journal article·2023-09Open access

Effect of static elastic stress on the corrosion behavior of 7A04 aluminum alloy exposed to real marine atmospheric environment

Jie Zhou, Bin Wang, Chunmiao Liu, Jie Liu

Abstract

Aluminum alloy structural materials are widely subjected to the interactive effect of atmospheric corrosion under thin liquid film and elastic stress during the actual service. This study utilized the real marine atmospheric environment as the corrosion environment of thin liquid film for 7A04 aluminum alloy, and the specially designed outdoor device was used to apply varying levels of static elastic tensile stress at the same time, and then the corrosion damage behavior of 7A04 alloy under the interactive effect was studied. The research indicates that the 7A04 alloy suffers from pitting and exfoliation corrosion under the test conditions. The applied elastic tensile stress can accelerate the corrosion damage process of 7A04 alloy, and the degree of acceleration increases with increasing stress levels and exposure time. Moreover, the applied stress can also significantly accelerate the deterioration of the mechanical properties of 7A04 alloy, which has a more prominent effect on the elongation after fracture. Additionally, the corrosion mechanism of 7A04 alloy under the interactive effect was also discussed in this paper.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Testing, modelling and design of 7A04-T6 high-strength aluminum alloy RHS columns under axial compression
2. Mechanical property and characterization of 7A04-T6 aluminum alloys bonded by friction stir welding10.1016/j.jmapro.2020.02.018 ↗
3. Recent development in aluminum alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
4. Revealing of corrosion behavior of GH4169 under the alternate environment of intermediate temperature NaCl spraying and marine atmosphere10.1016/j.jmrt.2022.12.081 ↗
5. Corrosion and pitting behavior of pure aluminum 1060 exposed to Nansha Islands tropical marine atmosphere10.1016/S1003-6326(22)65806-0 ↗
6. Synergistic effect of stray current and stress on corrosion of API X65 steel10.1016/j.jngse.2014.09.007 ↗
7. A novel observation of the interaction between the macroelastic stress and electrochemical corrosion of low carbon steel in 3.5 wt% NaCl solution10.1016/j.electacta.2012.08.079 ↗
8. Corrosion behavior of low-carbon bainitic steel under a constant elastic load10.1016/j.corsci.2010.06.021 ↗
9. Mechanism of the acceleration of the electrodic dissolution of metals during yielding under stress10.1063/1.1670162 ↗
10. Effect of the strain sign in corrosion under stress10.1070/MC2004v014n02ABEH001875 ↗
11. Effect of strain rate on cathodic reaction during stress corrosion cracking of X70 pipeline steel in a near-neutral pH solution10.1007/s11665-010-9770-6 ↗
12. An experimental investigation of corrosion of X100 pipeline steel under uniaxial elastic stress in a near-neutral pH solution10.1016/j.corsci.2012.02.022 ↗
13. The corrosion behavior of the 6061 Al alloy in simulated Nansha marine atmosphere10.1016/j.jmrt.2022.05.066 ↗
14. Effects of inhomogeneous elastic stress on corrosion behavior of Q235 steel in 3.5% NaCl solution using a novel multi-channel electrode technique10.1016/j.corsci.2016.04.017 ↗
15. Corrosion behavior of steel with different microstructures under various elastic loading conditions10.1016/j.corsci.2013.06.012 ↗
16. Electrochemical investigation of corrosion and repassivation of structural aluminum alloys under permanent load in bending10.1515/corrrev-2017-0068 ↗
17. Effect of aging treatment on microstructure and corrosion behavior of Al-Zn-Mg aluminum alloy in aqueous solutions with different aggressive ions10.1016/j.jmst.2019.09.030 ↗
18. On the heat treatment and mechanical properties of a high solute Al-Zn-Mg alloy processed through laser powder bed fusion process10.1016/j.msea.2021.140857 ↗
19. Investigation of dealloying of S phase(Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging10.1016/j.corsci.2015.11.013 ↗
