nickel-titanium shape memory alloys
39. Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler10.1016/j.msea.2019.138545 ↗
40. Jointing of CFRP/5083 aluminum alloy by induction brazing: processing, connecting mechanism, and fatigue performance10.3390/coatings12101559 ↗
41. Probabilistic framework for fatigue life assessment of notched components under size effects10.1016/j.ijmecsci.2020.105685 ↗
42. Size effect in fatigue modelling of defective materials: application of the calibrated weakest-link theory10.1016/j.ijfatigue.2022.107213 ↗
43. A review of research progress on dissimilar laser weld-brazing of automotive applications,
44. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron10.1016/j.jallcom.2019.151925 ↗
45. Turning and drilling of NiTi shape memory alloys10.1016/S0007-8506(07)60646-5 ↗
46. Machining NiTi micro-parts by micro-milling10.1016/j.msea.2006.10.220 ↗
47. Review of the machining difficulties of nickel-titanium based shape memory alloys10.4028/www.scientific.net/AMM.564.533 ↗
48. The wire electro-discharge machining characteristics of TiNi shape memory alloys10.1615/HighTempMatProc.v4.i4.20 ↗
49. Significance of alloying elements on the mechanical characteristics of Mg-based materials for biomedical applications10.3390/cryst12081138 ↗
50. Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures
51. Sustainable and smart metal forming manufacturing processes10.1016/j.matpr.2020.12.177 ↗
52. A review on pore and porosity in tissue engineering10.1016/j.matpr.2020.12.661 ↗
53. Saxena · 2012 · vol. 38 · 2347
54. Machining of NiTi-shape memory alloys-A review10.1080/10910344.2017.1365894 ↗
55. A review on machining of NiTi shape memory alloys: the process and post process perspective10.1007/s00170-018-2818-8 ↗
56. Laser welding of NiTi shape memory alloy: a review10.1016/j.jmapro.2017.11.011 ↗
57. Surface integrity aspects for NiTi shape memory alloys during wire electric discharge machining: a review10.1557/jmr.2020.32 ↗
58. Pelton · 2011 · vol. 20 · 613
59. M. H. Abidi, A. M. Al-ahmari, and A. N. Siddiquee, “An investigation of the micro-electrical discharge machining of nickel-titanium shape memory alloy using grey relations coupled with principal,” vol. vol. 2, pp. 1–15, doi: 10.3390/met7110486.10.3390/met7110486 ↗
60. Basavarajappa · Wire Electro Discharge Machining Performance of TiNiCu Shape Memory Alloy · 2016 · 467
61. The effects of laser forming on NiTi superelastic shape memory alloys10.1115/1.4000309 ↗
62. Journal of Materials Processing Technology Pulsed Nd : YAG laser cutting of NiTi shape memory alloys — influence of process parameters10.1016/j.jmatprotec.2010.07.004 ↗
63. Achieving small structures in thin NiTi sheets for medical applications with water jet and micro machining: a comparison10.1007/s11665-010-9789-8 ↗
64. CIRP Annals - manufacturing Technology on geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys10.1016/j.cirp.2013.03.021 ↗
65. Shape-memory topographies on nickel–titanium alloys trained by embossing and pulse electrochemical machining10.1002/adem.201600012 ↗
66. A review on current research trends in electrical discharge machining (EDM)10.1016/j.ijmachtools.2006.08.026 ↗
67. Electrical Discharge Machining (EDM) of nickel-based nimonic alloys: a review
68. Surface modification by electrical discharge machining: a review10.1016/j.jmatprotec.2008.09.032 ↗
69. A prototype micro-thermoelectric power generator for micro-electromechanical systems10.1063/1.4870260 ↗
70. Smart sensor network based high quality air pollution monitoring system using labview10.3991/ijoe.v13i08.7161 ↗
71. A review on mechanical properties of epoxy nanocomposites10.1016/j.matpr.2020.09.742 ↗
72. Vibration analysis of multi-walled carbon nanotubes embedded in elastic medium” Front10.1007/s11709-014-0247-9 ↗
73. Biowaste-originated heteroatom-doped porous carbonaceous material for electrochemical energy storage application10.1016/j.jiec.2021.03.037 ↗
74. Mechanical behaviour of Aluminium Alloy AA6063 processed through ECAP with optimum die design parameters
75. Modelling and simulation for fabrication of 3D printed polymeric porous tissue scaffolds
76. Peak stress studies of hot compressed TiHy 600 alloy10.1016/j.matpr.2017.07.066 ↗
77. Processing and advancements in the development of thermal barrier coatings: a review10.3390/coatings12091318 ↗
78. Optimization of surface roughness in EDM of pure magnesium (Mg) using TLBO 2019 Materials
79. Effect of nanoparticles in cutting fluid for structural machining of Inconel 718
80. Surface modification and machining of TiNi/TiNb-based alloys by electrical discharge machining10.1007/s00170-015-8257-x ↗
81. Electrical discharge machining characteristics of nickel-titanium shape memory alloy based on full factorial design10.1177/1045389X13476147 ↗
82. Magabe · 2019 · 1703
83. Surface integrity analysis of Nitinol-60 shape memory alloy in WEDM10.1080/10426914.2019.1628256 ↗
84. Experimental investigation & optimisation of wire electrical discharge machining process parameters for Ni49Ti51 shape memory alloy10.1016/j.jksues.2020.01.003 ↗
85. Pareto optimization of WEDM process parameters for machining a NiTi shape memory alloy using a combined approach of RSM and heat transfer search algorithm10.1007/s40436-019-00267-0 ↗
86. Optimization of process parameters of wire electro discharge machining for Ti49.4Ni50.6 shape memory alloys using the Taguchi technique10.1108/IJSI-10-2018-0058 ↗
87. Wire electrical discharge machining characteristics of nitinol-60 shape memory alloy10.1016/j.matpr.2020.03.418 ↗
88. Optimisation of WEDM parameters on Nitinol alloy using RSM and desirability approach
89. An experimental study of influence of wire electro discharge machining parameters on surface integrity of TiNiCo shape memory alloy10.1557/jmr.2017.137 ↗
90. Optimization of material removal rate during electrical discharge machining of cryo-treated NiTi alloys using Taguchi's method10.1016/j.jksues.2016.04.003 ↗
91. Space group and crystal structure of the R-phase in binary NiTi shape memory alloys10.1016/j.actamat.2006.02.040 ↗
92. Fatiha · 2002 · vol. 3 · 91
93. D.C. Montgomery, Design and analysis of experiments ed. .
94. Machining parameter optimization and experimental investigations of nano-graphene mixed electrical discharge machining of nitinol shape memory alloy10.1016/j.jmrt.2022.05.076 ↗
95. U · 2019
96. Xu · 2019
97. Vo-Duy · 2017
98. Application of NSGA II for optimization of multi-performance characteristics during machining of GFRP (epoxy) composites10.1016/j.matpr.2015.07.298 ↗
99. J. H. Holland, “Genetic algorithms and adaptation, 2015,” pp. 317–333.10.1007/978-1-4684-8941-5_21 ↗
100. Deb · 2002 · 6 · 182