journal article·2022-11Open access

Impact of different Cr contents on microstructural evolution and mechanical behaviour of CoCrxCuFeMnNiV high-entropy alloys

Wen He, Cong Zeng, Wei Yang, Weihua Chen, Yunlong Ai

Abstract

The CoCrxCuFeMnNiV (x = 0, 0.25, 0.5, 0.75, 1) high-entropy alloy was prepared via vacuum arc smelting, and the effect of different Cr contents on the microstructure evolution and mechanical properties of it was evaluated. The results show that the CoCuFeMnNiV alloy is composed of FCC1+FCC2 phases, while Cr-added CoCrxCuFeMnNiV alloy is composed of FCC1+FCC2+sigma phases; moreover, the amount of sigma phase increases with the Cr content. Through calculations, a phase formation criterion suitable for the CoCrxCuFeMnNiV alloy was established. It was observed that adding Cr does not affect the early solidification behaviour of the FCC1 and FCC2 phases; however, it affects the stability of the FCC1 phase and promotes the transformation of this phase into the sigma phase, as well as secondary precipitation of a nanoscale copper-rich phase on this phase. The formation of sigma phase has a significant strengthening effect on the alloy but reduces its plasticity. The CoCr0.5CuFeMnNiV alloy has favourable comprehensive properties; specifically, its yield strength, compressive strength, microhardness, and fracture strain are 820 MPa, 1050 MPa, 320 HV, and 22.5%, respectively. With an increase in Cr content, the alloy fracture mode changes from ductile to brittle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
5. Effect of twinning on the orientation dependence of mechanical behaviour and fracture in single crystals of the equiatomic CoCrFeMnNi high-entropy alloy at 77K10.1016/j.msea.2020.139315 ↗
6. Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition10.1016/j.scriptamat.2021.113898 ↗
7. Tunability of the mechanical properties of (Fe50Mn27Ni10Cr13)100-xMox high-entropy alloys via secondary phase control10.1016/j.jmst.2020.09.029 ↗
8. Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
9. Effect of niobium alloying on the microstructure, phase stability and mechanical properties of CoCrFeNi2.1Nbx high entropy alloys: experimentation and thermodynamic modeling10.1016/j.msea.2020.139897 ↗
10. Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition10.1016/j.jmst.2018.10.009 ↗
11. Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys10.1016/j.jallcom.2014.12.157 ↗
12. Crystal chemistry and Calphad modeling of the σ phase10.1016/j.pmatsci.2007.04.001 ↗
13. Grain refinement of non-equiatomic Cr-rich CoCrFeMnNi high-entropy alloys through combination of cold rolling and precipitation of σ phase10.1016/j.msea.2018.08.038 ↗
14. High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy10.1016/j.msea.2020.139580 ↗
15. Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy10.1016/j.msea.2018.11.136 ↗
16. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
17. Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification10.1016/j.jmst.2019.08.019 ↗
18. High-entropy alloys10.1038/s41578-019-0121-4 ↗
19. Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy10.1016/j.actamat.2019.09.030 ↗
20. Experimental and theoretical investigations on the phase stability and mechanical properties of Cr7Mn25Co9Ni23Cu36 high-entropy alloy10.1016/j.actamat.2021.116763 ↗
21. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
22. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
23. Thermodynamic modelling of the σ and μ phases in several ternary systems containing Co, Cr, Fe, Mo, Re and W10.1016/j.jallcom.2020.156122 ↗
24. Precipitation behavior of the sigma phase with Ni and Mn content variations in superaustenitic stainless steel weld metal10.1016/j.matchar.2018.07.006 ↗
25. Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys10.1080/21663831.2013.831382 ↗
26. An assessment on the stability of the eutectic phases in high entropy alloys10.1016/j.jallcom.2019.05.241 ↗
27. A second criterion for sigma phase formation in high-entropy alloys10.1080/21663831.2015.1121168 ↗
28. Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys10.1016/j.intermet.2014.04.001 ↗
29. Solid solubilities in transition-metal-based f.c.c alloys10.1080/01418610.1985.12069159 ↗
30. Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys10.1016/j.msea.2012.06.075 ↗
31. New PHACOMP and its applications to alloy design
32. A criterion for topological close-packed phase formation in high entropy alloys10.3390/e17042355 ↗
33. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
34. Thermodynamics of concentrated solid solution alloys10.1016/j.cossms.2017.08.001 ↗
35. Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys10.1016/j.msea.2018.03.115 ↗
36. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
37. Microstructure and mechanical behaviors of GdxCoCrCuFeNi high-entropy alloys[J]10.1016/j.msea.2017.09.102 ↗
38. Fracture of sigma phase containing Co–Cr–Ni–Mo medium entropy alloys10.1016/j.jallcom.2020.156189 ↗
39. Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels10.1016/j.actamat.2014.10.010 ↗
40. Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys10.1016/j.jmst.2017.07.013 ↗
41. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
42. Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties10.1016/j.intermet.2016.06.011 ↗
43. A general formulation for solid solution hardening effect in multicomponent alloys10.1016/j.scriptamat.2016.09.009 ↗