20. Loca-lized corrosion behavior associated with Al7Cu2Fe inter-metallic in Al-Zn-Mg-Cu-Zr alloy10.1016/j.jallcom.2018.12.151 ↗
21. Fungi corrosion of high-strength aluminum alloys with different microstructures caused by marine Aspergillus terreus under seawater drop10.1016/j.corsci.2023.110960 ↗
22. Long-term corrosion behavior of the 7A85 aluminum alloy in an industrial-marine atmospheric environment10.1016/j.jmrt.2021.03.085 ↗
23. Atmospheric corrosion of ZnAlMg coated steel during long term atmospheric weathering at different worldwide exposure sites10.1016/j.corsci.2018.12.033 ↗
24. A study of corrosion and pitting initiation of AA2024-T3 using atomic force microscopy10.1149/1.1471546 ↗
25. Thermodynamics of the mechanico-chemical effect: I. Derivation of basic equations10.1007/BF00714772 ↗
26. Thermodynamics of the mechanico-chemical effect: II. The range of operation of nonlinear laws10.1007/BF00714947 ↗
27. Modeling on the molar volume of the Al–Cu–Mg–Si system10.1016/j.calphad.2019.101693 ↗
28. Crack nucleation from a single notch caused by stress-dependent surface reactions10.1016/j.ijsolstr.2004.11.010 ↗
29. Deformation mechanism in particulate metal matrix composites10.1016/j.jallcom.2021.161512 ↗
30. Synergistic effect of sulfate-reducing bacteria and elastic stress on corrosion of X80 steel in soil solution10.1016/j.corsci.2014.01.017 ↗
31. Effects of dissolved hydrogen and elastic and plastic deformation on active dissolution of pipeline steel in anaerobic groundwater of near-neutral pH10.1016/j.actamat.2008.08.035 ↗
32. The influence of CO2, AlCl3·6H2O, MgCl2·6H2O, Na2SO4 and NaCl on the atmospheric corrosion of aluminum10.1016/j.corsci.2005.05.027 ↗
33. Naumkin · 2012
34. On the corrosion of a high solute Al-Zn-Mg alloy produced by laser powder bed fusion10.1016/j.corsci.2021.109626 ↗
35. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy10.1016/j.corsci.2020.109174 ↗
36. Long-term atmospheric corrosion of aluminum alloy 2024-T4 in coastal environment: surface and sectional corrosion behavior10.1016/j.jallcom.2019.03.028 ↗
37. Corrosion behavior of anodized 7b50 aluminum alloy in different atmospheric environments10.20964/2019.08.96 ↗
38. Long-term atmospheric corrosion behaviour of aluminium alloys 2024 and 7075 in urban, coastal and industrial environments10.1016/j.corsci.2009.01.016 ↗
39. In situ and operando AFM and EIS studies of anodization of Al 6060: influence of intermetallic particles10.1149/2.0061610jes ↗
40. Effects of Cl−, NO3− and SO4− ions on anodic dissolution of pure aluminium in alkaline solution10.1016/S0010-938X(98)00132-2 ↗
41. Investigation of long-term corrosion of AA2024 and AA5119 aluminum alloys under chromate coating in marine atmosphere by electrochemical impedance technology
42. Natural atmospheric deposition of molybdenum: a global model and implications for tropical forests10.1007/s10533-020-00671-w ↗
43. Precipitation of molybdenum from euxinic waters and the role of organic matter10.1016/j.chemgeo.2019.02.001 ↗
44. The molybdenum isotopic composition of the modern ocean
45. Competitive adsorption of molybdenum in the presence of phosphorus or sulfur on gibbsite10.1097/SS.0b013e3181d3462f ↗
46. Effect of relative humidity on corrosion of steel under sea salt aerosol proxies: I. NaCl10.1149/2.0221410jes ↗
47. A study by electrochemical impedance spectroscopy and surface analysis of corrosion product layers formed during CO2 corrosion of low alloy steel10.1016/j.corsci.2020.108666 ↗
48. Research on AC corrosion behavior and corrosion product film evolution of X70 steel under the combined action of AC interference and CP10.1016/j.corsci.2022.110085 ↗
49. Model for corrosion of metals covered with thin electrolyte layers: pseudo-steady state diffusion of oxygen10.1016/j.electacta.2011.05.009 ↗
50. The effect of molybdate concentration and hydrodynamic effect on mild steel corrosion inhibition in simulated cooling water10.1016/j.corsci.2005.06.009 ↗
51. The synergistic inhibitions of tungstate and molybdate anions on pitting corrosion initiation for Q235 carbon steel in chloride solution10.3390/ma15248986 ↗