Mechanical, tribological, and corrosion behavior of laser powder-bed fusion 316L stainless steel parts: Effect of build orientation
Source abstract
Abstract
In this study, 316L stainless steel Laser Powder Bed Fusion (LPBF) samples were manufactured under three different building orientations (0°, 45°, and 90°). Mechanical, microstructural, tribological and corrosion resistance properties were analyzed for all samples. The results demonstrate that the build orientation significantly influences the microstructure, resulting in variations in grain size, texture and defect distribution. Specifically, 0° (Horizontal) samples exhibited excellent mechanical properties, including ultimate tensile strength of 784 MPa and a hardness of 292 HV, while the vertical (90°) samples showed enhanced wear resistance, characterized by reduction in the coefficient of friction. Corrosion resistance was found to be highest in the 0° samples, with a corrosion current density of 0.650 μA/cm 2 , compared to 1.580 μA/cm 2 in the 90° samples. The results from this study show the non-linear effects of build orientation for certain properties and indicates that individual studies are not sufficient to predict the performance of LPBF parts. Therefore, combined studies are required for orientation-based optimization of the mechanical, tribological and corrosion properties of LPBF parts. This study offers valuable insights into the relationship between build orientation and material properties, providing a pathway to tailor the properties of LPBF parts for specific applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
2. Additive manufacturing — a review of 4D printing and future applications
3. Bio-based polycarbonates: progress and prospects10.1039/D3SU00248A ↗
4. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
5. Selective laser melting of 316L stainless steel: physics of melting mode transition and its influence on microstructural and mechanical behavior10.1007/s11837-018-3271-8 ↗
6. Optimization of extrusion based ceramic 3D printing process for complex bony designs10.1016/j.matdes.2018.11.054 ↗
7. Additive manufacturing of aisi 316L stainless steel: a review10.3390/met13081370 ↗
8. Process parameter selection and optimization of laser powder bed fusion for 316L stainless steel: a review10.1016/j.jmapro.2021.12.064 ↗
9. Microstructure and high temperature tensile properties of 316L fabricated by laser powder-bed fusion
10. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
11. A review on tribological behaviour of 3D printed mechanical components10.2478/bipcm-2022-0024 ↗
12. Corrosion behaviour of 316L stainless steel manufactured by selective laser melting10.1002/maco.201910792 ↗
13. Effect of build orientation on microstructure and tensile behaviour of selectively laser melted M300 maraging steel
14. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel10.1016/j.matdes.2021.109999 ↗
15. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel10.1016/j.matdes.2021.109999 ↗
16. Building direction dependence of wear resistance of selective laser melted AISI 316L stainless steel under high-speed tribological environment10.1007/s00170-020-05572-8 ↗
17. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
18. K. Chang Bae, K. Sik Ha, Y. Hwan Kim, J.-J. Oak, W. Lee, Y. Ho Park, Building direction dependence of wear resistance of selective laser melted AISI 316L stainless steel under high-speed tribological environment, (n.d.). https://doi.org/10.1007/s00170-020-05572-8/Published.
19. Microstructure and mechanical property of additively manufactured NiTi alloys: a comparison between selective laser melting and directed energy deposition10.1007/s11771-021-4677-y ↗
20. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
21. Effects of laser-energy density and build orientation on the structure–property relationships in as-built Inconel 718 manufactured by laser powder bed fusion
22. Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel10.1016/j.msea.2018.10.051 ↗
23. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
24. Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion10.1016/j.matchar.2020.110309 ↗
25. Investigating build orientation-induced mechanical anisotropy in additive manufacturing 316L stainless steel
26. Effects of process parameters and scan strategy on the microstructure and density of stainless steel 316 L produced via laser powder bed fusion10.1016/j.jalmes.2023.100027 ↗
27. Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel10.1007/s11665-013-0784-8 ↗
28. Dry sliding wear behavior of 316 L stainless steel produced by laser powder bed fusion: a comparative study on test temperature
29. On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting10.1016/j.corsci.2020.109149 ↗
30. Effects of crystallographic orientation on the corrosion behavior of stainless steel 316L manufactured by laser powder bed fusion10.1016/j.corsci.2021.110009 ↗
31. Al-Deheish · 2022
32. Yousif · 2024
33. Concept Laser_M2 Series 5_Machine | GE Additive, (n.d.). https://www.ge.com/additive/additive-manufacturing/machines/m2series5 (accessed March 5, 2024).
