Study on mechanical, hydrophobic and corrosion resistant properties of methylsiloxan-based mortar modified by micro-nano supplementary cementitious materials
Source abstract
Abstract
Concrete with porous hydrophilic properties is easily attacked by corrosive ions, which seriously affects the durability of concrete structures. The incorporation of hydrophobic powder is beneficial to the durability of cementitious materials, but will reduce the mechanical properties. Based on this, the effects of silica fume (SF), nano silica (NS), and nano calcium carbonate (NC) on the improvement of mechanical properties, hydrophobic, and corrosion resistance of methylsiloxan-based hydrophobic powder (MSHP) modified mortar were studied, and the hydration products , micromorphology, and pore structure of mortar were also characterized. The results show that the addition of MSHP can prolong the setting time of mortar, while micro-nano supplementary cementitious materials can shorten the setting time. The addition of NS helps to increase the compressive strength of mortar, and the compressive strength at 28 d increases by 9.4%, up to 60.4 MPa. Meanwhile, the addition of NC and SF helps to increase the compressive strength at early stage, but not conducive to the improvement of compressive strength at later stage. When 4% MSHP is added, the mortar mixed without supplementary cementitious materials and with SF and NS have superhydrophobic performance, and the water contact angle reaches 150.7°, 151.7°, and 152.4°, respectively, while the mortar mixed with NC cannot obtain the superhydrophobic performance and the water contact angle is only 139.7°. MSHP can significantly improve the corrosion resistance of mortar and the addition of SF and NS can further enhance this performance, while the addition of NC is not conducive to the improvement of corrosion resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. A survey on the effects of deicing materials on properties of Cement-based materials10.1016/j.conbuildmat.2021.126062 ↗
2. Influence of deicing salt on the surface properties of concrete specimens after 20 years10.1016/j.conbuildmat.2021.123643 ↗
3. Effect of calcium stearate hydrophobic agent on the performance of mortar and reinforcement corrosion in mortar with cracks10.1016/j.conbuildmat.2024.138684 ↗
4. Fabrication of all-dimensional superhydrophobic mortar with enhanced waterproof ability and freeze-thaw resistance10.1016/j.conbuildmat.2019.117626 ↗
5. Effect of modified rubber powder on the mechanical properties of cement-based materials10.1016/j.jmrt.2022.06.070 ↗
6. Physical-mechanical properties and microstructure changes in mortars with chemically treated coir fibers10.1016/j.jmrt.2024.04.109 ↗
7. The driving force of water absorption in cementitious materials: an analysis of surface-free energies and pore structure10.1016/j.jmrt.2024.04.167 ↗
8. A systematic investigation of the waterproofing performance and chloride resistance of a self-developed waterborne silane-based hydrophobic agent for mortar and concrete10.1016/j.conbuildmat.2017.08.042 ↗
9. Design of SiO2/PMHS hybrid nanocomposite for surface treatment of cement-based materials10.1016/j.cemconcomp.2017.12.008 ↗
10. Influence of exposure environments and moisture content on water repellency of surface impregnation of cement-based materials10.1016/j.jmrt.2020.08.046 ↗
11. A fast-setting and eco-friendly superhydrophobic high belite sulphoaluminate cement mortar10.1016/j.jmrt.2023.01.160 ↗
12. Mechanical and permeability properties of polymer-modified concrete using hydrophobic agent
13. Fabrication of negative carbon superhydrophobic self-cleaning concrete coating: high added-value utilization of recycled powders10.1016/j.cemconcomp.2022.104882 ↗
14. Study of superhydrophobic concrete with integral superhydrophobicity and anti-corrosion property
15. Fabricating hydrophobic silica fume to improve mechanical strength and anti-corrosion of integral hydrophobic cement mortar and its carbon emission assessment10.1016/j.jclepro.2024.140857 ↗
16. The effect of silicon-based waterproof agent on the wettability of superhydrophobic concrete and enhanced corrosion resistance10.1016/j.conbuildmat.2021.125482 ↗
17. Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete10.1016/j.conbuildmat.2018.10.018 ↗
18. An experimental investigation of hydration mechanism of cement with silicane10.1016/j.conbuildmat.2018.01.164 ↗
19. Advanced characterisation of the early age behaviour of bulk hydrophobic mortars10.1016/j.conbuildmat.2020.120904 ↗
20. Influence of a novel hydrophobic agent on freeze–thaw resistance and microstructure of concrete10.1016/j.conbuildmat.2020.121294 ↗
21. Integral hydrophobic concrete without using silane10.1016/j.conbuildmat.2019.116678 ↗
22. Facile preparation of monolithic superhydrophobic concrete with excellent anti-corrosion property10.1016/j.matlet.2023.134441 ↗
23. Effect of nano-silica in concrete; a review
24. A comprehensive review of cementitious composites modified with nano silica: fabrication, microstructures, properties and applications10.1016/j.conbuildmat.2023.133922 ↗
25. Effect of nano calcium carbonate on hydration characteristics and microstructure of cement-based materials: a review
26. Preparation and properties of porous concrete based on geopolymer of red mud and yellow river sediment10.3390/ma17040923 ↗
27. Quantification and characterization of C-S-H in silica nanoparticles incorporated cementitious system10.1016/j.cemconcomp.2017.02.004 ↗
28. Durability studies of nano-engineered fly ash concrete10.1016/j.conbuildmat.2018.11.022 ↗
29. Mortars with nano-SiO2 and micro-SiO2 investigated by experimental design10.1016/j.conbuildmat.2010.01.012 ↗
30. Influence of nanosilica and a polycarboxylate ether superplasticizer on the performance of lime mortars10.1016/j.cemconres.2012.10.007 ↗
31. On the pore structures of lightweight self-compacting concrete containing silica fume10.1016/j.conbuildmat.2018.09.080 ↗
32. Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica10.1016/j.conbuildmat.2014.02.039 ↗
33. Mechanisms underlying the strength enhancement of UHPC modified with nano-SiO2 and nano-CaCO310.1016/j.cemconcomp.2021.103992 ↗
34. Effect of silica fume and nano-silica on hydration behavior and mechanism of high sulfate resistance Portland cement10.1016/j.conbuildmat.2021.122481 ↗
35. A review on eminent application and performance of nano based silica and silica fume in the cement concrete
36. Systemic multi-scale approaches to predict the flowability at various temperature and mechanical properties of cement paste modified with nano-calcium carbonate10.1016/j.conbuildmat.2020.120777 ↗
37. 2021
38. 2011
39. 2019
40. Usherov-Marshak · 2010 · 108
41. Rebar corrosion investigation in rubber aggregate concrete via the chloride electro-accelerated test10.3390/ma12060862 ↗
42. Investigation of the corrosion-induced damage mechanism of steel fibers in ultra-high-performance steel fiber-reinforced concrete using X-ray computed tomography10.1016/j.conbuildmat.2023.130429 ↗
43. Study on physicochemical and anti-corrosion performance of methylsiloxane-based hydrophobic powder modified mortar10.1016/j.conbuildmat.2024.135999 ↗
44. Colloidal nanosilica promotes high-density calcium-silicate-hydrates in fine recycled concrete aggregate mortar10.1016/j.cemconres.2024.107498 ↗
45. Research on the performance of superhydrophobic cement-based materials based on composite hydrophobic agents10.3390/ma16196592 ↗
46. Hydration characteristics, structure evolution of marine cement composites with high durability modified by colloidal nano-silica for low carbon footprints
47. Comparison of eggshell powder blended cementitious materials with ASTM Type IL cement-based materials10.1016/j.cement.2024.100109 ↗
48. Effect of sodium sulfate and gypsum on performances of expansive grouting material with aluminum as expansion agent10.1016/j.conbuildmat.2023.132212 ↗
49. Potential use of nano calcium carbonate in polypropylene fiber reinforced recycled aggregate concrete: microstructures and properties evaluation10.1016/j.conbuildmat.2023.132871 ↗
50. Performance improvement in neutron-shielding ultra-high performance mortar prepared with alkaline-treated boron carbide
