journal article·2024-07Open access

The phase transformation and enhancing mechanical properties in high Zn/Mg ratio Al–Zn–Mg–Cu(-Si) alloys

Yi Lu, Shengping Wen, Kunyuan Gao, Xiangyuan Xiong, Wu Wei, Xiaolan Wu, Hui Huang, Zuoren Nie

Abstract

Aging behavior and phase transformation of Al–5Zn–1Mg–1Cu(-Si) alloys under different isothermal temperatures were investigated using transmission electron microscope (TEM) and mechanical tests. The aging temperature and Si addition significantly influenced to the types of precipitated phases and mechanical properties of the Al–Zn–Mg–Cu alloys. Adding Si in this alloy changed the precipitated phases from T′ and η′ phases to the dual-sized η and GPB-II phases. With increasing isothermal aging temperature, more GPB-II phases formed in alloys with the same composition, effectively improving the microhardness and mechanical properties. When aging at 150 °C, 0.5 wt%Si-containing alloy reached the highest peak hardness of about 150HV and maintained stable hardness, while an alloy without Si only reached 120HV and later declined by 15HV. The tensile strength and yield strength of the 0.5 wt%Si-containing alloy were higher than those of non-Si alloy by 132 MPa and 165 MPa, increasing 51% and 90%, respectively. This result was due to the presence of fine and dispersed 4–8 nm GPB-II phases in 0.5 wt%Si-containing alloy. The GPB-II phase had a core-shell structure, with the core region mainly enriched in Mg and Si, and the shell region mainly enriched in Cu and Zn. Compared with the stability of T′ and η′ phases, this core-shell structure of GPB-II effectively inhibited its growth and beneficially maintained a smaller-sized GPB-II phase. The strengthening effect of GPB-II phase was better than that of η or T phases when aging at 150 °C or 200 °C. The mechanical properties of high Zn/Mg ratios Al–Zn–Mg–Cu alloys can enhanced by adding Si.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Abnormal fracture of 7085 high strength aluminum alloy thick plate joint via friction stir welding[J]10.1016/j.jmrt.2019.09.077 ↗
2. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective[J]10.1016/j.jallcom.2018.11.286 ↗
3. Microstructure, tensile properties and fracture behavior of an Al-Cu-Mg alloy 2124[J]10.1007/BF01166019 ↗
4. Influences of pre-rolling deformation on aging precipitates and mechanical properties for a novel Al–Cu–Li alloy[J]10.1016/j.jmrt.2021.09.063 ↗
5. Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al -Cu-Li alloy[J]10.1016/j.msea.2021.141682 ↗
6. A high-strength aluminium-based alloy with advanced superplasticity10.1016/j.jallcom.2014.02.061 ↗
7. Trace element effects on precipitation processes and mechanical properties in an Al-Cu-Li alloy[J]10.1007/s11661-997-0203-6 ↗
8. Effect of Ag on age-hardening response of Al-Zn-Mg-Cu alloys[J]10.1016/j.msea.2019.03.090 ↗
9. Effects of Zr addition on solidification characteristics of Al-Zn-Mg-Cu alloy using thermal analysis[J]10.1007/s10973-018-7426-1 ↗
10. The formation of new (Al, Zn)3Zr precipitates in an Al–Zn–Mg–Cu aluminum alloy after aging treatment and their response to dynamic compression[J]
11. Effect of Sc on aging kinetics in a direct Chill cast Al-Zn-Mg-Cu alloy[J]10.1007/s11661-008-9485-6 ↗
12. Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy[J]10.1007/s11771-022-4979-8 ↗
13. Effect of cerium addition on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J]10.1007/s12666-009-0090-1 ↗
14. Study on phases formation and modification ability of rare earth elements La, Ce, Sm and Er in Al–Zn–Mg–Cu–Zr alloy[J]10.1007/s12666-021-02337-z ↗
