Sustainable mortar reinforced with recycled glass fiber derived from pyrolysis of wind turbine blade waste
Source abstract
Abstract
Pyrolysis technology has recently made significant progress in recycling millions of tons of wind turbine waste (WTB). Short fibers represent its main product (∼70 wt%), which needs further studies to explore its future applications. In this context, this work aims to the valorization of the recycled glass fiber (rGF) derived from pyrolysis of WTB (at 550 °C) in the production of rGF-reinforced mortar composite (rGF/M) for sustainable building applications. The research began by subjecting the derived rGF to sieving (rGFs), washing (rGFw), and oxidation (rGFo) pretreatments for purification and removing any impurities, organic residues, and char particles. Afterward, the chemical degradation of the treated rGF in a strong alkaline cement solution with pH = 14 was studied for up to 90 days. In parallel, the mortar composite samples were fabricated at 1 wt% of the treated rGF batches (rGFr, rGFw, and rGFo) to study the effect of different pretreatments on their microstructure, dispersion, compressive strength, flexural strength, and water absorption capabilities behavior after different curing periods (28 and 90 days). The results showed that rGFo (7.84%) showed a lower degradation rate versus rGFw (16.41%) and rGFr (30.76%). Meanwhile, the highest curing period (90 days) contributed to improving the properties of the mortar composites in general, especially in the case of using rGFo which led to improved compressive strength (15%) and reduced absorption coefficient (38%) and cumulative water content (32%) with a uniform distribution of short fibers in the matrices and a slight increase in flexural strength compared to control mortar sample (8.6 MPa). While rGFs provides better flexural strength (9.3 MPa) with a 12% improvement. Based on these results it can be concluded that rGFo has high potential in sustainable building materials with high competition with virgin glass fiber.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · BIM and Construction Integration · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Recycling and recovery of fiber-reinforced polymer composites for end-of-life wind turbine blade management10.1039/D3GC03479H ↗
2. Wind turbine blade waste in 205010.1016/j.wasman.2017.02.007 ↗
3. The inclusion of uncertainty in circularity transition modeling: a case study on wind turbine blade end-of-life management
4. Recycling of wind turbine blades: Recent developments
5. A Comparative Life Cycle Assessment between landfilling and Co-Processing of waste from decommissioned Irish wind turbine blades10.1016/j.jclepro.2020.123321 ↗
6. Chemical recycling of carbon fiber reinforced epoxy composites using mild conditions10.1002/cite.202100048 ↗
7. Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures10.1039/C7RA07034A ↗
8. Chemical recycling of waste plastics: current challenges and perspectives10.1016/j.fmre.2023.12.023 ↗
9. Upcycling of decommissioned wind turbine blades through pyrolysis10.1016/j.jclepro.2022.134292 ↗
10. https://decomblades.dk.
11. A biomass–solar hybrid gasification system by solar pyrolysis and PV– Solid oxide electrolysis cell for sustainable fuel production10.1016/j.apenergy.2023.122419 ↗
12. Study on the mechanisms of epoxy resin gasification in supercritical water by molecular dynamics and experimental methods10.1016/j.cej.2021.133828 ↗
13. Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials10.1016/j.susmat.2021.e00382 ↗
14. Recovery of energy and carbon fibre from wind turbine blades waste (carbon fibre/unsaturated polyester resin) using pyrolysis process and its life-cycle assessment
15. In-situ pyrolysis kinetic analysis and fixed-bed pyrolysis behavior of ex-service wind turbine blades10.1016/j.wasman.2023.05.049 ↗
16. Sustainable transformation of end-of-life wind turbine blades: Advancing clean energy solutions in civil engineering through recycling and upcycling10.1016/j.jclepro.2023.139184 ↗
17. Analysis of the pyrolysis process, kinetics and products of the base components of waste wind turbine blades (epoxy resin and carbon fiber)10.1016/j.jaap.2023.105919 ↗
18. Recovery of styrene from waste wind turbine blades (fiberglass/polyester resin composites) using pyrolysis treatment and its kinetic behavior
19. Pyrolysis kinetic behaviour and thermodynamic analysis of waste wind turbine blades (carbon fibres/unsaturated polyester resin)
20. Characteristics, kinetics and product distribution on pyrolysis process for waste wind turbine blades10.1016/j.jaap.2023.105859 ↗
21. The pyrolysis of end-of-life wind turbine blades under different atmospheres and their effects on the recovered glass fibers10.1016/j.compositesb.2022.110493 ↗
22. Synthesis of value-added aromatic chemicals from catalytic pyrolysis of waste wind turbine blades and their kinetic analysis using artificial neural network
23. Phenol and benzoic acid recovery from end-of-life of polysulfone ultrafiltration membranes and its thermochemical kinetic behaviour. Energy Sources10.1080/15567036.2023.2213669 ↗
24. https://www.biogreen-energy.com/the-pyrolysis-applications-top20.
