Effects of small pre-stretching on the microstructural evolution and strengthening of an Al–Cu–Mg–Ag alloy
Source abstract
Abstract
Pre-stretching prior to aging is known to degrade the performance of Al-Cu-Mg-Ag alloys at elevated temperatures. In this work, small pre-stretching by 0.5% and 1.8% is selected to explore its potential influences on the microstructure and strengthening capacity of an Al-Cu-Mg-Ag alloy. The strength and microstructure of Al-Cu-Mg-Ag alloy are found to be sensitive to the pre-stretching. Even 0.5% pre-stretching can reduce the alloy strength by more than 10MPa. Quantitative transmission electron microscopy (TEM) and atom probe tomography (APT) analysis indicate that this detrimental effect of pre-stretching on strength is directly associated with the suppressed Mg-Ag co-clustering, which greatly delays the Ω precipitation and induces a weaker strengthening effect. Quantitative calculation reveals that Mg-Ag co-clusters exhibit the greatest strengthening contribution to the yield strength of the underaged material because of its strongest cluster hardening, which is mainly originated from its order hardening capacity. As the pre-stretching increases from 0.5% to 1.8%, the θ coarsening is progressively intensified during exposing at 200°C, accompanied by a gradual drop in the number density of Ω phase. Besides, the formation of a cubic σ phase is found to be considerably enhanced after exposing at 200°C for 500h as the pre-stretching increases.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Nucleation of precipitates in aged Al-Cu-Mg-(Ag) alloys with high Cu:Mg ratios10.1016/1359-6454(95)00314-2 ↗
2. Alloy development for the enhanced stability of Ω precipitates in Al-Cu-Mg-Ag alloys10.1007/s11661-006-1079-6 ↗
3. Microstructure and mechanical properties of Al-Cu-Mg-Mn-Zr alloy with trace amounts of Ag10.1016/j.msea.2009.06.042 ↗
4. Effect of aging route on the precipitation behavior and thermal stability of Al-Cu-Mg-Ag alloy10.1016/j.jmrt.2023.01.140 ↗
5. Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy10.1016/j.msea.2019.06.021 ↗
6. Design and development of an experimental wrought aluminum alloy for use at elevated temperatures10.1007/BF02628387 ↗
7. Enhancing the tensile strength and heat resistance induced by high-density Ω phases in an Al-Cu-Mg-Ag alloy10.1016/j.jmrt.2022.04.015 ↗
8. Evolution of Ω phase in an Al-Cu-Mg-Ag alloy: a three-dimensional atom probe study10.1016/S1359-6454(98)00280-8 ↗
9. Effects of Ag variations on the microstructures and mechanical properties of Al-Cu-Mg alloys at elevated temperatures10.1016/j.msea.2014.05.065 ↗
10. High cyclic fatigue performance of Al-Cu-Mg-Ag alloy under T6 and T840 conditions10.1016/S1003-6326(17)60142-0 ↗
11. Pre-precipitate clustering in an Al-Cu-Mg-Ag alloy10.1016/0956-716X(94)90184-8 ↗
12. Reversion of natural ageing and restoration of quick bake-hardening response in Al-Zn-Mg-Cu alloy10.1016/j.jmst.2021.03.070 ↗
13. Effect of cold rolling pre-deformation on microstructure and properties of V-1469 Al-Li alloy10.1016/j.jmrt.2020.06.028 ↗
14. Solute clusters-promoted strength-ductility synergy in Al-Sc alloy10.1016/j.jmst.2021.02.075 ↗
15. Three dimensional atom probe analysis of pre-precipitate clustering in an Al-Cu-Mg-Ag alloy10.1016/S1359-6462(98)00027-X ↗
16. Mg-controlled formation of Mg-Ag co-clusters in initial aged Al-Cu-Mg-Ag alloys10.1016/j.jallcom.2014.03.008 ↗
17. Atom probe tomography study of Mg-dependent precipitation of Ω phase in initial aged Al-Cu-Mg-Ag alloys10.1016/j.msea.2015.04.052 ↗
18. Effect of aging temper on the thermal stability of Al-Cu-Mg-Ag heat-resistant alloy10.1016/j.matdes.2012.10.039 ↗
19. Mechanical properties and corrosion resistance of Al-Cu-Mg-Ag heat-resistant alloy modified by interrupted aging10.1016/j.jallcom.2015.10.094 ↗
20. Influence of cold deformation on the aging behaviour of Al-Cu-Si-Mg alloy10.1016/S1005-0302(11)60048-0 ↗
21. Effect of pre-deformation on microstructures and mechanical properties of high purity Al-Cu-Mg alloy10.1016/S1003-6326(16)64253-X ↗
22. Influences of pre-rolling deformation on aging precipitates and mechanical properties for a novel Al-Cu-Li alloy10.1016/j.jmrt.2021.09.063 ↗
23. Effects of pre-deformation mode and strain on creep aging bend-forming process of Al-Cu-Li alloy10.1016/S1003-6326(20)65291-8 ↗
24. Effects of cold work on precipitation in Al-Cu-Mg-(Ag) and Al-Cu-Li-(Mg-Ag) alloys10.1007/BF02670753 ↗
25. The effect of cold work on the precipitation of Ω and θ′ in a ternary Al-Cu-Mg alloy10.1007/s11661-003-0177-y ↗
