journal article·2023-07Open access

Temperature-dependent deformation and fracture properties of low-carbon martensitic steel in different stress states

Zhen Zhang, Fuhui Shen, Hanqing Liu, Markus Könemann, Sebastian Münstermann

Abstract

The temperature-dependent ductile-brittle transition (DBT) in low-carbon martensitic steel is investigated in different stress states. To capture the effects of the stress state, tensile tests have been performed with flat specimens and three-point bending tests have been conducted with Charpy specimens at dynamic (impact) and quasi-static loading rates, covering a broad temperature range of 77 K–423 K. The results reveal that ductile-brittle transition temperature (DBTT) is significantly affected by stress triaxiality, wherein the transition temperature in uniaxial tension is ∼142 K lower than that in plane strain condition of Charpy specimens. The energy absorption capacity in the ductile resistance domain during three-point bending tests is sensitive to the loading rate. Moreover, dynamic strain aging poses a decrease in ductile resistance upon quasi-static loading when the temperature exceeds 323 K and thus without a specific upper shelf plateau. Tensile strength and ductility tend to increase with decreasing temperature, and the associated failure mode changes from shear-dominated to nearly pure tension due to the specific discrepancy of temperature influence on the critical normal and shear strengths, wherein the formation of shear bands that dominate the tensile deformation could be strictly inhibited by the formation of nanoscale dislocation cells based on dislocation analysis. The failure mechanisms in tensile tests correlate with the tensile specimens' macroscopic fracture angle. In the end, a new local parameter is proposed for temperature-dependent toughness estimation in tensile tests.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Effect of microstructure on strength and toughness of heat-treated low alloy structural steels10.1007/BF02665319 ↗
2. Some surprising features of the plastic deformation of body-centered cubic metals and alloys10.1007/BF02664806 ↗
3. Relative mobility of screw versus edge dislocations controls the ductile-to-brittle transition in metals10.1073/pnas.2110596118 ↗
4. The phenomena of rupture and flow in solids
5. Ductile-to-brittle transition in low-alloy steel: a combined experimental and numerical investigation10.1007/s11665-019-04173-1 ↗
6. Prediction of cleavage fracture in ferritic steels: a modified Weibull stress model10.1016/j.msea.2004.11.035 ↗
7. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
8. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
9. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
10. Size effects in the Charpy V-notch test10.1023/A:1020112028641 ↗
11. Modeling ductile to brittle fracture transition in steels—micromechanical and physical challenges10.1007/s10704-008-9232-4 ↗
12. Intrinsic impact toughness of relatively high strength alloys10.1016/j.actamat.2017.09.064 ↗
13. Plastic flow properties and fracture toughness characterization of unirradiated and irradiated tempered martensitic steels10.1016/j.jnucmat.2007.03.038 ↗
14. Correlation between KIC and Charpy V-notch test results in the transition temperature range
15. State-of-the-art review of fracture control technology for modern and vintage gas transmission pipelines10.1016/j.engfracmech.2015.05.055 ↗
16. Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model10.1016/j.engfracmech.2020.106900 ↗
17. The differences of damage initiation and accumulation of DP steels: a numerical and experimental analysis10.1007/s10704-020-00457-z ↗
18. A theoretical prediction framework for the construction of a fracture forming limit curve accounting for fracture pattern transition10.1016/j.ijplas.2020.102706 ↗
19. Local formability of medium-Mn steel10.1016/j.jmatprotec.2021.117368 ↗
20. A unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at –196°C10.1016/j.ijplas.2022.103365 ↗
21. Cryogenic ductile and cleavage fracture of bcc metallic structures–Influence of anisotropy and stress states10.1016/j.jmps.2023.105299 ↗
22. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
23. Using architectured materials to control localized shear fracture10.1016/j.actamat.2017.10.027 ↗
24. Maximum shear stress-controlled uniaxial tensile deformation and fracture mechanisms and constitutive relations of Sn–Pb eutectic alloy at cryogenic temperatures10.1016/j.msea.2021.141523 ↗
25. Strength, damage and fracture behaviors of high-nitrogen austenitic stainless steel processed by high-pressure torsion10.1016/j.scriptamat.2014.09.016 ↗
26. A universal fracture criterion for high-strength materials10.1038/srep01117 ↗
27. Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glasses10.1016/j.actamat.2014.05.052 ↗
28. Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures10.1016/j.actamat.2021.116982 ↗
29. Ductile-brittle transition in a 9% Cr heat-resistant steel10.1016/j.msea.2016.11.035 ↗
30. On the ductile-brittle transition in lath martensitic steel10.2355/isijinternational.51.1569 ↗
31. Microstructure and cleavage in lath martensitic steels10.1088/1468-6996/14/1/014208 ↗
32. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
33. Brittle-to-ductile transition in martensite–bainite Steel10.2355/isijinternational.ISIJINT-2020-757 ↗
34. Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures10.1016/j.ijplas.2018.02.002 ↗
35. Multiple mechanisms of lath martensite plasticity10.1016/j.actamat.2016.09.006 ↗
36. Dynamic strain aging caused by a new Peierls mechanism at high-temperature in iron10.1016/j.scriptamat.2014.09.019 ↗
37. Fracture resistance of advanced high-strength steel sheets for automotive applications10.1007/s11661-020-06119-y ↗
38. Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel10.1007/s11661-019-05265-2 ↗
39. On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel10.1016/j.ijpvp.2017.06.008 ↗
40. Rolfe · 1977
41. Loading rate effect on ductile crack resistance of steels using precracked Charpy specimens10.1016/j.ijpvp.2008.08.004 ↗
42. Dynamic strain aging in SA508-class 3 pressure vessel steel10.1016/0308-0161(95)93969-C ↗
43. Dynamic strain aging caused by a new Peierls mechanism at high-temperature in iron10.1016/j.scriptamat.2014.09.019 ↗
44. Shear localization in dynamic deformation: microstructural evolution10.1007/s11661-007-9431-z ↗
45. Comparison of deformation structure of lath martensite in low carbon and ultra-low carbon steels10.4028/www.scientific.net/MSF.558-559.933 ↗
46. Combining crystal plasticity and electron microscopy to elucidate texture dependent micro-mechanisms of tensile deformation in lath martensitic steel10.1016/j.ijplas.2022.103251 ↗
47. Low cycle fatigue properties and microstructure of P92 ferritic-martensitic steel at room temperature and 873 K10.1016/j.matchar.2019.109923 ↗
48. A procedure for determining the true stress–strain curve over a large range of strains using digital image correlation and finite element analysis10.1016/j.mechmat.2011.02.007 ↗
49. Unified tensile fracture criterion10.1103/PhysRevLett.94.094301 ↗
50. High-cycle fatigue properties and damage mechanisms of pre-strained Fe-30Mn-0.9C twinning-induced plasticity steel10.1016/j.msea.2016.10.043 ↗
51. Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation10.1016/j.jallcom.2020.156931 ↗
52. Large tensile plasticity in Zr-based metallic glass/stainless steel interpenetrating-phase composites prepared by high pressure die casting10.1016/j.compositesb.2021.109226 ↗
53. Characteristics of lath martensite: Part I. Crystallographic and substructural features10.1007/BF02644284 ↗
54. Dislocation screening and the brittle-to-ductile transition: a Kosterlitz-Thouless type instability10.1103/PhysRevLett.73.684 ↗
55. Change in dislocation characteristics with cold working in ultralow-carbon martensitic steel10.2355/isijinternational.ISIJINT-2016-140 ↗
56. The dependences of deformation temperature on the strain-hardening characteristics and fracture behavior of Mn–N bearing lean duplex stainless steel10.1016/j.msea.2021.141440 ↗
57. Advanced high strength steel: deciphering local and global formability
58. Excellent tensile local deformability and toughness of a tempered low carbon-low alloy steel with multilevel boundaries10.1016/j.msea.2022.143195 ↗