51. Alkylsiloxane/alkoxysilane sols as hydrophobic treatments for concrete: a comparative study of bulk vs surface application
52. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete10.1016/j.cemconcomp.2012.08.008 ↗
53. Robust solid slippery surface for anti-corrosion: experimental and simulation10.1016/j.porgcoat.2024.108250 ↗
54. Cement filled with phosphorescent materials for pavement: afterglow decay mechanism and properties10.1016/j.conbuildmat.2021.122798 ↗
55. Influence of silane on hydration characteristics and mechanical properties of cement paste10.1016/j.cemconcomp.2020.103743 ↗
56. Effect of elevated temperature on mechanical properties of limestone, quartzite and granite concrete10.1007/s40069-016-0175-2 ↗
57. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): methodology of calculating the degree of hydration10.1016/j.conbuildmat.2017.04.132 ↗
58. The physicochemical properties of Portland cement blended with calcium carbonate with different morphologies as a supplementary cementitious material10.1016/j.jclepro.2021.130309 ↗
59. Enhancing the performance of metakaolin blended cement mortar through in-situ production of nano to sub-micro calcium carbonate particles10.1016/j.conbuildmat.2018.11.134 ↗
60. Mechanical properties and micro mechanism of alkali-activated tannery sludge/fly ash composite cement-based recycled concrete10.1016/j.conbuildmat.2023.131813 ↗
61. Fabrication of superhydrophobic concrete with stable mechanical properties and self-cleaning properties
62. Characteristics analysis of long afterglow phosphor with SiO2 coating and evaluation its influence on the properties of self-luminescent cement-based materials10.1016/j.conbuildmat.2023.133402 ↗
63. Influence of silica fume on properties of fresh and hardened ultra-high performance concrete based on alkali-activated slag10.1016/j.cemconcomp.2019.03.023 ↗
64. Analysis of engineered cement paste using silica nanoparticles and metakaolin using 29Si NMR, water adsorption and synchrotron X-ray diffraction10.1016/j.conbuildmat.2018.05.272 ↗
65. Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume10.1016/j.conbuildmat.2019.117888 ↗
66. FTIR analysis of silica fume and iron dust added concrete10.1016/j.matpr.2022.04.131 ↗
67. Fast fabrication of superhydrophobic surfaces on hardened cement paste using sodium laurate aqueous solution10.1016/j.conbuildmat.2021.122385 ↗
68. Fabrication of superhydrophobic concrete used in marine environment with anti-corrosion and stable mechanical properties10.1016/j.conbuildmat.2020.118946 ↗
69. Mechanically stable superhydrophobic surface on cement-based materials10.1016/j.chemphys.2020.110912 ↗
70. Effectiveness of nanoparticles-based ultrahydrophobic coating for concrete materials
71. Influence of curing temperature on freeze-thaw resistance of limestone powder hydraulic concrete
72. Application of low-field NMR to the pore structure of concrete10.1007/s00723-020-01229-7 ↗
73. Spatiotemporal evolution of water and pore structure in cement-based material containing SRA by LF NMR
74. Monitoring and characterization of the polymer-filled pores in sand using nuclear magnetic resonance during air-drying10.1016/j.conbuildmat.2022.127568 ↗
75. The influence of blast furnace slag on the mechanical properties and mesoscopic damage mechanisms of recycled aggregate concrete compared to natural aggregate concrete at different ages
76. Development of a hydrophobic cement mortar with controllable strength: preparation and micro-mechanism analysis10.1016/j.conbuildmat.2023.133216 ↗
77. Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges10.1016/j.conbuildmat.2018.06.195 ↗
78. Crack shape and rust distribution in corrosion-induced cracking concrete10.1016/j.corsci.2011.11.002 ↗
79. Study of wiring method on accelerated corrosion of steel bars in concrete10.1016/j.conbuildmat.2020.121286 ↗
80. Control of crystalline phase and morphology of calcium carbonate by electrolysis: effects of current and temperature10.1016/j.ceramint.2019.04.103 ↗
81. Hydration and mechanical properties of high content nano-coated cements with nano-silica, clay and calcium carbonate10.1016/j.cemconres.2023.107132 ↗