25. Co-pyrolysis of waste wind turbine blades and biomass and their kinetic analysis using artificial neural network
26. Recovery of styrene-rich oil and glass fibres from fibres-reinforced unsaturated polyester resin end-of-life wind turbine blades using pyrolysis technology
27. Research on a two-step pyrolysis-oxidation process of carbon fiber-reinforced epoxy resin-based composites and analysis of product properties10.1016/j.jece.2022.107510 ↗
28. Kinetics of dissolution of glass fibre in hot alkaline solution10.1007/s10853-017-1627-z ↗
29. Evaluating the feasibility of shredded wind turbine blades for sustainable building components10.1016/j.jclepro.2023.139867 ↗
30. Valorization of recycled FRP materials from wind turbine blades in concrete10.1016/j.resconrec.2021.105807 ↗
31. Use of waste collected from wind turbine blade production as an eco-friendly ingredient in mortars for civil construction10.1016/j.jclepro.2020.122948 ↗
32. Mechanical and material properties of mortar reinforced with glass fiber: an experimental study10.3390/ma14030698 ↗
33. Mechanical and environmental advantages of the revaluation of raw-crushed wind-turbine blades as a concrete component
34. Experimental study on mechanical property and microstructure of cement mortar reinforced with elaborately recycled GFRP fiber10.1016/j.cemconcomp.2020.103908 ↗
35. Raw-crushed wind-turbine blade: waste characterization and suitability for use in concrete production10.1016/j.resconrec.2023.107160 ↗
36. Valorization of macro fibers recycled from decommissioned turbine blades as discrete reinforcement in concrete10.1016/j.jclepro.2022.134550 ↗
37. Recycling of glass fibre reinforced polymer (GFRP) composite wastes in concrete: a critical review and cost benefit analysis10.1016/j.istruc.2023.05.018 ↗
38. Improving dispersion of recycled GFRP fiber in cement mortar with sodium hexametaphosphate10.1016/j.cemconcomp.2023.105232 ↗
39. Mechanical properties of lime-based mortars reinforced with plasma treated glass fibers10.1016/j.conbuildmat.2018.09.175 ↗
40. Effects of alkali-treated recycled carbon fiber on the strength and free drying shrinkage of cementitious mortar10.1016/j.jclepro.2019.04.295 ↗
41. Materials for wind turbine blades: an overview10.3390/ma10111285 ↗
42. Functional and microstructural alterations in hydrated and freeze–thawed cement-oil shale ash composites
43. Property assessment of an eco-friendly mortar reinforced with recycled mask fiber derived from COVID-19 single-use face masks
44. Cement substitution by sludge-biomass gasification residue: synergy with silica fume10.1016/j.conbuildmat.2022.126902 ↗
45. Structural observation of cement paste modified with hydrophobic organoclay10.1016/j.conbuildmat.2020.121931 ↗
46. A new strategy for functionalization of char derived from pyrolysis of textile waste and its application as hybrid fillers (CNTs/char and graphene/char) in cement industry10.1016/j.jclepro.2021.128058 ↗
47. Recycling of bare waste printed circuit boards as received using an organic solvent technique at a low temperature10.1016/j.jclepro.2018.03.227 ↗
48. A new industrial technology for closing the loop of full-size waste motherboards using chemical-ultrasonic-mechanical treatment
49. Separation and purification of metal and fiberglass extracted from waste printed circuit boards using milling and dissolution techniques10.1002/ep.12899 ↗
50. The effect of exposure to alkaline solution and water on the strength–porosity relationship of GFRP rebar10.1016/j.compositesb.2007.11.002 ↗
51. The durability and performance of short fibers for a newly developed Alkali-Activated binder10.3390/fib4010011 ↗
52. Short- and long-term properties of glass fiber reinforced asphalt mixtures10.1080/10298436.2019.1577421 ↗
53. Review of the present status of optical fiber sensors10.1016/S1068-5200(02)00527-8 ↗
54. Degradation behavior and ageing mechanism of E-glass fiber reinforced epoxy resin composite pipes under accelerated thermal ageing conditions. Composites. Part B
55. Mechanical properties and microstructure evaluation of cement mortar with different cement strength classes by image analysis10.1007/s13369-021-06257-4 ↗
56. A review of the implementations of glass fiber in concrete technology10.1016/j.matpr.2022.02.293 ↗
57. Mechanical characterization of recycled-PET fiber reinforced mortar composites treated with nano-SiO2 and mixed with seawater10.1016/j.conbuildmat.2023.131882 ↗
58. Functional and microstructural alterations in hydrated and freeze–thawed cement-oil shale ash composites
59. Saba · 2023 · 787
60. Crack initiation and propagation in Fiber-Glass reinforced mortars10.1007/978-3-030-72921-9_6 ↗
61. The influence of curing regimes on hydration, microstructure and compressive strength of ultra-high performance concrete: a review
62. Absorption and strength properties of short carbon fiber reinforced mortar composite10.3390/buildings11070300 ↗
63. Nanocellulose: from fundamentals to advanced applications10.3389/fchem.2020.00392 ↗
64. Exploratory study of flexural performance of mechanically recycled glass fiber reinforced polymer shreds as reinforcement in cement mortar10.1177/03611981211015246 ↗
65. Recycled glass fiber reinforced polymer composites incorporated in mortar for improved mechanical performance10.1016/j.conbuildmat.2018.07.169 ↗
66. Experimental study on mechanical property and microstructure of cement mortar reinforced with elaborately recycled GFRP fiber10.1016/j.cemconcomp.2020.103908 ↗
67. The effects of replacing sand with glass fiber-reinforced polymer (GFRP) waste on the mechanical properties of cement mortars10.3390/eng5010014 ↗
68. Effect of alkali-resistant glass fiber and silica fume on mechanical and shrinkage properties of cement-based mortars10.1016/j.conbuildmat.2021.125054 ↗
69. The windfall of green finance: advancing environmental sustainability through wind energy
70. Pyrolysis self-activation: an environmentally friendly method to transform biowaste into activated carbon for arsenic removal10.1016/j.biortech.2022.128353 ↗
71. Green and durable engineered cementitious composites (GD-ECC) with recycled PE fiber, desert sand, and carbonation curing: mixture design, durability performance, and life-cycle analysis10.1016/j.conbuildmat.2024.134984 ↗
72. Green and durable engineered cementitious composites (GD-ECC) with recycled PE fiber, desert sand, and carbonation curing: mixture design, durability performance, and life-cycle analysis10.1016/j.conbuildmat.2024.134984 ↗