26. Effect of natural aging and cold working on microstructures and mechanical properties of Al-4.6Cu-0.5Mg-0.5Ag alloy10.1007/s11661-013-1611-4 ↗
27. Quantitative study of the solute clustering and precipitation in a pre-stretched Al-Cu-Mg-Ag alloy10.1016/j.jallcom.2017.07.258 ↗
28. Effect of pre-straining on the aging behavior and mechanical properties of an Al-Cu-Mg-Ag alloy10.1016/j.msea.2014.11.094 ↗
29. The influence of preaging on the strength and precipitation behavior of a deformed Al-Cu-Mg-Ag alloy10.1016/j.jallcom.2018.06.046 ↗
30. A procedure for quantification of precipitate microstructures from three-dimensional atom probe data10.1016/S0304-3991(02)00319-4 ↗
31. The effect of Si additions on Ω precipitation in Al-Cu-Mg-(Ag) alloys10.1016/j.scriptamat.2003.09.004 ↗
32. Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys10.1179/174328005X14357 ↗
33. Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling10.1016/j.actamat.2013.08.033 ↗
34. Best-fit ellipsoids of atom-probe tomographic data to study coalescence of γ′ (L12) precipitates in Ni-Al-Cr10.1016/j.scriptamat.2007.04.020 ↗
35. Quantitative atom probe analysis of nanostructure containing clusters and precipitates with multiple length scales10.1016/j.ultramic.2010.12.029 ↗
36. Effect of artificial aging on the Cu-Mg co-clustering and mechanical behavior in a pre-strained Al-Cu-Mg alloy10.1016/j.msea.2017.09.054 ↗
37. Interactions between cadmium and multiple precipitates in an Al-Li-Cu alloy: improving aging kinetics and precipitation hardening10.1016/j.jmst.2019.11.032 ↗
38. Cluster evolution mechanisms during aging in Al-Mg-Si alloys10.1016/j.actamat.2015.09.027 ↗
39. Positron lifetime study of an Al-1.7 at.% Mg-1.1 at.% Cu alloy10.1080/09500830010018203 ↗
40. Influence of electric field on the quenched-in vacancy and solute clustering during early stage ageing of Al-Cu alloy10.1016/j.jmst.2017.07.020 ↗
41. Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy10.1016/j.jmst.2019.11.035 ↗
42. On the age-hardening of an Al-Zn-Mg-Cu alloy: a vacancy perspective10.1016/j.scriptamat.2010.08.054 ↗
43. Evolution of solute clustering in Al-Cu-Mg alloys during secondary ageing10.1016/j.actamat.2009.11.021 ↗
44. Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy10.1016/j.msea.2017.06.110 ↗
45. Stress aging of Al-Cu-Mg-Ag single crystal: the effect of the loading orientations10.1016/j.jallcom.2019.152635 ↗
46. Effects of yttrium additions on microstructures and mechanical properties of cast Al-Cu-Mg-Ag alloys10.1016/j.jallcom.2021.159435 ↗
47. On the origin of the high coarsening resistance of Ω plates in Al-Cu-Mg-Ag Alloys10.1016/S1359-6454(01)00155-0 ↗
48. Microstructural design of high-strength aluminum alloys10.1361/105497198770341734 ↗
49. Strengthening potential of the cubic σ precipitate in Al-Cu-Mg-Si alloys10.1007/BF00356599 ↗
50. The role of silicon in the formation of the (Al5Cu6Mg2) σ phase in Al-Cu-Mg alloys10.1023/A:1004767131956 ↗
51. Formation and characteristics of coarsening resistant cubic sigma phase in Al-4.2Cu-1.6Mg-0.2Si10.1179/mst.1997.13.8.655 ↗
52. A process model for age hardening of aluminium alloys-I. The model10.1016/0956-7151(90)90291-N ↗
53. Davis · 1993
54. On the role of the solute partitioning and chemistry in initial precipitation of Ω plates10.1016/j.msea.2019.138339 ↗
55. Handbook of aluminum
56. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
57. Strengthening effect of unshearable particles of finite size: a computer experimental study10.1016/S1359-6454(99)00179-2 ↗
58. Precipitation hardening10.1007/BF02670416 ↗
59. Miller · 2014
60. Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations10.1080/14786430500509054 ↗
61. Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography10.1016/j.actamat.2008.09.039 ↗
62. Precipitation hardening caused by a difference in shear modulus between particle and matrix10.1002/pssa.2210780223 ↗
63. Room temperature precipitation in quenched Al-Cu-Mg alloys: a model for the reaction kinetics and yield strength development10.1080/14786430412331333374 ↗
64. The thermodynamics of and strengthening due to co-clusters: general theory and application to the case of Al-Cu-Mg alloys10.1016/j.actamat.2009.01.021 ↗
65. A model for the thermodynamics of and strengthening due to co-clusters in Al-Mg-Si-based alloys10.1016/j.actamat.2012.04.032 ↗
66. Precipitation processes in Al-Mg-Cu alloys10.1016/S0921-5093(01)01049-8 ↗
67. Ab initio analysis of Guinier-Preston-Bagaryatsky zone nucleation in Al-Cu-Mg alloys10.1016/j.actamat.2012.03.044 ↗