34. Tribological behavior of TiN/TiAlN, CrN/TiAlN, and CrAlN/TiAlN coatings at elevated temperature10.1007/s11665-022-06722-7 ↗
35. Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling10.1016/j.jmrt.2022.07.121 ↗
36. Understanding melt pool characteristics in laser powder bed fusion: an overview of single- and multi-track melt pools for process optimization10.1016/j.apmate.2023.100137 ↗
37. A state of the art on surface morphology of selective laser-melted metallic alloys10.1007/s00170-023-11534-7 ↗
38. The evaluation of the influence of laser treatment parameters on the type of thermal effects in the surface layer microstructure of gray irons10.1016/j.optlastec.2015.07.016 ↗
39. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts10.1016/j.matdes.2016.03.111 ↗
40. A comparison on self-seeding and isothermal crystallization of polyethylene in solution using small angle neutron scattering10.1016/j.polymer.2015.02.008 ↗
41. Effects of build orientations on microstructure evolution, porosity formation, and mechanical performance of selective laser melted 17-4 PH stainless steel10.3390/met12111968 ↗
42. Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting10.1016/j.msea.2019.05.013 ↗
43. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
44. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties10.1016/j.matdes.2016.12.060 ↗
45. An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of Selective Laser Melting 316L Stainless Steel
46. Comprehensive effects of placement orientation and scanning angle on mechanical properties and behavior of 316L stainless steel based on the selective laser melting process10.1016/j.jallcom.2019.03.082 ↗
47. The effect of build direction and heat treatment on atmospheric stress corrosion cracking of laser powder bed fusion 316L austenitic stainless steel
48. Scratch and wear resistance of additive manufactured 316L stainless steel sample fabricated by laser powder bed fusion technique
49. Rheological properties of polymer
50. Structural performance of additive manufactured metallic material and cross-sections10.1016/j.jcsr.2017.05.002 ↗
51. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
52. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
53. Anisotropic mechanical behavior of additive manufactured AISI 316L steel10.1007/s11661-019-05139-7 ↗
54. The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS10.1016/j.matdes.2020.108852 ↗
55. Influence of porosity and microstructure on mechanical and corrosion properties of a selectively laser melted stainless steel10.1016/j.jallcom.2020.154815 ↗
56. Build orientation effects on texture and mechanical properties of selective laser melting Inconel 71810.1007/s11665-019-03980-w ↗
57. Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel
58. Tribological performance of selective laser melted 316L stainless steel10.1016/j.triboint.2018.07.021 ↗
59. Physical, mechanical and dry sliding wear properties of an Al–Si–Mg–Ni–Cu alloy under different processing conditions10.1016/j.jallcom.2013.08.016 ↗
60. William D
61. Dependence of adhesion and friction on porosity in porous anodic alumina films10.1016/j.scriptamat.2008.01.001 ↗
62. Fundamentals of engineering surfaces10.1007/978-1-4614-1945-7_1 ↗
63. Effect of casting process on microstructure and tribological behavior of LM13 alloy10.1016/j.jallcom.2008.07.008 ↗
64. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution10.1016/j.corsci.2018.03.047 ↗
65. EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel10.1016/j.corsci.2020.108480 ↗
66. F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices, (n.d.). https://www.astm.org/f2129-19a.html (accessed July 18, 2023).
67. Hydrophobicity and improved localized corrosion resistance of grain boundary etched stainless steel in chloride-containing environment10.1149/2.1271702jes ↗
68. Effect of prior plastic deformation and deformation rate on the corrosion resistance of AISI 321 austenitic stainless steel10.1016/j.msea.2018.12.093 ↗
69. An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques10.1016/j.matchar.2020.110204 ↗
70. Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting10.1016/j.corsci.2019.108394 ↗
71. Microstructure, tribological properties and corrosion behaviour of additively manufactured 17-4PH stainless steel: effects of scanning pattern, build orientation, and single vs. Double scan
72. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
73. Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel
74. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
75. Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels10.1016/j.matchemphys.2011.07.064 ↗
76. Stability of spontaneous passive films on high strength Mo-containing stainless steels in aqueous solutions10.1007/s10800-006-9271-3 ↗
77. Influence of processing parameters and heat treatment on the mechanical properties of 18Ni300 manufactured by laser based directed energy deposition10.1016/j.optlastec.2018.03.011 ↗
78. Enhancement of corrosion resistance of a biomedical grade 316LVM stainless steel by potentiodynamic cyclic polarization10.1016/j.tsf.2006.11.054 ↗
79. Electrochemical evaluation of the corrosion protectiveness and porosity of vacuum annealed CrAlN and TiAlN cathodic arc physical vapor deposited coatings10.1002/maco.201810715 ↗
80. Microstructure and corrosion performance of 316L stainless steel fabricated by Selective Laser Melting and processed through high-pressure torsion10.1016/j.jallcom.2018.05.284 ↗