15. Search for promising compositions for developing new multiphase casting alloys based on Al-Zn-Mg matrix using thermodynamic calculations and mathematic simulation10.1134/S0031918X13120107 ↗
16. The effects of yttrium and erbium on the phase composition and aging of the Al–Zn–Mg–Cu–Zr alloy with a high copper content10.1134/S0031918X22060060 ↗
17. Microstructure, mechanical, and corrosion properties of cast heat-resistant Al–4Zn–4Mg–4Cu–Zr–Y(Er) alloy
18. Novel cast and wrought Al-3Zn-3Mg-3Cu-Zr-Y(Er) alloys with improved heat resistance10.3390/met13050909 ↗
19. Microstructure and phase composition of novel crossover Al-Zn-Mg-Cu-Zr-Y(Er) alloys with equal Zn/Mg/Cu ratio and Cr addition10.3390/met14050547 ↗
20. Metallurgical factors affecting fracture toughness of aluminum alloys[J]10.1007/BF02672285 ↗
21. Effect of Si addition on the precipitation and mechanical/electrical properties of dilute Al-Zr-Sc alloys[J]
22. Precipitation behaviors and thermal stability of Al-3.5Mg-1.0Cu alloy with co-addition of Zn and Si[J]10.1016/j.jallcom.2023.169401 ↗
23. Microstructure, mechanical properties and fatigue crack growth behavior of an Al-Zn-Mg-Cu-Si-Zr-Er alloy fabricated by laser powder bed fusion[J]10.1016/j.ijfatigue.2023.107636 ↗
24. Effect of direct aging treatment on microstructure, mechanical and corrosion properties of a Si-Zr-Er modified Al-Zn-Mg-Cu alloy prepared by selective laser melting technology[J]10.1016/j.matchar.2022.112459 ↗
25. The microstructure regulation and property enhancement of directed energy deposited Al-Zn-Mg-Cu alloy modified with fixed Si fraction and various TiC contents[J]
26. GPB-II zone in Si microalloyed Al -Zn-Mg-Cu alloy and its strengthening effect[J]10.1016/j.msea.2022.143721 ↗
27. Synergistic strengthening by β″ and η′ phases in Al-Mg-Si-Cu-Zn alloys[J]10.1016/j.matlet.2021.131213 ↗
28. Influence of asymmetric rolling process and thickness reduction on the microstructure and mechanical properties of the Al–Mg-Si alloy[J]10.1007/s12540-021-01050-2 ↗
29. Precipitation hardening of an Al–4.2 wt% Mg–0.6 wt% Cu alloy[J]10.1016/S1359-6454(98)00033-0 ↗
30. Atomic scale imaging and analysis of T' precipitates in Al-Mg-Zn alloys[J]10.1051/mmm:1997109 ↗
31. The synergetic effect of Si and Sc on the thermal stability of the precipitates in AlCuMg alloy[J]10.1016/j.msea.2020.139319 ↗
32. The influence of Sc–Si clusters on aging hardening behavior of dilute Al-Sc-(Zr)-(Si) alloy[J]10.1016/j.jallcom.2020.155826 ↗
33. A HRTEM study of metastable phase formation in Al–Mg–Cu alloys during artificial aging[J]10.1016/j.actamat.2004.01.041 ↗
34. GPB zones and composite GPB/GPBII zones in Al-Cu-Mg alloys[J]
35. Diffusion coefficients of some solute in FCC and liquid Al: critical evaluation and correlation10.1016/S0921-5093(00)00675-4 ↗
36. First-principles calculation of interaction energies between solutes and/or vacancies for predicting atomistic behaviors of microalloying elements in aluminum alloys[J]
37. Weng · Prog Nat Sci · 2018 · 28 · 36310.1016/j.pnsc.2018.04.007 ↗
38. Computer simulation of the evolution of the microstructure of the early aging of Al-4.0Cu-0.3Mg[J]
39. Sc and Si effect on the early microstructural evolution of Al-Mg-Cu alloy
40. Effects of Cu and Al on the crystal structure and composition of η (MgZn2) phase in over-aged Al-Zn-Mg-Cu alloys[J]10.1007/s10853-012-6428-9 ↗
41. Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys[J]10.1016/j.actamat.2009.09.003 ↗
42. Role of grain-boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 7150[J]10.5006/1.3287699 ↗